Added custom FPV top plate

Quanum Trifecta/fpv_top.scad

@@ -0,0 +1,173 @@
+/*
+ * Created by:
+ * Thomas Buck <xythobuz@xythobuz.de> in June 2016
+ *
+ * Licensed under the
+ * Creative Commons - Attribution - Share Alike license.
+ */
+
+// -----------------------------------------------------------
+
+dist_x = 44;
+dist_y = 68.5;
+height = 35;
+base_height = 2;
+diameter = 6.5;
+hole = 2.5;
+cuts = 4;
+
+vtx_width = 21;
+vtx_height = 28;
+vtx_x = ((dist_x - vtx_width) / 2) - 3;
+vtx_y = 2;
+vtx_off_1 = 0.15;
+vtx_off_2 = 0.5;
+
+osd_width = 51;
+osd_height = 24;
+osd_x = (dist_x - osd_width) / 2;
+osd_y = dist_y - osd_height - 6;
+osd_off_1 = 0.3;
+osd_off_2 = 0.7;
+
+display_hole = 3;
+display_width = 6;
+display_length = 6;
+display_depth = 2;
+display_depth_add = 2;
+display_dist = 21;
+display_off_x = 13;
+display_off_y = 2.23;
+display_off_z = -3.08;
+display_angle = 35;
+
+add_handle = 0; // [0,1]
+handle = 3;
+
+helper_plate = 0.2;
+
+$fn = 25;
+
+// -----------------------------------------------------------
+
+module leg() {
+    difference() {
+        cylinder(d = diameter, h = height);
+        
+        translate([0, 0, -1])
+            cylinder(d = hole, h = height + 2);
+    }
+}
+
+module legs() {
+    leg();
+    
+    translate([dist_x, 0, 0])
+        leg();
+    
+    translate([dist_x, dist_y, 0])
+        leg();
+    
+    translate([0, dist_y, 0])
+        leg();
+}
+
+module handle() {
+    rotate([90, 0, 0])
+    translate([dist_x / 2, dist_y / 2 + handle / 2, base_height])
+    difference() {
+        cylinder(d = dist_x, h = handle);
+        translate([0, 0, -1])
+            cylinder(d = dist_x - handle, h = handle + 2);
+        translate([-dist_x / 2, -dist_x / 2, -1])
+            cube([dist_x, dist_x / 2, handle + 2]);
+    }
+}
+
+module display_nub() {
+    translate([0, 0, -display_depth_add])
+    difference() {
+        cube([display_width, display_length, display_depth + display_depth_add]);
+        translate([display_width / 2, display_width / 2, -1])
+            cylinder(d = display_hole, h = display_depth + display_depth_add + 2);
+    }
+}
+
+module display() {
+    translate([display_off_x, -display_length + display_off_y, display_off_z])
+    rotate([display_angle, 0, 0])
+    union() {
+        display_nub();
+        translate([display_dist, 0, 0])
+            display_nub();
+    }
+}
+
+module base() {
+    difference() {
+        cube([dist_x, dist_y, base_height]);
+        
+        // VTX holes
+        translate([vtx_x - (cuts / 2), vtx_y + (cuts / 2) + (vtx_off_1 * vtx_height), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([vtx_x - (cuts / 2), vtx_y + (cuts / 2) + (vtx_off_2 * vtx_height), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([vtx_x + (cuts / 2) + vtx_width, vtx_y + (cuts / 2) + (vtx_off_1 * vtx_height), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([vtx_x + (cuts / 2) + vtx_width, vtx_y + (cuts / 2) + (vtx_off_2 * vtx_height), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        // OSD holes
+        translate([osd_x - (cuts / 2) + (osd_off_1 * osd_width), osd_y - (cuts / 2), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([osd_x - (cuts / 2) + (osd_off_2 * osd_width), osd_y - (cuts / 2), -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([osd_x - (cuts / 2) + (osd_off_1 * osd_width), osd_y + (cuts / 2) + osd_height, -1])
+            cylinder(d = cuts, h = base_height + 2);
+        
+        translate([osd_x - (cuts / 2) + (osd_off_2 * osd_width), osd_y + (cuts / 2) + osd_height, -1])
+            cylinder(d = cuts, h = base_height + 2);
+    }
+    
+    translate([-diameter / 2, -diameter / 2, base_height - helper_plate])
+        cube([dist_x + diameter, dist_y + diameter, helper_plate]);
+    
+    cylinder(d = diameter, h = base_height);
+    
+    translate([dist_x, 0, 0])
+        cylinder(d = diameter, h = base_height);
+    
+    translate([dist_x, dist_y, 0])
+        cylinder(d = diameter, h = base_height);
+    
+    translate([0, dist_y, 0])
+        cylinder(d = diameter, h = base_height);
+    
+    display();
+    
+    if (add_handle) {
+        handle();
+    }
+}
+
+// -----------------------------------------------------------
+
+translate([dist_x, 0, base_height + height])
+rotate([0, 180, 0])
+union() {
+    legs();
+    
+    translate([0, 0, height])
+        base();
+    
+    %translate([vtx_x, vtx_y, height + base_height])
+        cube([vtx_width, vtx_height, 5]);
+    
+    %translate([osd_x, osd_y, height + base_height])
+        cube([osd_width, osd_height, 10]);
+}