Updated example Cura configs

Cura_CTC_i3_Pro_B.ini

 retraction_enable = True
 solid_layer_thickness = 0.8
 fill_density = 40
-print_speed = 50
+print_speed = 60
 print_temperature = 195
 print_temperature2 = 0
 print_temperature3 = 0
 retraction_min_travel = 1.5
 retraction_combing = All
 retraction_minimal_extrusion = 0.02
-retraction_hop = 0.0
+retraction_hop = 0.08
 bottom_thickness = 0.3
 layer0_width_factor = 110
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 150
-bottom_layer_speed = 40.0
+bottom_layer_speed = 50.0
 infill_speed = 0.0
 solidarea_speed = 0.0
 inset0_speed = 0.0
 insetx_speed = 0.0
-cool_min_layer_time = 20
+cool_min_layer_time = 10
 fan_enabled = True
 skirt_line_count = 3
 skirt_gap = 3.0
 skirt_minimal_length = 150.0
 fan_full_height = 1.5
-fan_speed = 80
+fan_speed = 30
 fan_speed_max = 100
 cool_min_feedrate = 10
 cool_head_lift = False
 	M109 S{print_temperature}     ;Heat extruder and wait
 	G1 Z5.0 F{travel_speed}        ;move the platform down 5mm
 	G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
-	G1 Z0.3 F{travel_speed}        ;move Z to first layer height
+	G1 Z0.15 F{travel_speed}        ;move Z to first layer height
 	G92 E0                   ;zero the extruded length
-	G1 X30.0 E3 F400         ;extrude 3mm of feed stock and move X 20mm
+	G1 X30.0 E3 F300         ;extrude 3mm of feed stock and move X 20mm
 	G92 E0                   ;zero the extruded length again
 	G1 Z10.0 F{travel_speed} ;move platform down 5mm more
 	G1 F{travel_speed}

Cura_Fabrikator_Mini.ini

 wall_thickness = 0.8
 retraction_enable = True
 solid_layer_thickness = 0.8
-fill_density = 100
+fill_density = 40
 print_speed = 20
 print_temperature = 190
 print_temperature2 = 0
 retraction_speed = 40.0
 retraction_amount = 4.5
 retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
+retraction_min_travel = 1.0
 retraction_combing = All
 retraction_minimal_extrusion = 0.02
-retraction_hop = 0.0
+retraction_hop = 0.08
 bottom_thickness = 0.3
-layer0_width_factor = 120
+layer0_width_factor = 110
 object_sink = 0.0
 overlap_dual = 0.12
 travel_speed = 30.0
 cool_min_layer_time = 15
 fan_enabled = True
 skirt_line_count = 3
-skirt_gap = 0.75
+skirt_gap = 1.0
 skirt_minimal_length = 300.0
 fan_full_height = 0.5
 fan_speed = 100
 object_center_y = -1
 
 [alterations]
-start.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M109 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	M104 S{print_temperature} ; begin heating nozzle
-	;G28 X0 Y0  ;move X/Y to min endstops
+start.gcode = ; Sliced at: {day} {date} {time}
+	; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+	; Print time: {print_time}
+	; Filament used: {filament_amount}m {filament_weight}g
+	; Filament cost: {filament_cost}
+	;M190 S{print_bed_temperature} ; Uncomment to add your own bed temperature line
+	;M109 S{print_temperature}     ; Uncomment to add your own temperature line
+	G21                           ; metric values
+	G90                           ; absolute positioning
+	M82                           ; set extruder to absolute mode
+	M107                          ; start with the fan off
+	M104 S{print_temperature}     ; begin heating nozzle
 	M140 S{print_bed_temperature} ; begin heating bed
-	;G28 Z0     ;move Z to min endstops
-	G28        ;home all axes, needed for mesh leveling!
-	G1 Z10.0 F{travel_speed} ;move the platform down 10mm
+	G28                           ; home all axes, needed for mesh leveling!
+	M420 S1                       ; enable mesh bed leveling
+	G1 Z10.0 F{travel_speed}      ; move the platform down 10mm
+	G1 X40 Y40 F{travel_speed}    ; move to center to avoid tape edge
 	M190 S{print_bed_temperature} ; Wait for bed temp
-	M109 S{print_temperature} ; Wait for nozzle temp
-	G92 E0                  ;zero the extruded length
-	G1 F200 E1              ;extrude 1mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	M420 S1 ; enable mesh bed leveling
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
+	M109 S{print_temperature}     ; Wait for nozzle temp
+	G92 E0                        ; zero the extruded length
+	G1 F200 E1                    ; extrude 1mm of feed stock
+	G92 E0                        ; zero the extruded length again
+	G1 F{travel_speed}            ; set default travel speed
+	; Put printing message on LCD screen
 	M117 Printing...
-end.gcode = ;End GCode
-	M104 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	;G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G1 Z+0.5 E-5 F{travel_speed} ;move Z up a bit and retract filament even more
-	;G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	G90                         ;absolute positioning
-	G1 X0 Y80                    ;move x/y without homing!
-	M84                         ;steppers off
-	;{profile_string}
+end.gcode = ; End GCode
+	M104 S0                      ; extruder heater off
+	M140 S0                      ; heated bed heater off (if you have it)
+	G91                          ; relative positioning
+	G1 E-1 F300                  ; retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-5 F{travel_speed} ; move Z up a bit and retract filament even more
+	G90                          ; absolute positioning
+	G1 X1 Y79                    ; move x/y without homing to keep leveling on
+	M84                          ; steppers off
+	; {profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}