Tweaked Cura config

Cura_Fabrikator_Mini.ini

@@ -3,14 +3,14 @@ layer_height = 0.2
 wall_thickness = 0.8
 retraction_enable = True
 solid_layer_thickness = 0.8
-fill_density = 15
+fill_density = 25
 print_speed = 20
 print_temperature = 190
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
 print_temperature5 = 0
-print_bed_temperature = 70
+print_bed_temperature = 65
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
@@ -32,9 +32,9 @@ retraction_combing = All
 retraction_minimal_extrusion = 0.02
 retraction_hop = 0.0
 bottom_thickness = 0.3
-layer0_width_factor = 110
+layer0_width_factor = 120
 object_sink = 0.0
-overlap_dual = 0.15
+overlap_dual = 0.12
 travel_speed = 30.0
 bottom_layer_speed = 18
 infill_speed = 20
@@ -62,17 +62,17 @@ support_xy_distance = 0.7
 support_z_distance = 0.15
 spiralize = False
 simple_mode = False
-brim_line_count = 5
+brim_line_count = 3
 raft_margin = 3.0
 raft_line_spacing = 3.0
 raft_base_thickness = 0.3
 raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
+raft_interface_thickness = 0.2
 raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.22
+raft_airgap_all = 0.2
+raft_airgap = 0.2
 raft_surface_layers = 2
-raft_surface_thickness = 0.27
+raft_surface_thickness = 0.2
 raft_surface_linewidth = 0.4
 fix_horrible_union_all_type_a = True
 fix_horrible_union_all_type_b = False
@@ -95,15 +95,16 @@ start.gcode = ;Sliced at: {day} {date} {time}
 	M82        ;set extruder to absolute mode
 	M107       ;start with the fan off
 	M104 S{print_temperature} ; begin heating nozzle
-	G28 X0 Y0  ;move X/Y to min endstops
+	;G28 X0 Y0  ;move X/Y to min endstops
 	M140 S{print_bed_temperature} ; begin heating bed
-	G28 Z0     ;move Z to min endstops
+	;G28 Z0     ;move Z to min endstops
+	G28        ;home all axes, needed for mesh leveling!
 	G1 Z10.0 F{travel_speed} ;move the platform down 10mm
 	M190 S{print_bed_temperature} ; Wait for bed temp
 	M109 S{print_temperature} ; Wait for nozzle temp
 	G92 E0                  ;zero the extruded length
-	;G1 F200 E1              ;extrude 1mm of feed stock
-	;G92 E0                  ;zero the extruded length again
+	G1 F200 E1              ;extrude 1mm of feed stock
+	G92 E0                  ;zero the extruded length again
 	G1 F{travel_speed}
 	;Put printing message on LCD screen
 	M117 Printing...
@@ -112,11 +113,12 @@ end.gcode = ;End GCode
 	M140 S0                     ;heated bed heater off (if you have it)
 	G91                                    ;relative positioning
 	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	;G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G1 Z+0.5 E-4 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
+	;G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G1 Z+0.5 E-5 F{travel_speed} ;move Z up a bit and retract filament even more
+	;G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
 	G90                         ;absolute positioning
+	G1 X0 Y80                    ;move x/y without homing!
+	M84                         ;steppers off
 	;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}