Parameterized Fan Holder

Y-Axis Fan/Fan_Holder.scad → Y-Axis Fan/Fan Holder.scad

@@ -26,9 +26,6 @@
 
 height = 25; // [14:26]
 
-// cut-out for new part in Fabrikator Mini V1.5
-fab_mini_v15 = "true"; // [true, false]
-
 // default for 25mm fan: 23
 fan_hole_diameter = 23; // [26]
 
@@ -44,13 +41,31 @@ fan_hole_angled = "true"; // [true, false]
 
 /* [Hidden] */
 
+bottom_arm_height = 2;
+bottom_arm_gap = 8;
+
+back_support_depth = 2;
+mid_left_cutout = 9;
+
+wall_size = 3;
 fan_angle = 10;
 
+nub_size = 1;
+nub_depth = 1;
+
+motor_width = 28.5;
+motor_depth = 27;
+
 $fn = 25;
 
 fan_screw_pos = fan_screw_distance / 2;
 fan_screw_neg = -fan_screw_pos;
 
+fabrikator_mini_v15_height = 20;
+mid_left_cutout_height = 5;
+
+base_height = 5;
+
 // -----------------------------------------------------------
 
 module ellipse(w, l, d) {
@@ -67,118 +82,113 @@ module ellipse(w, l, d) {
 
 // -----------------------------------------------------------
 
+// stepper motor
+%translate([nub_depth, wall_size, 0])
+    cube([motor_depth, motor_width, height + 1]);
+
 // bottom left arm
-if (fab_mini_v15 == "true") {
-    translate([0, 0, 8])
-        cube([30, 2, 2]);
-} else {
-    translate([0, 0, 8])
-        cube([30, 2, height - 8]);
-}
+translate([0, 0, bottom_arm_gap])
+    cube([motor_depth + nub_depth, wall_size, bottom_arm_height]);
 
 // bottom left nub
-if (fab_mini_v15 == "true") {
-    translate([0, 0, 8])
-        cube([1, 3, 2]);
-} else {
-    translate([0, 0, 8])
-        cube([1, 3, height - 8]);
-}
+translate([0, 0, bottom_arm_gap])
+    cube([nub_depth, wall_size + nub_size, bottom_arm_height]);
 
-if (height > 20) {
+if (height > fabrikator_mini_v15_height) {
     // top left arm
-    translate([0, 0, 20])
-        cube([30, 2, height - 20]);
+    translate([0, 0, fabrikator_mini_v15_height])
+        cube([motor_depth + nub_depth, wall_size, height - fabrikator_mini_v15_height]);
     
     // top left nub
-    translate([0, 0, 20])
-        cube([1, 3, height - 20]);
+    translate([0, 0, fabrikator_mini_v15_height])
+        cube([nub_depth, wall_size + nub_size, height - fabrikator_mini_v15_height]);
 }
 
 // left back support
-translate([26, 0, 0])
-    cube([4, 2, height]);
+translate([motor_depth + nub_depth - back_support_depth, 0, 0])
+    cube([back_support_depth, wall_size, height]);
 
 // mid left support
-translate([15, 0, 10])
-    cube([11, 2, height - 10]);
+translate([nub_depth + mid_left_cutout, 0, 10])
+    cube([motor_depth - back_support_depth - mid_left_cutout, wall_size, height - fabrikator_mini_v15_height + mid_left_cutout_height]);
 
 // right arm
 difference() {
-    translate([0, 30.5, 0])
-        cube([30, 2, height]);
+    translate([0, motor_width + wall_size, 0])
+        cube([motor_depth + nub_depth, wall_size, height]);
     
-    translate([22, 28, 4])
+    translate([24 - wall_size, 28, 4])
         rotate([0, 0, 90])
         ellipse(7, 20, 8);
     
     if (height > 23) {
-        translate([22, 28, 15])
+        translate([24 - wall_size, 28, 15])
             rotate([0, 0, 90])
             ellipse(7, 20, 8);
     }
 }
     
 // right nub
-translate([0, 29.5, 0])
-    cube([1, 3, height]);
+translate([0, motor_width + wall_size - nub_size, 0])
+    cube([nub_depth, wall_size + nub_size, height]);
 
 // back wall
 difference() {
-    translate([28, 0, 0])
-        cube([2, 32, height]);
+    translate([motor_depth + nub_depth, 0, 0])
+        cube([wall_size, motor_width + (2 * wall_size), height]);
     
-    translate([25, 10, 4])
+    translate([25, 8 + wall_size, 4])
         ellipse(7, 20, 8);
     
     if (height > 23) {
-        translate([25, 10, 15])
+        translate([25, 8 + wall_size, 15])
             ellipse(7, 20, 8);
     }
 }
 
+// bottom part
 difference() {
     // base
-    translate([0, 0, -5])
-        cube([30, 32.5, 5]);
+    translate([0, 0, -base_height])
+        cube([motor_depth + nub_depth + wall_size, motor_width + (2 * wall_size), base_height]);
     
     // cut off angled bottom part
     rotate([0, -fan_angle, 0])
-        translate([-2, -1, -11])
-        cube([34, 34, 6]);
+        translate([-base_height, -(base_height / 2), -(3 * base_height)])
+        cube([motor_depth * 1.5, motor_width + (2 * wall_size) + base_height, (2 * base_height)]);
     
     // main fan hole
     if (fan_hole_angled == "true") {
         rotate([0, -fan_angle, 0])
-            translate([14.5, 16, -7])
-            cylinder(d = fan_hole_diameter, h = 10);
+            translate([nub_depth + (motor_depth / 2), wall_size + (motor_width / 2), -(base_height * 1.5)])
+            cylinder(d = fan_hole_diameter, h = (2 * base_height));
     } else {
-        translate([14.5, 16, -7])
-        cylinder(d = fan_hole_diameter, h = 10);
+        translate([nub_depth + (motor_depth / 2), wall_size + (motor_width / 2), -(base_height * 1.5)])
+        cylinder(d = fan_hole_diameter, h = (2 * base_height));
     }
     
     // fan screw holes
     for (i = [1 : 2]) {
         for (j = [1 : 2]) {
             rotate([0, -fan_angle, 0])
-                translate([14.5, 16, -7])
+                translate([nub_depth + (motor_depth / 2), wall_size + (motor_width / 2), -(base_height * 1.5)])
                 translate([(((i % 2) == 0) ? fan_screw_pos : fan_screw_neg),
                     (((j % 2) == 0) ? fan_screw_pos : fan_screw_neg), 0])
-                cylinder(d = fan_screw_diameter, h = 10);
+                cylinder(d = fan_screw_diameter, h = (2 * base_height));
         }
     }
     
     // big air hole
-    translate([8, 33, -1.8])
+    translate([8, 36, -1.8])
         rotate([90, 0, 0])
-        cylinder(d = 2, h = 34);
+        cylinder(d = 2, h = 40);
     
     // small air hole
-    translate([12, 33, -1.5])
+    translate([12, 36, -1.5])
         rotate([90, 0, 0])
-        cylinder(d = 1.5, h = 34);
+        cylinder(d = 1.5, h = 40);
     
     // elliptical air hole
-    translate([-1, 11, -3.5])
+    translate([-1, 9 + wall_size, -3.5])
         ellipse(2, 12, 8);
 }