Moved slicing profiles into folder

Cura_CTC_i3_Pro_B.ini

@@ -1,262 +0,0 @@
-[profile]
-layer_height = 0.2
-wall_thickness = 0.8
-retraction_enable = True
-solid_layer_thickness = 0.8
-fill_density = 40
-print_speed = 60
-print_temperature = 195
-print_temperature2 = 0
-print_temperature3 = 0
-print_temperature4 = 0
-print_temperature5 = 0
-print_bed_temperature = 60
-support = Everywhere
-platform_adhesion = None
-support_dual_extrusion = Both
-wipe_tower = False
-wipe_tower_volume = 15
-ooze_shield = False
-filament_diameter = 1.75
-filament_diameter2 = 0
-filament_diameter3 = 0
-filament_diameter4 = 0
-filament_diameter5 = 0
-filament_flow = 100.0
-nozzle_size = 0.4
-retraction_speed = 40.0
-retraction_amount = 1.2
-retraction_dual_amount = 16.5
-retraction_min_travel = 1.5
-retraction_combing = All
-retraction_minimal_extrusion = 0.02
-retraction_hop = 0.08
-bottom_thickness = 0.3
-layer0_width_factor = 110
-object_sink = 0.0
-overlap_dual = 0.15
-travel_speed = 150
-bottom_layer_speed = 50.0
-infill_speed = 0.0
-solidarea_speed = 0.0
-inset0_speed = 0.0
-insetx_speed = 0.0
-cool_min_layer_time = 10
-fan_enabled = True
-skirt_line_count = 3
-skirt_gap = 3.0
-skirt_minimal_length = 150.0
-fan_full_height = 1.5
-fan_speed = 30
-fan_speed_max = 100
-cool_min_feedrate = 10
-cool_head_lift = False
-solid_top = True
-solid_bottom = True
-fill_overlap = 15
-perimeter_before_infill = False
-support_type = Lines
-support_angle = 60
-support_fill_rate = 15
-support_xy_distance = 0.7
-support_z_distance = 0.15
-spiralize = False
-simple_mode = False
-brim_line_count = 20
-raft_margin = 5.0
-raft_line_spacing = 3.0
-raft_base_thickness = 0.3
-raft_base_linewidth = 1.0
-raft_interface_thickness = 0.27
-raft_interface_linewidth = 0.4
-raft_airgap_all = 0.0
-raft_airgap = 0.22
-raft_surface_layers = 2
-raft_surface_thickness = 0.27
-raft_surface_linewidth = 0.4
-fix_horrible_union_all_type_a = True
-fix_horrible_union_all_type_b = False
-fix_horrible_use_open_bits = False
-fix_horrible_extensive_stitching = False
-plugin_config = 
-object_center_x = -1
-object_center_y = -1
-
-[alterations]
-start.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	M140 S{print_bed_temperature} ;Heat Print bed and don't wait
-	M104 S{print_temperature}     ;Heat extruder and don't wait
-	G21        ;metric values
-	G90        ;absolute positioning
-	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	M190 S{print_bed_temperature} ;Heat Print bed and wait
-	M109 S{print_temperature}     ;Heat extruder and wait
-	G1 Z5.0 F{travel_speed}        ;move the platform down 5mm
-	G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
-	G1 Z0.15 F{travel_speed}        ;move Z to first layer height
-	G92 E0                   ;zero the extruded length
-	G1 X30.0 E3 F300         ;extrude 3mm of feed stock and move X 20mm
-	G92 E0                   ;zero the extruded length again
-	G1 Z10.0 F{travel_speed} ;move platform down 5mm more
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end.gcode = M104 S0
-	M140 S0                        ;heated bed heater off (if you have it)
-	G91                            ;relative positioning
-	G1 E-1 F40                     ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
-	G90                            ;absolute positioning
-	G1 X0 Y180 F{travel_speed}     ;move X to min endstops, y to max so the head is out of the way
-	M84                            ;steppers off
-	M117 Finished!
-start2.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end2.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start3.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T2                      ;Switch to the 3rd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end3.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-start4.gcode = ;Sliced at: {day} {date} {time}
-	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
-	;Print time: {print_time}
-	;Filament used: {filament_amount}m {filament_weight}g
-	;Filament cost: {filament_cost}
-	;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
-	;M104 S{print_temperature} ;Uncomment to add your own temperature line
-	;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
-	;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
-	G21        ;metric values
-	G90        ;absolute positioning
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	T3                      ;Switch to the 4th extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T2                      ;Switch to the 3rd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T1                      ;Switch to the 2nd extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F200 E-{retraction_dual_amount}
-	T0                      ;Switch to the first extruder
-	G92 E0                  ;zero the extruded length
-	G1 F200 E10             ;extrude 10mm of feed stock
-	G92 E0                  ;zero the extruded length again
-	G1 F{travel_speed}
-	;Put printing message on LCD screen
-	M117 Printing...
-end4.gcode = ;End GCode
-	M104 T0 S0                     ;extruder heater off
-	M104 T1 S0                     ;extruder heater off
-	M104 T2 S0                     ;extruder heater off
-	M104 T3 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                                    ;relative positioning
-	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
-	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
-	;{profile_string}
-support_start.gcode = 
-support_end.gcode = 
-cool_start.gcode = 
-cool_end.gcode = 
-replace.csv = 
-preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added before the T(n)
-postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
-	;This code is added after the T(n)
-

SlicingProfiles/OctoPrint/cura_ctc_i3_pro_b.profile

@@ -0,0 +1,419 @@
+_description: Imported from Cura_CTC_i3_Pro_B.ini on 2018-01-06 17:07
+_display_name: Cura_CTC_i3_Pro_B
+bottom_layer_speed: 50.0
+bottom_thickness: 0.3
+brim_line_count: 20
+cool_head_lift: false
+cool_min_feedrate: 10
+cool_min_layer_time: 10
+end_gcode:
+- 'M104 S0
+
+  M140 S0                        ;heated bed heater off (if you have it)
+
+  G91                            ;relative positioning
+
+  G1 E-0.5 F40                     ;retract the filament a bit before lifting the nozzle,
+  to release some of the pressure
+
+  G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
+
+  G90                            ;absolute positioning
+
+  G1 X0 Y180 F{travel_speed}     ;move X to min endstops, y to max so the head is
+  out of the way
+
+  M84                            ;steppers off
+
+  M117 Finished!'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M104 T2 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M104 T2 S0                     ;extruder heater off
+
+  M104 T3 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+fan_enabled: true
+fan_full_height: 1.5
+fan_speed: 30
+fan_speed_max: 100
+filament_diameter:
+- 1.75
+- false
+- false
+- false
+filament_flow: 100.0
+fill_density: 40
+fill_overlap: 15
+first_layer_width_factor: 110
+fix_horrible_extensive_stitching: false
+fix_horrible_union_all_type_a: true
+fix_horrible_union_all_type_b: false
+fix_horrible_use_open_bits: false
+follow_surface: false
+infill_speed: 0.0
+inner_shell_speed: 0.0
+layer_height: 0.2
+object_sink: 0.0
+ooze_shield: false
+outer_shell_speed: 0.0
+overlap_dual: 0.15
+perimeter_before_infill: false
+platform_adhesion: none
+print_bed_temperature: 60
+print_speed: 60
+print_temperature:
+- 195
+- false
+- false
+- false
+raft_airgap: 0.22
+raft_airgap_all: 0.0
+raft_base_linewidth: 1.0
+raft_base_thickness: 0.3
+raft_interface_linewidth: 0.4
+raft_interface_thickness: 0.27
+raft_line_spacing: 3.0
+raft_margin: 5.0
+raft_surface_layers: 2
+raft_surface_linewidth: 0.4
+raft_surface_thickness: 0.27
+retraction_amount: 1.0
+retraction_combing: all
+retraction_dual_amount: 16.5
+retraction_enable: true
+retraction_hop: 0.18
+retraction_min_travel: 1.5
+retraction_minimal_extrusion: 0.02
+retraction_speed: 40.0
+skirt_gap: 3.0
+skirt_line_count: 3
+skirt_minimal_length: 150.0
+solid_bottom: true
+solid_layer_thickness: 0.8
+solid_top: true
+solidarea_speed: 0.0
+spiralize: false
+start_gcode:
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  M140 S{print_bed_temperature} ;Heat Print bed and don''t wait
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M82        ;set extruder to absolute mode
+
+  M107       ;start with the fan off
+
+  G28        ;move X/Y/Z to min endstops
+
+  G29        ;perform auto bed leveling
+
+  M104 S{print_temperature}     ;Heat extruder and don''t wait
+
+  M190 S{print_bed_temperature} ;Heat Print bed and wait
+
+  M109 S{print_temperature}     ;Heat extruder and wait
+
+  G1 Z5.0 F{travel_speed}        ;move the platform down 5mm
+
+  G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
+
+  G1 Z0.15 F{travel_speed}        ;move Z to first layer height
+
+  G92 E0                   ;zero the extruded length
+
+  G1 X30.0 E3 F300         ;extrude 3mm of feed stock and move X 20mm
+
+  G92 E0                   ;zero the extruded length again
+
+  G1 Z10.0 F{travel_speed} ;move platform down 5mm more
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T2                      ;Switch to the 3rd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T3                      ;Switch to the 4th extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T2                      ;Switch to the 3rd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+support: none
+support_angle: 60
+support_dual_extrusion: both
+support_fill_rate: 15
+support_type: lines
+support_xy_distance: 0.7
+support_z_distance: 0.15
+travel_speed: 100
+wall_thickness: 0.8
+wipe_tower: false
+wipe_tower_volume: 15

SlicingProfiles/OctoPrint/i3_flex.profile

@@ -0,0 +1,421 @@
+_description: Imported from Cura_CTC_i3_Pro_B.ini on 2018-01-06 17:07
+_display_name: CTC i3 Flex
+bottom_layer_speed: 15.0
+bottom_thickness: 0.2
+brim_line_count: 20
+cool_head_lift: false
+cool_min_feedrate: 10
+cool_min_layer_time: 10
+end_gcode:
+- 'M104 S0
+
+  M140 S0                        ;heated bed heater off (if you have it)
+
+  G91                            ;relative positioning
+
+  G1 E-0.5 F40                     ;retract the filament a bit before lifting the nozzle,
+  to release some of the pressure
+
+  G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
+
+  G90                            ;absolute positioning
+
+  G1 X0 Y180 F{travel_speed}     ;move X to min endstops, y to max so the head is
+  out of the way
+
+  M84                            ;steppers off
+
+  M117 Finished!'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M104 T2 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+- ';End GCode
+
+  M104 T0 S0                     ;extruder heater off
+
+  M104 T1 S0                     ;extruder heater off
+
+  M104 T2 S0                     ;extruder heater off
+
+  M104 T3 S0                     ;extruder heater off
+
+  M140 S0                     ;heated bed heater off (if you have it)
+
+  G91                                    ;relative positioning
+
+  G1 E-0.5 F300                            ;retract the filament a bit before lifting
+  the nozzle, to release some of the pressure
+
+  G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
+  more
+
+  G28 X0 Y0                              ;move X/Y to min endstops, so the head is
+  out of the way
+
+  M84                         ;steppers off
+
+  G90                         ;absolute positioning
+
+  ;{profile_string}'
+fan_enabled: true
+fan_full_height: 1.5
+fan_speed: 30
+fan_speed_max: 100
+filament_diameter:
+- 1.75
+- false
+- false
+- false
+filament_flow: 100.0
+fill_density: 15
+fill_overlap: 15
+first_layer_width_factor: 110
+fix_horrible_extensive_stitching: false
+fix_horrible_union_all_type_a: true
+fix_horrible_union_all_type_b: false
+fix_horrible_use_open_bits: false
+follow_surface: false
+infill_speed: 0.0
+inner_shell_speed: 0.0
+layer_height: 0.2
+object_sink: 0.0
+ooze_shield: false
+outer_shell_speed: 40.0
+overlap_dual: 0.15
+perimeter_before_infill: false
+platform_adhesion: none
+print_bed_temperature: 30
+print_speed: 50
+print_temperature:
+- 195
+- false
+- false
+- false
+raft_airgap: 0.22
+raft_airgap_all: 0.0
+raft_base_linewidth: 1.0
+raft_base_thickness: 0.3
+raft_interface_linewidth: 0.4
+raft_interface_thickness: 0.27
+raft_line_spacing: 3.0
+raft_margin: 5.0
+raft_surface_layers: 2
+raft_surface_linewidth: 0.4
+raft_surface_thickness: 0.27
+retraction_amount: 1.0
+retraction_combing: all
+retraction_dual_amount: 16.5
+retraction_enable: true
+retraction_hop: 0.18
+retraction_min_travel: 1.5
+retraction_minimal_extrusion: 0.02
+retraction_speed: 40.0
+skirt_gap: 3.0
+skirt_line_count: 3
+skirt_minimal_length: 150.0
+solid_bottom: true
+solid_layer_thickness: 1.0
+solid_top: true
+solidarea_speed: 0.0
+spiralize: false
+start_gcode:
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M82        ;set extruder to absolute mode
+
+  M107       ;start with the fan off
+
+  G28        ;move X/Y/Z to min endstops
+
+  G29        ;perform auto bed leveling
+
+  G1 X0.0 Y0.0 F{travel_speed}
+
+  M140 S{print_bed_temperature} ;Heat Print bed and don''t wait
+
+  M104 S{print_temperature}     ;Heat extruder and don''t wait
+
+  M190 S{print_bed_temperature} ;Heat Print bed and wait
+
+  M109 S{print_temperature}     ;Heat extruder and wait
+
+  G1 Z5.0 F{travel_speed}        ;move the platform down 5mm
+
+  G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
+
+  G1 Z0.15 F{travel_speed}        ;move Z to first layer height
+
+  G92 E0                   ;zero the extruded length
+
+  G1 X30.0 E3 F300         ;extrude 3mm of feed stock and move X 20mm
+
+  G92 E0                   ;zero the extruded length again
+
+  G1 Z10.0 F{travel_speed} ;move platform down 5mm more
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T2                      ;Switch to the 3rd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+- ';Sliced at: {day} {date} {time}
+
+  ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+
+  ;Print time: {print_time}
+
+  ;Filament used: {filament_amount}m {filament_weight}g
+
+  ;Filament cost: {filament_cost}
+
+  ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+
+  ;M104 S{print_temperature} ;Uncomment to add your own temperature line
+
+  ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
+
+  ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
+
+  G21        ;metric values
+
+  G90        ;absolute positioning
+
+  M107       ;start with the fan off
+
+  G28 X0 Y0  ;move X/Y to min endstops
+
+  G28 Z0     ;move Z to min endstops
+
+  G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+
+  T3                      ;Switch to the 4th extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T2                      ;Switch to the 3rd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T1                      ;Switch to the 2nd extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F200 E-{retraction_dual_amount}
+
+  T0                      ;Switch to the first extruder
+
+  G92 E0                  ;zero the extruded length
+
+  G1 F200 E10             ;extrude 10mm of feed stock
+
+  G92 E0                  ;zero the extruded length again
+
+  G1 F{travel_speed}
+
+  ;Put printing message on LCD screen
+
+  M117 Printing...'
+support: none
+support_angle: 60
+support_dual_extrusion: both
+support_fill_rate: 15
+support_type: lines
+support_xy_distance: 0.7
+support_z_distance: 0.15
+travel_speed: 100
+wall_thickness: 1.0
+wipe_tower: false
+wipe_tower_volume: 15