Tweaked i3 config

Cura_CTC_i3_Pro_B.ini

 print_temperature4 = 0
 print_temperature5 = 0
 print_bed_temperature = 60
-support = None
+support = Everywhere
 platform_adhesion = None
 support_dual_extrusion = Both
 wipe_tower = False
 filament_diameter5 = 0
 filament_flow = 100.0
 nozzle_size = 0.4
-retraction_speed = 25.0
-retraction_amount = 1.0
+retraction_speed = 40.0
+retraction_amount = 1.2
 retraction_dual_amount = 16.5
 retraction_min_travel = 1.5
 retraction_combing = All
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 150
-bottom_layer_speed = 20.0
+bottom_layer_speed = 40.0
 infill_speed = 0.0
-solidarea_speed = 30.0
-inset0_speed = 45.0
+solidarea_speed = 0.0
+inset0_speed = 0.0
 insetx_speed = 0.0
-cool_min_layer_time = 15
+cool_min_layer_time = 20
 fan_enabled = True
 skirt_line_count = 3
 skirt_gap = 3.0
 skirt_minimal_length = 150.0
-fan_full_height = 0.5
-fan_speed = 100
+fan_full_height = 1.5
+fan_speed = 80
 fan_speed_max = 100
 cool_min_feedrate = 10
 cool_head_lift = False
 	;Filament used: {filament_amount}m {filament_weight}g
 	;Filament cost: {filament_cost}
 	M140 S{print_bed_temperature} ;Heat Print bed and don't wait
-	M104 S{print_temperature} ;Heat extruder and don't wait
+	M104 S{print_temperature}     ;Heat extruder and don't wait
 	G21        ;metric values
 	G90        ;absolute positioning
 	M82        ;set extruder to absolute mode
 	M107       ;start with the fan off
 	G28 X0 Y0  ;move X/Y to min endstops
 	G28 Z0     ;move Z to min endstops
-	M190 S{print_bed_temperature} ;Heat Print bed and don't wait
-	M109 S{print_temperature} ;Heat extruder and don't wait
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
-	G92 E0                  ;zero the extruded length
-	G1 F200 E3              ;extrude 3mm of feed stock
-	G92 E0                  ;zero the extruded length again
+	M190 S{print_bed_temperature} ;Heat Print bed and wait
+	M109 S{print_temperature}     ;Heat extruder and wait
+	G1 Z5.0 F{travel_speed}        ;move the platform down 5mm
+	G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
+	G1 Z0.3 F{travel_speed}        ;move Z to first layer height
+	G92 E0                   ;zero the extruded length
+	G1 X30.0 E3 F400         ;extrude 3mm of feed stock and move X 20mm
+	G92 E0                   ;zero the extruded length again
+	G1 Z10.0 F{travel_speed} ;move platform down 5mm more
 	G1 F{travel_speed}
 	;Put printing message on LCD screen
 	M117 Printing...
-end.gcode = M104 S0                     ;extruder heater off
-	M140 S0                     ;heated bed heater off (if you have it)
-	G91                         ;relative positioning
-	G1 E-1 F300                 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-1 F{travel_speed};move Z up a bit and retract filament even more
-	G1 X0 Y200 F400             ;move X to min endstops, y to centerso the head is out of the way
-	M84                         ;steppers off
-	G90                         ;absolute positioning
+end.gcode = M104 S0
+	M140 S0                        ;heated bed heater off (if you have it)
+	G91                            ;relative positioning
+	G1 E-1 F40                     ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+	G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
+	G90                            ;absolute positioning
+	G1 X0 Y180 F{travel_speed}     ;move X to min endstops, y to max so the head is out of the way
+	M84                            ;steppers off
 	M117 Finished!
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}