add stuff

fahrradtasche.scad

@@ -0,0 +1,54 @@
+height = 67.5;
+width = 50.0;
+depth = 15.0;
+large_hole = 31.0;
+small_hole = 6.4;
+large_hole_off = 6.5;
+small_hole_off = 15.0;
+small_hole_depth = 39.0;
+screw_large = 4.2;
+screw_small = 3.5;
+screw_head = 8.5;
+screw_head_depth = 4.5;
+screw_large_depth = 23.0;
+screw_small_depth = 40.0;
+screw_off = 5.0;
+gap = 2.0;
+
+$fn = 25;
+
+difference() {
+    cube([width, height, depth]);
+    
+    translate([width / 2, height - (large_hole / 2) - large_hole_off, -1])
+    cylinder(d = large_hole, h = depth + 2);
+    
+    translate([-1, height - (large_hole / 2) - large_hole_off - (gap / 2), -1])
+    cube([width + 2, gap, depth + 2]);
+    
+    translate([-1, (small_hole / 2) + small_hole_off, depth / 2])
+    rotate([0, 90, 0])
+    cylinder(d = small_hole, h = small_hole_depth + 1);
+    
+    translate([10, (small_hole / 2) + small_hole_off, depth / 2])
+    rotate([90, 0, 0])
+    cylinder(d = screw_small, h = small_hole_depth + 1);
+    
+    translate([30, (small_hole / 2) + small_hole_off, depth / 2])
+    rotate([90, 0, 0])
+    cylinder(d = screw_small, h = small_hole_depth + 1);
+    
+    translate([screw_off, height + 1, depth / 2])
+    rotate([90, 0, 0]) {
+        cylinder(d = screw_head, h = screw_head_depth + 1);
+        cylinder(d = screw_large, h = screw_large_depth);
+        cylinder(d = screw_small, h = screw_small_depth);
+    }
+    
+    translate([width - screw_off, height + 1, depth / 2])
+    rotate([90, 0, 0]) {
+        cylinder(d = screw_head, h = screw_head_depth + 1);
+        cylinder(d = screw_large, h = screw_large_depth);
+        cylinder(d = screw_small, h = screw_small_depth);
+    }
+}

ikea-regal-conn.scad

@@ -0,0 +1,31 @@
+pipe_dia = 23.0;
+pipe_dist = 25.0;
+hole_dia = 3.5;
+wall = 5.0;
+height = 10.0;
+cut = 2.0;
+
+$fn = 25;
+
+difference() {
+    translate([-(pipe_dia / 2) - (2 * wall) - hole_dia, -(pipe_dia / 2) - wall, 0])
+        cube([pipe_dist + (2 * pipe_dia) + (4 * wall) + (2 * hole_dia), pipe_dia + (2 * wall), height]);
+    
+    translate([-(pipe_dia / 2) - (2 * wall) - hole_dia - 1, -cut / 2, -1])
+        cube([pipe_dist + (2 * pipe_dia) + (4 * wall) + (2 * hole_dia) + 2, cut, height + 2]);
+
+    translate([0, 0, -1])
+        cylinder(d = pipe_dia, h = height + 2);
+    translate([pipe_dist + pipe_dia, 0, -1])
+        cylinder(d = pipe_dia, h = height + 2);
+    
+    rotate([90, 0, 0])
+        translate([-pipe_dia / 2 - wall, height / 2, -pipe_dia / 2 - wall - 1])
+        cylinder(d = hole_dia, h = pipe_dia + (2 * wall) + 2);
+    rotate([90, 0, 0])
+        translate([pipe_dist + (pipe_dia * 3 / 2) + wall, height / 2, -pipe_dia / 2 - wall - 1])
+        cylinder(d = hole_dia, h = pipe_dia + (2 * wall) + 2);
+    rotate([90, 0, 0])
+        translate([(pipe_dist + pipe_dia) / 2, height / 2, -pipe_dia / 2 - wall - 1])
+        cylinder(d = hole_dia, h = pipe_dia + (2 * wall) + 2);
+}