New/Modified Cura settings files

Cura_Beta_Fabrikator_Mini.json

@@ -0,0 +1,62 @@
+{
+    "id": "fabrikator-mini-bed",
+    "name": "Fabrikator Mini",
+    "version": 1,
+    "inherits": "fdmprinter.json",
+    "machine_settings": {
+        "machine_width": {
+            "default": 80
+        },
+        "machine_height": {
+            "default": 80
+        },
+        "machine_depth": {
+            "default": 80
+        },
+        "machine_center_is_zero": {
+            "default": false
+        },
+        "machine_nozzle_size": {
+            "default": 0.4
+        },
+        "machine_head_shape_min_x": {
+            "default": 75
+        },
+        "machine_head_shape_min_y": {
+            "default": 18
+        },
+        "machine_head_shape_max_x": {
+            "default": 18
+        },
+        "machine_head_shape_max_y": {
+            "default": 35
+        },
+        "machine_nozzle_gantry_distance": {
+            "default": 55
+        },
+        "machine_nozzle_offset_x_1": {
+            "default": 18
+        },
+        "machine_nozzle_offset_y_1": {
+            "default": 0
+        },
+        "machine_gcode_flavor": {
+            "default": "RepRap"
+        },
+        "machine_start_gcode": {
+            "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM104 S{print_temperature} ; begin heating nozzle\nG28 X0 Y0 ;move X/Y to min endstops\nM140 S{print_bed_temperature} ; begin heating bed\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E1 ;extrude 1mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
+        },
+        "machine_end_gcode": {
+            "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
+        }
+    },
+    "categories": {
+        "material": {
+            "settings": {
+                "material_bed_temperature": {
+                    "visible": true
+                }
+            }
+        }
+    }
+}

Cura_Fabrikator_Mini.ini

@@ -10,7 +10,7 @@ print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
 print_temperature5 = 0
-print_bed_temperature = 60
+print_bed_temperature = 70
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
@@ -32,7 +32,7 @@ retraction_combing = All
 retraction_minimal_extrusion = 0.02
 retraction_hop = 0.0
 bottom_thickness = 0.3
-layer0_width_factor = 100
+layer0_width_factor = 110
 object_sink = 0.0
 overlap_dual = 0.15
 travel_speed = 30.0
@@ -43,8 +43,8 @@ inset0_speed = 20
 insetx_speed = 20
 cool_min_layer_time = 15
 fan_enabled = True
-skirt_line_count = 1
-skirt_gap = 0.5
+skirt_line_count = 3
+skirt_gap = 0.3
 skirt_minimal_length = 300.0
 fan_full_height = 0.5
 fan_speed = 100
@@ -57,7 +57,7 @@ fill_overlap = 15
 perimeter_before_infill = False
 support_type = Lines
 support_angle = 60
-support_fill_rate = 25
+support_fill_rate = 15
 support_xy_distance = 0.7
 support_z_distance = 0.15
 spiralize = False
@@ -93,17 +93,17 @@ start.gcode = ;Sliced at: {day} {date} {time}
 	G21        ;metric values
 	G90        ;absolute positioning
 	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	M140 S{print_bed_temperature} ; begin heating bed
-	M104 S{print_temperature} ; begin heating nozzle
+	M107       ;start with the fan off
+	M104 S{print_temperature} ; begin heating nozzle
 	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z10.0 F{travel_speed} ;move the platform down 15mm
-	M190 S{print_bed_temperature} ; Wait for bed temp
-	M109 S{print_temperature} ; Wait for nozzle temp
+	M140 S{print_bed_temperature} ; begin heating bed
+	G28 Z0     ;move Z to min endstops
+	G1 Z10.0 F{travel_speed} ;move the platform down 10mm
+	M190 S{print_bed_temperature} ; Wait for bed temp
+	M109 S{print_temperature} ; Wait for nozzle temp
 	G92 E0                  ;zero the extruded length
-	G1 F200 E1              ;extrude 1mm of feed stock
-	G92 E0                  ;zero the extruded length again
+	;G1 F200 E1              ;extrude 1mm of feed stock
+	;G92 E0                  ;zero the extruded length again
 	G1 F{travel_speed}
 	;Put printing message on LCD screen
 	M117 Printing...
@@ -112,7 +112,8 @@ end.gcode = ;End GCode
 	M140 S0                     ;heated bed heater off (if you have it)
 	G91                                    ;relative positioning
 	G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
-	G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	;G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+	G1 Z+0.5 E-4 F{travel_speed} ;move Z up a bit and retract filament even more
 	G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way
 	M84                         ;steppers off
 	G90                         ;absolute positioning