Removed unmaintained Slic3r config, updated Cura config for Heated Print Bed.

Cura_Fabrikator_Mini.ini

@@ -2,15 +2,15 @@
 layer_height = 0.2
 wall_thickness = 0.8
 retraction_enable = True
-solid_layer_thickness = 0.6
-fill_density = 20
+solid_layer_thickness = 0.8
+fill_density = 15
 print_speed = 20
 print_temperature = 190
 print_temperature2 = 0
 print_temperature3 = 0
 print_temperature4 = 0
 print_temperature5 = 0
-print_bed_temperature = 70
+print_bed_temperature = 60
 support = None
 platform_adhesion = None
 support_dual_extrusion = Both
@@ -35,17 +35,17 @@ bottom_thickness = 0.3
 layer0_width_factor = 100
 object_sink = 0.0
 overlap_dual = 0.15
-travel_speed = 20.0
+travel_speed = 30.0
 bottom_layer_speed = 18
 infill_speed = 20
 solidarea_speed = 20
 inset0_speed = 20
 insetx_speed = 20
-cool_min_layer_time = 5
+cool_min_layer_time = 15
 fan_enabled = True
 skirt_line_count = 1
-skirt_gap = 3.0
-skirt_minimal_length = 150.0
+skirt_gap = 0.5
+skirt_minimal_length = 300.0
 fan_full_height = 0.5
 fan_speed = 100
 fan_speed_max = 100
@@ -57,13 +57,13 @@ fill_overlap = 15
 perimeter_before_infill = False
 support_type = Lines
 support_angle = 60
-support_fill_rate = 15
+support_fill_rate = 25
 support_xy_distance = 0.7
 support_z_distance = 0.15
 spiralize = False
 simple_mode = False
-brim_line_count = 20
-raft_margin = 5.0
+brim_line_count = 5
+raft_margin = 3.0
 raft_line_spacing = 3.0
 raft_base_thickness = 0.3
 raft_base_linewidth = 1.0
@@ -93,12 +93,16 @@ start.gcode = ;Sliced at: {day} {date} {time}
 	G21        ;metric values
 	G90        ;absolute positioning
 	M82        ;set extruder to absolute mode
-	M107       ;start with the fan off
-	G28 X0 Y0  ;move X/Y to min endstops
-	G28 Z0     ;move Z to min endstops
-	G1 Z15.0 F{travel_speed} ;move the platform down 15mm
+	M107       ;start with the fan off
+	M140 S{print_bed_temperature} ; begin heating bed
+	M104 S{print_temperature} ; begin heating nozzle
+	G28 X0 Y0  ;move X/Y to min endstops
+	G28 Z0     ;move Z to min endstops
+	G1 Z10.0 F{travel_speed} ;move the platform down 15mm
+	M190 S{print_bed_temperature} ; Wait for bed temp
+	M109 S{print_temperature} ; Wait for nozzle temp
 	G92 E0                  ;zero the extruded length
-	G1 F200 E3              ;extrude 3mm of feed stock
+	G1 F200 E1              ;extrude 1mm of feed stock
 	G92 E0                  ;zero the extruded length again
 	G1 F{travel_speed}
 	;Put printing message on LCD screen

Slic3r_config_bundle.ini

@@ -1,313 +0,0 @@
-# generated by Slic3r 1.2.9 on Tue Mar 29 17:16:41 2016
-
-[filament:Fabrikator Mini PLA]
-bed_temperature = 0
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #929292
-filament_diameter = 1.75
-first_layer_bed_temperature = 0
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-temperature = 190
-
-[filament:Simple Mode]
-bed_temperature = 0
-extrusion_multiplier = 1
-filament_diameter = 1.75
-first_layer_bed_temperature = 0
-first_layer_temperature = 195
-temperature = 190
-
-[presets]
-filament = Fabrikator Mini PLA.ini
-print = Fabrikator Mini.ini
-printer = Fabrikator Mini.ini
-
-[print:Fabrikator Mini]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 20
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 80%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 20%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 120%
-first_layer_height = 0.3
-first_layer_speed = 10
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 30%
-infill_speed = 15
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 20
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 15
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 20
-support_material_threshold = 0
-thin_walls = 1
-threads = 4
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 15
-top_solid_layers = 3
-travel_speed = 20
-xy_size_compensation = 0
-
-[print:Simple Mode]
-bottom_solid_layers = 3
-brim_width = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-fill_density = 20%
-fill_pattern = honeycomb
-infill_speed = 15
-layer_height = 0.2
-perimeter_speed = 15
-perimeters = 3
-raft_layers = 0
-support_material = 0
-support_material_contact_distance = 0.2
-support_material_spacing = 2.5
-top_solid_layers = 3
-travel_speed = 15
-xy_size_compensation = 0
-
-[printer:Fabrikator Mini]
-bed_shape = 0x0,80x0,80x80,0x80
-before_layer_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0
-retract_before_travel = 1.5
-retract_layer_change = 0
-retract_length = 4.5
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
-
-[printer:Simple Mode]
-bed_shape = 0x0,80x0,80x80,0x80
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-gcode_flavor = reprap
-nozzle_diameter = 0.4
-retract_length = 2
-retract_lift = 0
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-wipe = 0
-z_offset = 0
-
-[settings]
-autocenter = 1
-mode = expert
-
-[simple]
-avoid_crossing_perimeters = 1
-bed_shape = 0x0,80x0,80x80,0x80
-bed_temperature = 0
-before_layer_gcode = 
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 0
-cooling = 1
-default_acceleration = 0
-disable_fan_first_layers = 3
-dont_support_bridges = 1
-duplicate_distance = 6
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 1.75
-fill_angle = 45
-fill_density = 20%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_bed_temperature = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 30
-first_layer_temperature = 195
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = reprap
-infill_acceleration = 0
-infill_every_layers = 10
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 15
-interface_shells = 0
-layer_gcode = 
-layer_height = 0.2
-max_fan_speed = 100
-max_print_speed = 80
-max_volumetric_speed = 0
-min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
-notes = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 15
-perimeters = 3
-post_process = 
-pressure_advance = 0
-raft_layers = 0
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-seam_position = aligned
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slowdown_below_layer_time = 5
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 0
-temperature = 190
-thin_walls = 1
-threads = 2
-toolchange_gcode = 
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 15
-top_solid_layers = 3
-travel_speed = 15
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 0
-xy_size_compensation = 0
-z_offset = 0