Explorar el Código

Added slic3r config for CTC i3 Pro B

Thomas Buck hace 6 años
padre
commit
ff2f7b8e44
Se han modificado 3 ficheros con 240 adiciones y 62 borrados
  1. 0
    62
      Cura_Beta_Fabrikator_Mini.json
  2. 120
    0
      slic3r-ctc-i3-flexismart.ini
  3. 120
    0
      slic3r-ctc-i3-pla.ini

+ 0
- 62
Cura_Beta_Fabrikator_Mini.json Ver fichero

@@ -1,62 +0,0 @@
1
-{
2
-    "id": "fabrikator-mini-bed",
3
-    "name": "Fabrikator Mini",
4
-    "version": 1,
5
-    "inherits": "fdmprinter.json",
6
-    "machine_settings": {
7
-        "machine_width": {
8
-            "default": 80
9
-        },
10
-        "machine_height": {
11
-            "default": 80
12
-        },
13
-        "machine_depth": {
14
-            "default": 80
15
-        },
16
-        "machine_center_is_zero": {
17
-            "default": false
18
-        },
19
-        "machine_nozzle_size": {
20
-            "default": 0.4
21
-        },
22
-        "machine_head_shape_min_x": {
23
-            "default": 75
24
-        },
25
-        "machine_head_shape_min_y": {
26
-            "default": 18
27
-        },
28
-        "machine_head_shape_max_x": {
29
-            "default": 18
30
-        },
31
-        "machine_head_shape_max_y": {
32
-            "default": 35
33
-        },
34
-        "machine_nozzle_gantry_distance": {
35
-            "default": 55
36
-        },
37
-        "machine_nozzle_offset_x_1": {
38
-            "default": 18
39
-        },
40
-        "machine_nozzle_offset_y_1": {
41
-            "default": 0
42
-        },
43
-        "machine_gcode_flavor": {
44
-            "default": "RepRap"
45
-        },
46
-        "machine_start_gcode": {
47
-            "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM104 S{print_temperature} ; begin heating nozzle\nG28 X0 Y0 ;move X/Y to min endstops\nM140 S{print_bed_temperature} ; begin heating bed\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E1 ;extrude 1mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
48
-        },
49
-        "machine_end_gcode": {
50
-            "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
51
-        }
52
-    },
53
-    "categories": {
54
-        "material": {
55
-            "settings": {
56
-                "material_bed_temperature": {
57
-                    "visible": true
58
-                }
59
-            }
60
-        }
61
-    }
62
-}

+ 120
- 0
slic3r-ctc-i3-flexismart.ini Ver fichero

@@ -0,0 +1,120 @@
1
+# generated by Slic3r 1.1.7 on Sat Mar 17 19:03:41 2018
2
+avoid_crossing_perimeters = 1
3
+bed_size = 195,183
4
+bed_temperature = 30
5
+bottom_solid_layers = 4
6
+bridge_acceleration = 0
7
+bridge_fan_speed = 100
8
+bridge_flow_ratio = 1
9
+bridge_speed = 60
10
+brim_width = 0
11
+complete_objects = 0
12
+cooling = 1
13
+default_acceleration = 0
14
+disable_fan_first_layers = 1
15
+dont_support_bridges = 1
16
+duplicate_distance = 6
17
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F4000 ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y180  ; move out of the way\nM84     ; disable motors\nM117 Finished!\n
18
+external_perimeter_speed = 70%
19
+external_perimeters_first = 0
20
+extra_perimeters = 1
21
+extruder_clearance_height = 20
22
+extruder_clearance_radius = 20
23
+extruder_offset = 0x0
24
+extrusion_axis = E
25
+extrusion_multiplier = 1
26
+extrusion_width = 0
27
+fan_always_on = 0
28
+fan_below_layer_time = 60
29
+filament_diameter = 1.75
30
+fill_angle = 45
31
+fill_density = 15%
32
+fill_pattern = honeycomb
33
+first_layer_acceleration = 0
34
+first_layer_bed_temperature = 35
35
+first_layer_extrusion_width = 200%
36
+first_layer_height = 150%
37
+first_layer_speed = 30%
38
+first_layer_temperature = 195
39
+g0 = 0
40
+gap_fill_speed = 20
41
+gcode_arcs = 0
42
+gcode_comments = 0
43
+gcode_flavor = reprap
44
+infill_acceleration = 0
45
+infill_every_layers = 1
46
+infill_extruder = 1
47
+infill_extrusion_width = 0
48
+infill_first = 0
49
+infill_only_where_needed = 0
50
+infill_speed = 60
51
+interface_shells = 0
52
+layer_gcode = 
53
+layer_height = 0.2
54
+max_fan_speed = 100
55
+min_fan_speed = 35
56
+min_print_speed = 15
57
+min_skirt_length = 10
58
+notes = 
59
+nozzle_diameter = 0.4
60
+only_retract_when_crossing_perimeters = 1
61
+ooze_prevention = 0
62
+output_filename_format = [input_filename_base].gcode
63
+overhangs = 1
64
+perimeter_acceleration = 0
65
+perimeter_extruder = 1
66
+perimeter_extrusion_width = 0
67
+perimeter_speed = 50
68
+perimeters = 4
69
+post_process = 
70
+print_center = 97.5,91.5
71
+raft_layers = 0
72
+resolution = 0
73
+retract_before_travel = 2
74
+retract_layer_change = 0
75
+retract_length = 1
76
+retract_length_toolchange = 2
77
+retract_lift = 0.18
78
+retract_restart_extra = 0
79
+retract_restart_extra_toolchange = 0
80
+retract_speed = 40
81
+seam_position = nearest
82
+skirt_distance = 2
83
+skirt_height = 1
84
+skirts = 3
85
+slowdown_below_layer_time = 10
86
+small_perimeter_speed = 30
87
+solid_fill_pattern = rectilinear
88
+solid_infill_below_area = 70
89
+solid_infill_every_layers = 0
90
+solid_infill_extrusion_width = 0
91
+solid_infill_speed = 60
92
+spiral_vase = 0
93
+standby_temperature_delta = -5
94
+start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nG29 ; perform auto bed leveling\nM104 S[first_layer_temperature_0] ; start heating extruder\nG0 X10 Y10 F4000 ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature_0] ; wait for heating extruder\nG0 Z0.2 ; move z down\nG92 E0 ; zero extruder\nG1 X40 E3 F1000 ; print a line\nG1 E-2 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F4000 ; lift nozzle\nG0 X97 Y91 ; move to center\nM117 Printing...\n
95
+support_material = 0
96
+support_material_angle = 0
97
+support_material_enforce_layers = 0
98
+support_material_extruder = 1
99
+support_material_extrusion_width = 0
100
+support_material_interface_extruder = 1
101
+support_material_interface_layers = 3
102
+support_material_interface_spacing = 0
103
+support_material_interface_speed = 100%
104
+support_material_pattern = pillars
105
+support_material_spacing = 2.5
106
+support_material_speed = 60
107
+support_material_threshold = 0
108
+temperature = 195
109
+thin_walls = 1
110
+threads = 2
111
+toolchange_gcode = 
112
+top_infill_extrusion_width = 120%
113
+top_solid_infill_speed = 50
114
+top_solid_layers = 4
115
+travel_speed = 100
116
+use_firmware_retraction = 0
117
+use_relative_e_distances = 0
118
+vibration_limit = 0
119
+wipe = 0
120
+z_offset = 0

+ 120
- 0
slic3r-ctc-i3-pla.ini Ver fichero

@@ -0,0 +1,120 @@
1
+# generated by Slic3r 1.1.7 on Sat Mar 17 19:03:24 2018
2
+avoid_crossing_perimeters = 0
3
+bed_size = 195,183
4
+bed_temperature = 50
5
+bottom_solid_layers = 4
6
+bridge_acceleration = 0
7
+bridge_fan_speed = 100
8
+bridge_flow_ratio = 1
9
+bridge_speed = 60
10
+brim_width = 0
11
+complete_objects = 0
12
+cooling = 1
13
+default_acceleration = 0
14
+disable_fan_first_layers = 1
15
+dont_support_bridges = 1
16
+duplicate_distance = 6
17
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F4000 ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y180  ; move out of the way\nM84     ; disable motors\nM117 Finished!\n
18
+external_perimeter_speed = 70%
19
+external_perimeters_first = 0
20
+extra_perimeters = 1
21
+extruder_clearance_height = 20
22
+extruder_clearance_radius = 20
23
+extruder_offset = 0x0
24
+extrusion_axis = E
25
+extrusion_multiplier = 1
26
+extrusion_width = 0
27
+fan_always_on = 0
28
+fan_below_layer_time = 60
29
+filament_diameter = 1.75
30
+fill_angle = 45
31
+fill_density = 15%
32
+fill_pattern = honeycomb
33
+first_layer_acceleration = 0
34
+first_layer_bed_temperature = 50
35
+first_layer_extrusion_width = 200%
36
+first_layer_height = 150%
37
+first_layer_speed = 30%
38
+first_layer_temperature = 195
39
+g0 = 0
40
+gap_fill_speed = 20
41
+gcode_arcs = 0
42
+gcode_comments = 0
43
+gcode_flavor = reprap
44
+infill_acceleration = 0
45
+infill_every_layers = 1
46
+infill_extruder = 1
47
+infill_extrusion_width = 0
48
+infill_first = 0
49
+infill_only_where_needed = 0
50
+infill_speed = 60
51
+interface_shells = 0
52
+layer_gcode = 
53
+layer_height = 0.2
54
+max_fan_speed = 100
55
+min_fan_speed = 35
56
+min_print_speed = 15
57
+min_skirt_length = 10
58
+notes = 
59
+nozzle_diameter = 0.4
60
+only_retract_when_crossing_perimeters = 1
61
+ooze_prevention = 0
62
+output_filename_format = [input_filename_base].gcode
63
+overhangs = 1
64
+perimeter_acceleration = 0
65
+perimeter_extruder = 1
66
+perimeter_extrusion_width = 0
67
+perimeter_speed = 50
68
+perimeters = 4
69
+post_process = 
70
+print_center = 97.5,91.5
71
+raft_layers = 0
72
+resolution = 0
73
+retract_before_travel = 2
74
+retract_layer_change = 0
75
+retract_length = 1
76
+retract_length_toolchange = 2
77
+retract_lift = 0.18
78
+retract_restart_extra = 0
79
+retract_restart_extra_toolchange = 0
80
+retract_speed = 40
81
+seam_position = aligned
82
+skirt_distance = 2
83
+skirt_height = 1
84
+skirts = 3
85
+slowdown_below_layer_time = 10
86
+small_perimeter_speed = 30
87
+solid_fill_pattern = rectilinear
88
+solid_infill_below_area = 70
89
+solid_infill_every_layers = 0
90
+solid_infill_extrusion_width = 0
91
+solid_infill_speed = 60
92
+spiral_vase = 0
93
+standby_temperature_delta = -5
94
+start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nG29 ; perform auto bed leveling\nM104 S[first_layer_temperature_0] ; start heating extruder\nG0 X10 Y10 F4000 ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature_0] ; wait for heating extruder\nG0 Z0.2 ; move z down\nG92 E0 ; zero extruder\nG1 X40 E3 F1000 ; print a line\nG1 E-2 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F4000 ; lift nozzle\nG0 X97 Y91 ; move to center\nM117 Printing...\n
95
+support_material = 0
96
+support_material_angle = 0
97
+support_material_enforce_layers = 0
98
+support_material_extruder = 1
99
+support_material_extrusion_width = 0
100
+support_material_interface_extruder = 1
101
+support_material_interface_layers = 3
102
+support_material_interface_spacing = 0
103
+support_material_interface_speed = 100%
104
+support_material_pattern = pillars
105
+support_material_spacing = 2.5
106
+support_material_speed = 60
107
+support_material_threshold = 0
108
+temperature = 190
109
+thin_walls = 1
110
+threads = 2
111
+toolchange_gcode = 
112
+top_infill_extrusion_width = 120%
113
+top_solid_infill_speed = 50
114
+top_solid_layers = 4
115
+travel_speed = 100
116
+use_firmware_retraction = 0
117
+use_relative_e_distances = 0
118
+vibration_limit = 0
119
+wipe = 0
120
+z_offset = 0

Loading…
Cancelar
Guardar