_description: Imported from Cura_CTC_i3_Pro_B.ini on 2018-01-06 17:07 _display_name: CTC i3 Flex bottom_layer_speed: 15.0 bottom_thickness: 0.2 brim_line_count: 20 cool_head_lift: false cool_min_feedrate: 10 cool_min_layer_time: 10 end_gcode: - 'M104 S0 M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-0.5 F40 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more G90 ;absolute positioning G1 X0 Y180 F{travel_speed} ;move X to min endstops, y to max so the head is out of the way M84 ;steppers off M117 Finished!' - ';End GCode M104 T0 S0 ;extruder heater off M104 T1 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-0.5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way M84 ;steppers off G90 ;absolute positioning ;{profile_string}' - ';End GCode M104 T0 S0 ;extruder heater off M104 T1 S0 ;extruder heater off M104 T2 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-0.5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way M84 ;steppers off G90 ;absolute positioning ;{profile_string}' - ';End GCode M104 T0 S0 ;extruder heater off M104 T1 S0 ;extruder heater off M104 T2 S0 ;extruder heater off M104 T3 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-0.5 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way M84 ;steppers off G90 ;absolute positioning ;{profile_string}' fan_enabled: true fan_full_height: 1.5 fan_speed: 30 fan_speed_max: 100 filament_diameter: - 1.75 - false - false - false filament_flow: 100.0 fill_density: 15 fill_overlap: 15 first_layer_width_factor: 110 fix_horrible_extensive_stitching: false fix_horrible_union_all_type_a: true fix_horrible_union_all_type_b: false fix_horrible_use_open_bits: false follow_surface: false infill_speed: 0.0 inner_shell_speed: 0.0 layer_height: 0.2 object_sink: 0.0 ooze_shield: false outer_shell_speed: 40.0 overlap_dual: 0.15 perimeter_before_infill: false platform_adhesion: none print_bed_temperature: 30 print_speed: 50 print_temperature: - 195 - false - false - false raft_airgap: 0.22 raft_airgap_all: 0.0 raft_base_linewidth: 1.0 raft_base_thickness: 0.3 raft_interface_linewidth: 0.4 raft_interface_thickness: 0.27 raft_line_spacing: 3.0 raft_margin: 5.0 raft_surface_layers: 2 raft_surface_linewidth: 0.4 raft_surface_thickness: 0.27 retraction_amount: 1.0 retraction_combing: all retraction_dual_amount: 16.5 retraction_enable: true retraction_hop: 0.18 retraction_min_travel: 1.5 retraction_minimal_extrusion: 0.02 retraction_speed: 40.0 skirt_gap: 3.0 skirt_line_count: 3 skirt_minimal_length: 150.0 solid_bottom: true solid_layer_thickness: 1.0 solid_top: true solidarea_speed: 0.0 spiralize: false start_gcode: - ';Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 ;move X/Y/Z to min endstops G29 ;perform auto bed leveling G1 X0.0 Y0.0 F{travel_speed} M140 S{print_bed_temperature} ;Heat Print bed and don''t wait M104 S{print_temperature} ;Heat extruder and don''t wait M190 S{print_bed_temperature} ;Heat Print bed and wait M109 S{print_temperature} ;Heat extruder and wait G1 Z5.0 F{travel_speed} ;move the platform down 5mm G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10 G1 Z0.15 F{travel_speed} ;move Z to first layer height G92 E0 ;zero the extruded length G1 X30.0 E3 F300 ;extrude 3mm of feed stock and move X 20mm G92 E0 ;zero the extruded length again G1 Z10.0 F{travel_speed} ;move platform down 5mm more G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...' - ';Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line ;M104 S{print_temperature} ;Uncomment to add your own temperature line ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line G21 ;metric values G90 ;absolute positioning M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm T1 ;Switch to the 2nd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T0 ;Switch to the first extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...' - ';Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line ;M104 S{print_temperature} ;Uncomment to add your own temperature line ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line G21 ;metric values G90 ;absolute positioning M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm T2 ;Switch to the 3rd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T1 ;Switch to the 2nd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T0 ;Switch to the first extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...' - ';Sliced at: {day} {date} {time} ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} ;Print time: {print_time} ;Filament used: {filament_amount}m {filament_weight}g ;Filament cost: {filament_cost} ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line ;M104 S{print_temperature} ;Uncomment to add your own temperature line ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line G21 ;metric values G90 ;absolute positioning M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm T3 ;Switch to the 4th extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T2 ;Switch to the 3rd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T1 ;Switch to the 2nd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F200 E-{retraction_dual_amount} T0 ;Switch to the first extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again G1 F{travel_speed} ;Put printing message on LCD screen M117 Printing...' support: none support_angle: 60 support_dual_extrusion: both support_fill_rate: 15 support_type: lines support_xy_distance: 0.7 support_z_distance: 0.15 travel_speed: 100 wall_thickness: 1.0 wipe_tower: false wipe_tower_volume: 15