{
    "id": "fabrikator-mini-bed",
    "name": "Fabrikator Mini",
    "version": 1,
    "inherits": "fdmprinter.json",
    "machine_settings": {
        "machine_width": {
            "default": 80
        },
        "machine_height": {
            "default": 80
        },
        "machine_depth": {
            "default": 80
        },
        "machine_center_is_zero": {
            "default": false
        },
        "machine_nozzle_size": {
            "default": 0.4
        },
        "machine_head_shape_min_x": {
            "default": 75
        },
        "machine_head_shape_min_y": {
            "default": 18
        },
        "machine_head_shape_max_x": {
            "default": 18
        },
        "machine_head_shape_max_y": {
            "default": 35
        },
        "machine_nozzle_gantry_distance": {
            "default": 55
        },
        "machine_nozzle_offset_x_1": {
            "default": 18
        },
        "machine_nozzle_offset_y_1": {
            "default": 0
        },
        "machine_gcode_flavor": {
            "default": "RepRap"
        },
        "machine_start_gcode": {
            "default": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM104 S{print_temperature} ; begin heating nozzle\nG28 X0 Y0 ;move X/Y to min endstops\nM140 S{print_bed_temperature} ; begin heating bed\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E1 ;extrude 1mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
        },
        "machine_end_gcode": {
            "default": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
        }
    },
    "categories": {
        "material": {
            "settings": {
                "material_bed_temperature": {
                    "visible": true
                }
            }
        }
    }
}