_description: Imported from Cura_CTC_i3_Pro_B.ini on 2018-01-06 17:07
_display_name: Cura_CTC_i3_Pro_B
bottom_layer_speed: 50.0
bottom_thickness: 0.3
brim_line_count: 20
cool_head_lift: false
cool_min_feedrate: 10
cool_min_layer_time: 10
end_gcode:
- 'M104 S0
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-0.5 F40 ;retract the filament a bit before lifting the nozzle,
to release some of the pressure
G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
G90 ;absolute positioning
G1 X0 Y180 F{travel_speed} ;move X to min endstops, y to max so the head is
out of the way
M84 ;steppers off
M117 Finished!'
- ';End GCode
M104 T0 S0 ;extruder heater off
M104 T1 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-0.5 F300 ;retract the filament a bit before lifting
the nozzle, to release some of the pressure
G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
more
G28 X0 Y0 ;move X/Y to min endstops, so the head is
out of the way
M84 ;steppers off
G90 ;absolute positioning
;{profile_string}'
- ';End GCode
M104 T0 S0 ;extruder heater off
M104 T1 S0 ;extruder heater off
M104 T2 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-0.5 F300 ;retract the filament a bit before lifting
the nozzle, to release some of the pressure
G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
more
G28 X0 Y0 ;move X/Y to min endstops, so the head is
out of the way
M84 ;steppers off
G90 ;absolute positioning
;{profile_string}'
- ';End GCode
M104 T0 S0 ;extruder heater off
M104 T1 S0 ;extruder heater off
M104 T2 S0 ;extruder heater off
M104 T3 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-0.5 F300 ;retract the filament a bit before lifting
the nozzle, to release some of the pressure
G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
more
G28 X0 Y0 ;move X/Y to min endstops, so the head is
out of the way
M84 ;steppers off
G90 ;absolute positioning
;{profile_string}'
fan_enabled: true
fan_full_height: 1.5
fan_speed: 30
fan_speed_max: 100
filament_diameter:
- 1.75
- false
- false
- false
filament_flow: 100.0
fill_density: 40
fill_overlap: 15
first_layer_width_factor: 110
fix_horrible_extensive_stitching: false
fix_horrible_union_all_type_a: true
fix_horrible_union_all_type_b: false
fix_horrible_use_open_bits: false
follow_surface: false
infill_speed: 0.0
inner_shell_speed: 0.0
layer_height: 0.2
object_sink: 0.0
ooze_shield: false
outer_shell_speed: 0.0
overlap_dual: 0.15
perimeter_before_infill: false
platform_adhesion: none
print_bed_temperature: 60
print_speed: 60
print_temperature:
- 195
- false
- false
- false
raft_airgap: 0.22
raft_airgap_all: 0.0
raft_base_linewidth: 1.0
raft_base_thickness: 0.3
raft_interface_linewidth: 0.4
raft_interface_thickness: 0.27
raft_line_spacing: 3.0
raft_margin: 5.0
raft_surface_layers: 2
raft_surface_linewidth: 0.4
raft_surface_thickness: 0.27
retraction_amount: 1.0
retraction_combing: all
retraction_dual_amount: 16.5
retraction_enable: true
retraction_hop: 0.18
retraction_min_travel: 1.5
retraction_minimal_extrusion: 0.02
retraction_speed: 40.0
skirt_gap: 3.0
skirt_line_count: 3
skirt_minimal_length: 150.0
solid_bottom: true
solid_layer_thickness: 0.8
solid_top: true
solidarea_speed: 0.0
spiralize: false
start_gcode:
- ';Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
M140 S{print_bed_temperature} ;Heat Print bed and don''t wait
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ;move X/Y/Z to min endstops
G29 ;perform auto bed leveling
M104 S{print_temperature} ;Heat extruder and don''t wait
M190 S{print_bed_temperature} ;Heat Print bed and wait
M109 S{print_temperature} ;Heat extruder and wait
G1 Z5.0 F{travel_speed} ;move the platform down 5mm
G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
G1 Z0.15 F{travel_speed} ;move Z to first layer height
G92 E0 ;zero the extruded length
G1 X30.0 E3 F300 ;extrude 3mm of feed stock and move X 20mm
G92 E0 ;zero the extruded length again
G1 Z10.0 F{travel_speed} ;move platform down 5mm more
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...'
- ';Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M104 S{print_temperature} ;Uncomment to add your own temperature line
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
T1 ;Switch to the 2nd extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T0 ;Switch to the first extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...'
- ';Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M104 S{print_temperature} ;Uncomment to add your own temperature line
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
T2 ;Switch to the 3rd extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T1 ;Switch to the 2nd extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T0 ;Switch to the first extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...'
- ';Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
;M104 S{print_temperature} ;Uncomment to add your own temperature line
;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
T3 ;Switch to the 4th extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T2 ;Switch to the 3rd extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T1 ;Switch to the 2nd extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F200 E-{retraction_dual_amount}
T0 ;Switch to the first extruder
G92 E0 ;zero the extruded length
G1 F200 E10 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
;Put printing message on LCD screen
M117 Printing...'
support: none
support_angle: 60
support_dual_extrusion: both
support_fill_rate: 15
support_type: lines
support_xy_distance: 0.7
support_z_distance: 0.15
travel_speed: 100
wall_thickness: 0.8
wipe_tower: false
wipe_tower_volume: 15