My self-made 3D-printable designs, mainly in OpenSCAD
Nevar pievienot vairāk kā 25 tēmas Tēmai ir jāsākas ar burtu vai ciparu, tā var saturēt domu zīmes ('-') un var būt līdz 35 simboliem gara.

Cura_Fabrikator_Mini.ini 11KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263
  1. [profile]
  2. layer_height = 0.2
  3. wall_thickness = 0.8
  4. retraction_enable = True
  5. solid_layer_thickness = 0.8
  6. fill_density = 40
  7. print_speed = 20
  8. print_temperature = 190
  9. print_temperature2 = 0
  10. print_temperature3 = 0
  11. print_temperature4 = 0
  12. print_temperature5 = 0
  13. print_bed_temperature = 65
  14. support = None
  15. platform_adhesion = None
  16. support_dual_extrusion = Both
  17. wipe_tower = False
  18. wipe_tower_volume = 15
  19. ooze_shield = False
  20. filament_diameter = 1.75
  21. filament_diameter2 = 0
  22. filament_diameter3 = 0
  23. filament_diameter4 = 0
  24. filament_diameter5 = 0
  25. filament_flow = 100.0
  26. nozzle_size = 0.4
  27. retraction_speed = 40.0
  28. retraction_amount = 4.5
  29. retraction_dual_amount = 16.5
  30. retraction_min_travel = 1.0
  31. retraction_combing = All
  32. retraction_minimal_extrusion = 0.02
  33. retraction_hop = 0.08
  34. bottom_thickness = 0.3
  35. layer0_width_factor = 110
  36. object_sink = 0.0
  37. overlap_dual = 0.12
  38. travel_speed = 30.0
  39. bottom_layer_speed = 18
  40. infill_speed = 20
  41. solidarea_speed = 20
  42. inset0_speed = 20
  43. insetx_speed = 20
  44. cool_min_layer_time = 15
  45. fan_enabled = True
  46. skirt_line_count = 3
  47. skirt_gap = 1.0
  48. skirt_minimal_length = 300.0
  49. fan_full_height = 0.5
  50. fan_speed = 100
  51. fan_speed_max = 100
  52. cool_min_feedrate = 10
  53. cool_head_lift = False
  54. solid_top = True
  55. solid_bottom = True
  56. fill_overlap = 15
  57. perimeter_before_infill = False
  58. support_type = Grid
  59. support_angle = 60
  60. support_fill_rate = 15
  61. support_xy_distance = 0.7
  62. support_z_distance = 0.1
  63. spiralize = False
  64. simple_mode = False
  65. brim_line_count = 3
  66. raft_margin = 3.0
  67. raft_line_spacing = 3.0
  68. raft_base_thickness = 0.3
  69. raft_base_linewidth = 1.0
  70. raft_interface_thickness = 0.2
  71. raft_interface_linewidth = 0.4
  72. raft_airgap_all = 0.2
  73. raft_airgap = 0.2
  74. raft_surface_layers = 2
  75. raft_surface_thickness = 0.2
  76. raft_surface_linewidth = 0.4
  77. fix_horrible_union_all_type_a = True
  78. fix_horrible_union_all_type_b = False
  79. fix_horrible_use_open_bits = False
  80. fix_horrible_extensive_stitching = False
  81. plugin_config =
  82. object_center_x = -1
  83. object_center_y = -1
  84. [alterations]
  85. start.gcode = ; Sliced at: {day} {date} {time}
  86. ; Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  87. ; Print time: {print_time}
  88. ; Filament used: {filament_amount}m {filament_weight}g
  89. ; Filament cost: {filament_cost}
  90. ;M190 S{print_bed_temperature} ; Uncomment to add your own bed temperature line
  91. ;M109 S{print_temperature} ; Uncomment to add your own temperature line
  92. G21 ; metric values
  93. G90 ; absolute positioning
  94. M82 ; set extruder to absolute mode
  95. M107 ; start with the fan off
  96. M104 S{print_temperature} ; begin heating nozzle
  97. M140 S{print_bed_temperature} ; begin heating bed
  98. G28 ; home all axes, needed for mesh leveling!
  99. M420 S1 ; enable mesh bed leveling
  100. G1 Z10.0 F{travel_speed} ; move the platform down 10mm
  101. G1 X40 Y40 F{travel_speed} ; move to center to avoid tape edge
  102. M190 S{print_bed_temperature} ; Wait for bed temp
  103. M109 S{print_temperature} ; Wait for nozzle temp
  104. G92 E0 ; zero the extruded length
  105. G1 F200 E1 ; extrude 1mm of feed stock
  106. G92 E0 ; zero the extruded length again
  107. G1 F{travel_speed} ; set default travel speed
  108. ; Put printing message on LCD screen
  109. M117 Printing...
  110. end.gcode = ; End GCode
  111. M104 S0 ; extruder heater off
  112. M140 S0 ; heated bed heater off (if you have it)
  113. G91 ; relative positioning
  114. G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure
  115. G1 Z+0.5 E-5 F{travel_speed} ; move Z up a bit and retract filament even more
  116. G90 ; absolute positioning
  117. G1 X1 Y79 ; move x/y without homing to keep leveling on
  118. M84 ; steppers off
  119. ; {profile_string}
  120. start2.gcode = ;Sliced at: {day} {date} {time}
  121. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  122. ;Print time: {print_time}
  123. ;Filament used: {filament_amount}m {filament_weight}g
  124. ;Filament cost: {filament_cost}
  125. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  126. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  127. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  128. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  129. G21 ;metric values
  130. G90 ;absolute positioning
  131. M107 ;start with the fan off
  132. G28 X0 Y0 ;move X/Y to min endstops
  133. G28 Z0 ;move Z to min endstops
  134. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  135. T1 ;Switch to the 2nd extruder
  136. G92 E0 ;zero the extruded length
  137. G1 F200 E10 ;extrude 10mm of feed stock
  138. G92 E0 ;zero the extruded length again
  139. G1 F200 E-{retraction_dual_amount}
  140. T0 ;Switch to the first extruder
  141. G92 E0 ;zero the extruded length
  142. G1 F200 E10 ;extrude 10mm of feed stock
  143. G92 E0 ;zero the extruded length again
  144. G1 F{travel_speed}
  145. ;Put printing message on LCD screen
  146. M117 Printing...
  147. end2.gcode = ;End GCode
  148. M104 T0 S0 ;extruder heater off
  149. M104 T1 S0 ;extruder heater off
  150. M140 S0 ;heated bed heater off (if you have it)
  151. G91 ;relative positioning
  152. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  153. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  154. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  155. M84 ;steppers off
  156. G90 ;absolute positioning
  157. ;{profile_string}
  158. start3.gcode = ;Sliced at: {day} {date} {time}
  159. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  160. ;Print time: {print_time}
  161. ;Filament used: {filament_amount}m {filament_weight}g
  162. ;Filament cost: {filament_cost}
  163. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  164. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  165. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  166. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  167. G21 ;metric values
  168. G90 ;absolute positioning
  169. M107 ;start with the fan off
  170. G28 X0 Y0 ;move X/Y to min endstops
  171. G28 Z0 ;move Z to min endstops
  172. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  173. T2 ;Switch to the 3rd extruder
  174. G92 E0 ;zero the extruded length
  175. G1 F200 E10 ;extrude 10mm of feed stock
  176. G92 E0 ;zero the extruded length again
  177. G1 F200 E-{retraction_dual_amount}
  178. T1 ;Switch to the 2nd extruder
  179. G92 E0 ;zero the extruded length
  180. G1 F200 E10 ;extrude 10mm of feed stock
  181. G92 E0 ;zero the extruded length again
  182. G1 F200 E-{retraction_dual_amount}
  183. T0 ;Switch to the first extruder
  184. G92 E0 ;zero the extruded length
  185. G1 F200 E10 ;extrude 10mm of feed stock
  186. G92 E0 ;zero the extruded length again
  187. G1 F{travel_speed}
  188. ;Put printing message on LCD screen
  189. M117 Printing...
  190. end3.gcode = ;End GCode
  191. M104 T0 S0 ;extruder heater off
  192. M104 T1 S0 ;extruder heater off
  193. M104 T2 S0 ;extruder heater off
  194. M140 S0 ;heated bed heater off (if you have it)
  195. G91 ;relative positioning
  196. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  197. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  198. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  199. M84 ;steppers off
  200. G90 ;absolute positioning
  201. ;{profile_string}
  202. start4.gcode = ;Sliced at: {day} {date} {time}
  203. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  204. ;Print time: {print_time}
  205. ;Filament used: {filament_amount}m {filament_weight}g
  206. ;Filament cost: {filament_cost}
  207. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  208. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  209. ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
  210. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  211. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  212. G21 ;metric values
  213. G90 ;absolute positioning
  214. M107 ;start with the fan off
  215. G28 X0 Y0 ;move X/Y to min endstops
  216. G28 Z0 ;move Z to min endstops
  217. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  218. T3 ;Switch to the 4th extruder
  219. G92 E0 ;zero the extruded length
  220. G1 F200 E10 ;extrude 10mm of feed stock
  221. G92 E0 ;zero the extruded length again
  222. G1 F200 E-{retraction_dual_amount}
  223. T2 ;Switch to the 3rd extruder
  224. G92 E0 ;zero the extruded length
  225. G1 F200 E10 ;extrude 10mm of feed stock
  226. G92 E0 ;zero the extruded length again
  227. G1 F200 E-{retraction_dual_amount}
  228. T1 ;Switch to the 2nd extruder
  229. G92 E0 ;zero the extruded length
  230. G1 F200 E10 ;extrude 10mm of feed stock
  231. G92 E0 ;zero the extruded length again
  232. G1 F200 E-{retraction_dual_amount}
  233. T0 ;Switch to the first extruder
  234. G92 E0 ;zero the extruded length
  235. G1 F200 E10 ;extrude 10mm of feed stock
  236. G92 E0 ;zero the extruded length again
  237. G1 F{travel_speed}
  238. ;Put printing message on LCD screen
  239. M117 Printing...
  240. end4.gcode = ;End GCode
  241. M104 T0 S0 ;extruder heater off
  242. M104 T1 S0 ;extruder heater off
  243. M104 T2 S0 ;extruder heater off
  244. M104 T3 S0 ;extruder heater off
  245. M140 S0 ;heated bed heater off (if you have it)
  246. G91 ;relative positioning
  247. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  248. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  249. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  250. M84 ;steppers off
  251. G90 ;absolute positioning
  252. ;{profile_string}
  253. support_start.gcode =
  254. support_end.gcode =
  255. cool_start.gcode =
  256. cool_end.gcode =
  257. replace.csv =
  258. preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
  259. ;This code is added before the T(n)
  260. postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
  261. ;This code is added after the T(n)