3d-print-designs/SlicingProfiles/Slic3r/slic3r-ctc-i3-pla.ini

# generated by Slic3r 1.1.7 on Sat Mar 17 19:03:24 2018
avoid_crossing_perimeters = 0
bed_size = 195,183
bed_temperature = 50
bottom_solid_layers = 4
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F4000 ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y180  ; move out of the way\nM84     ; disable motors\nM117 Finished!\n
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
fill_density = 15%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 50
first_layer_extrusion_width = 200%
first_layer_height = 150%
first_layer_speed = 30%
first_layer_temperature = 195
g0 = 0
gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode = 
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 15
min_skirt_length = 10
notes = 
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 4
post_process = 
print_center = 97.5,91.5
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 0
retract_length = 1
retract_length_toolchange = 2
retract_lift = 0.18
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
seam_position = aligned
skirt_distance = 2
skirt_height = 1
skirts = 3
slowdown_below_layer_time = 10
small_perimeter_speed = 30
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nG29 ; perform auto bed leveling\nM104 S[first_layer_temperature_0] ; start heating extruder\nG0 X10 Y10 F4000 ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature_0] ; wait for heating extruder\nG0 Z0.2 ; move z down\nG92 E0 ; zero extruder\nG1 X40 E3 F1000 ; print a line\nG1 E-2 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F4000 ; lift nozzle\nG0 X97 Y91 ; move to center\nM117 Printing...\n
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 190
thin_walls = 1
threads = 2
toolchange_gcode = 
top_infill_extrusion_width = 120%
top_solid_infill_speed = 50
top_solid_layers = 4
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0