My self-made 3D-printable designs, mainly in OpenSCAD
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

octoprint_i3_flex.profile 11KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421
  1. _description: Imported from Cura_CTC_i3_Pro_B.ini on 2018-01-06 17:07
  2. _display_name: CTC i3 Flex
  3. bottom_layer_speed: 15.0
  4. bottom_thickness: 0.2
  5. brim_line_count: 20
  6. cool_head_lift: false
  7. cool_min_feedrate: 10
  8. cool_min_layer_time: 10
  9. end_gcode:
  10. - 'M104 S0
  11. M140 S0 ;heated bed heater off (if you have it)
  12. G91 ;relative positioning
  13. G1 E-0.5 F40 ;retract the filament a bit before lifting the nozzle,
  14. to release some of the pressure
  15. G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
  16. G90 ;absolute positioning
  17. G1 X0 Y180 F{travel_speed} ;move X to min endstops, y to max so the head is
  18. out of the way
  19. M84 ;steppers off
  20. M117 Finished!'
  21. - ';End GCode
  22. M104 T0 S0 ;extruder heater off
  23. M104 T1 S0 ;extruder heater off
  24. M140 S0 ;heated bed heater off (if you have it)
  25. G91 ;relative positioning
  26. G1 E-0.5 F300 ;retract the filament a bit before lifting
  27. the nozzle, to release some of the pressure
  28. G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
  29. more
  30. G28 X0 Y0 ;move X/Y to min endstops, so the head is
  31. out of the way
  32. M84 ;steppers off
  33. G90 ;absolute positioning
  34. ;{profile_string}'
  35. - ';End GCode
  36. M104 T0 S0 ;extruder heater off
  37. M104 T1 S0 ;extruder heater off
  38. M104 T2 S0 ;extruder heater off
  39. M140 S0 ;heated bed heater off (if you have it)
  40. G91 ;relative positioning
  41. G1 E-0.5 F300 ;retract the filament a bit before lifting
  42. the nozzle, to release some of the pressure
  43. G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
  44. more
  45. G28 X0 Y0 ;move X/Y to min endstops, so the head is
  46. out of the way
  47. M84 ;steppers off
  48. G90 ;absolute positioning
  49. ;{profile_string}'
  50. - ';End GCode
  51. M104 T0 S0 ;extruder heater off
  52. M104 T1 S0 ;extruder heater off
  53. M104 T2 S0 ;extruder heater off
  54. M104 T3 S0 ;extruder heater off
  55. M140 S0 ;heated bed heater off (if you have it)
  56. G91 ;relative positioning
  57. G1 E-0.5 F300 ;retract the filament a bit before lifting
  58. the nozzle, to release some of the pressure
  59. G1 Z+0.5 E-0.5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even
  60. more
  61. G28 X0 Y0 ;move X/Y to min endstops, so the head is
  62. out of the way
  63. M84 ;steppers off
  64. G90 ;absolute positioning
  65. ;{profile_string}'
  66. fan_enabled: true
  67. fan_full_height: 1.5
  68. fan_speed: 30
  69. fan_speed_max: 100
  70. filament_diameter:
  71. - 1.75
  72. - false
  73. - false
  74. - false
  75. filament_flow: 100.0
  76. fill_density: 15
  77. fill_overlap: 15
  78. first_layer_width_factor: 110
  79. fix_horrible_extensive_stitching: false
  80. fix_horrible_union_all_type_a: true
  81. fix_horrible_union_all_type_b: false
  82. fix_horrible_use_open_bits: false
  83. follow_surface: false
  84. infill_speed: 0.0
  85. inner_shell_speed: 0.0
  86. layer_height: 0.2
  87. object_sink: 0.0
  88. ooze_shield: false
  89. outer_shell_speed: 40.0
  90. overlap_dual: 0.15
  91. perimeter_before_infill: false
  92. platform_adhesion: none
  93. print_bed_temperature: 30
  94. print_speed: 50
  95. print_temperature:
  96. - 195
  97. - false
  98. - false
  99. - false
  100. raft_airgap: 0.22
  101. raft_airgap_all: 0.0
  102. raft_base_linewidth: 1.0
  103. raft_base_thickness: 0.3
  104. raft_interface_linewidth: 0.4
  105. raft_interface_thickness: 0.27
  106. raft_line_spacing: 3.0
  107. raft_margin: 5.0
  108. raft_surface_layers: 2
  109. raft_surface_linewidth: 0.4
  110. raft_surface_thickness: 0.27
  111. retraction_amount: 1.0
  112. retraction_combing: all
  113. retraction_dual_amount: 16.5
  114. retraction_enable: true
  115. retraction_hop: 0.18
  116. retraction_min_travel: 1.5
  117. retraction_minimal_extrusion: 0.02
  118. retraction_speed: 40.0
  119. skirt_gap: 3.0
  120. skirt_line_count: 3
  121. skirt_minimal_length: 150.0
  122. solid_bottom: true
  123. solid_layer_thickness: 1.0
  124. solid_top: true
  125. solidarea_speed: 0.0
  126. spiralize: false
  127. start_gcode:
  128. - ';Sliced at: {day} {date} {time}
  129. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  130. ;Print time: {print_time}
  131. ;Filament used: {filament_amount}m {filament_weight}g
  132. ;Filament cost: {filament_cost}
  133. G21 ;metric values
  134. G90 ;absolute positioning
  135. M82 ;set extruder to absolute mode
  136. M107 ;start with the fan off
  137. G28 ;move X/Y/Z to min endstops
  138. G29 ;perform auto bed leveling
  139. G1 X0.0 Y0.0 F{travel_speed}
  140. M140 S{print_bed_temperature} ;Heat Print bed and don''t wait
  141. M104 S{print_temperature} ;Heat extruder and don''t wait
  142. M190 S{print_bed_temperature} ;Heat Print bed and wait
  143. M109 S{print_temperature} ;Heat extruder and wait
  144. G1 Z5.0 F{travel_speed} ;move the platform down 5mm
  145. G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
  146. G1 Z0.15 F{travel_speed} ;move Z to first layer height
  147. G92 E0 ;zero the extruded length
  148. G1 X30.0 E3 F300 ;extrude 3mm of feed stock and move X 20mm
  149. G92 E0 ;zero the extruded length again
  150. G1 Z10.0 F{travel_speed} ;move platform down 5mm more
  151. G1 F{travel_speed}
  152. ;Put printing message on LCD screen
  153. M117 Printing...'
  154. - ';Sliced at: {day} {date} {time}
  155. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  156. ;Print time: {print_time}
  157. ;Filament used: {filament_amount}m {filament_weight}g
  158. ;Filament cost: {filament_cost}
  159. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  160. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  161. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  162. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  163. G21 ;metric values
  164. G90 ;absolute positioning
  165. M107 ;start with the fan off
  166. G28 X0 Y0 ;move X/Y to min endstops
  167. G28 Z0 ;move Z to min endstops
  168. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  169. T1 ;Switch to the 2nd extruder
  170. G92 E0 ;zero the extruded length
  171. G1 F200 E10 ;extrude 10mm of feed stock
  172. G92 E0 ;zero the extruded length again
  173. G1 F200 E-{retraction_dual_amount}
  174. T0 ;Switch to the first extruder
  175. G92 E0 ;zero the extruded length
  176. G1 F200 E10 ;extrude 10mm of feed stock
  177. G92 E0 ;zero the extruded length again
  178. G1 F{travel_speed}
  179. ;Put printing message on LCD screen
  180. M117 Printing...'
  181. - ';Sliced at: {day} {date} {time}
  182. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  183. ;Print time: {print_time}
  184. ;Filament used: {filament_amount}m {filament_weight}g
  185. ;Filament cost: {filament_cost}
  186. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  187. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  188. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  189. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  190. G21 ;metric values
  191. G90 ;absolute positioning
  192. M107 ;start with the fan off
  193. G28 X0 Y0 ;move X/Y to min endstops
  194. G28 Z0 ;move Z to min endstops
  195. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  196. T2 ;Switch to the 3rd extruder
  197. G92 E0 ;zero the extruded length
  198. G1 F200 E10 ;extrude 10mm of feed stock
  199. G92 E0 ;zero the extruded length again
  200. G1 F200 E-{retraction_dual_amount}
  201. T1 ;Switch to the 2nd extruder
  202. G92 E0 ;zero the extruded length
  203. G1 F200 E10 ;extrude 10mm of feed stock
  204. G92 E0 ;zero the extruded length again
  205. G1 F200 E-{retraction_dual_amount}
  206. T0 ;Switch to the first extruder
  207. G92 E0 ;zero the extruded length
  208. G1 F200 E10 ;extrude 10mm of feed stock
  209. G92 E0 ;zero the extruded length again
  210. G1 F{travel_speed}
  211. ;Put printing message on LCD screen
  212. M117 Printing...'
  213. - ';Sliced at: {day} {date} {time}
  214. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  215. ;Print time: {print_time}
  216. ;Filament used: {filament_amount}m {filament_weight}g
  217. ;Filament cost: {filament_cost}
  218. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  219. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  220. ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
  221. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  222. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  223. G21 ;metric values
  224. G90 ;absolute positioning
  225. M107 ;start with the fan off
  226. G28 X0 Y0 ;move X/Y to min endstops
  227. G28 Z0 ;move Z to min endstops
  228. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  229. T3 ;Switch to the 4th extruder
  230. G92 E0 ;zero the extruded length
  231. G1 F200 E10 ;extrude 10mm of feed stock
  232. G92 E0 ;zero the extruded length again
  233. G1 F200 E-{retraction_dual_amount}
  234. T2 ;Switch to the 3rd extruder
  235. G92 E0 ;zero the extruded length
  236. G1 F200 E10 ;extrude 10mm of feed stock
  237. G92 E0 ;zero the extruded length again
  238. G1 F200 E-{retraction_dual_amount}
  239. T1 ;Switch to the 2nd extruder
  240. G92 E0 ;zero the extruded length
  241. G1 F200 E10 ;extrude 10mm of feed stock
  242. G92 E0 ;zero the extruded length again
  243. G1 F200 E-{retraction_dual_amount}
  244. T0 ;Switch to the first extruder
  245. G92 E0 ;zero the extruded length
  246. G1 F200 E10 ;extrude 10mm of feed stock
  247. G92 E0 ;zero the extruded length again
  248. G1 F{travel_speed}
  249. ;Put printing message on LCD screen
  250. M117 Printing...'
  251. support: none
  252. support_angle: 60
  253. support_dual_extrusion: both
  254. support_fill_rate: 15
  255. support_type: lines
  256. support_xy_distance: 0.7
  257. support_z_distance: 0.15
  258. travel_speed: 100
  259. wall_thickness: 1.0
  260. wipe_tower: false
  261. wipe_tower_volume: 15