My self-made 3D-printable designs, mainly in OpenSCAD
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

Slic3r_config_bundle.ini 7.5KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313
  1. # generated by Slic3r 1.2.9 on Tue Mar 29 17:16:41 2016
  2. [filament:Fabrikator Mini PLA]
  3. bed_temperature = 0
  4. bridge_fan_speed = 100
  5. cooling = 1
  6. disable_fan_first_layers = 3
  7. extrusion_multiplier = 1
  8. fan_always_on = 1
  9. fan_below_layer_time = 60
  10. filament_colour = #929292
  11. filament_diameter = 1.75
  12. first_layer_bed_temperature = 0
  13. first_layer_temperature = 190
  14. max_fan_speed = 100
  15. min_fan_speed = 35
  16. min_print_speed = 10
  17. slowdown_below_layer_time = 5
  18. temperature = 190
  19. [filament:Simple Mode]
  20. bed_temperature = 0
  21. extrusion_multiplier = 1
  22. filament_diameter = 1.75
  23. first_layer_bed_temperature = 0
  24. first_layer_temperature = 195
  25. temperature = 190
  26. [presets]
  27. filament = Fabrikator Mini PLA.ini
  28. print = Fabrikator Mini.ini
  29. printer = Fabrikator Mini.ini
  30. [print:Fabrikator Mini]
  31. avoid_crossing_perimeters = 0
  32. bottom_solid_layers = 3
  33. bridge_acceleration = 0
  34. bridge_flow_ratio = 1
  35. bridge_speed = 20
  36. brim_width = 0
  37. complete_objects = 0
  38. default_acceleration = 0
  39. dont_support_bridges = 1
  40. external_fill_pattern = rectilinear
  41. external_perimeter_extrusion_width = 0
  42. external_perimeter_speed = 80%
  43. external_perimeters_first = 0
  44. extra_perimeters = 1
  45. extruder_clearance_height = 20
  46. extruder_clearance_radius = 20
  47. extrusion_width = 0
  48. fill_angle = 45
  49. fill_density = 20%
  50. fill_pattern = honeycomb
  51. first_layer_acceleration = 0
  52. first_layer_extrusion_width = 120%
  53. first_layer_height = 0.3
  54. first_layer_speed = 10
  55. gap_fill_speed = 20
  56. gcode_comments = 0
  57. infill_acceleration = 0
  58. infill_every_layers = 1
  59. infill_extruder = 1
  60. infill_extrusion_width = 0
  61. infill_first = 0
  62. infill_only_where_needed = 0
  63. infill_overlap = 30%
  64. infill_speed = 15
  65. interface_shells = 0
  66. layer_height = 0.2
  67. max_print_speed = 20
  68. max_volumetric_speed = 0
  69. min_skirt_length = 0
  70. notes =
  71. only_retract_when_crossing_perimeters = 1
  72. ooze_prevention = 0
  73. output_filename_format = [input_filename_base].gcode
  74. overhangs = 1
  75. perimeter_acceleration = 0
  76. perimeter_extruder = 1
  77. perimeter_extrusion_width = 0
  78. perimeter_speed = 15
  79. perimeters = 3
  80. post_process =
  81. raft_layers = 0
  82. resolution = 0
  83. seam_position = aligned
  84. skirt_distance = 6
  85. skirt_height = 1
  86. skirts = 1
  87. small_perimeter_speed = 15
  88. solid_infill_below_area = 70
  89. solid_infill_every_layers = 0
  90. solid_infill_extruder = 1
  91. solid_infill_extrusion_width = 0
  92. solid_infill_speed = 20
  93. spiral_vase = 0
  94. standby_temperature_delta = -5
  95. support_material = 0
  96. support_material_angle = 0
  97. support_material_contact_distance = 0.2
  98. support_material_enforce_layers = 0
  99. support_material_extruder = 1
  100. support_material_extrusion_width = 0
  101. support_material_interface_extruder = 1
  102. support_material_interface_layers = 3
  103. support_material_interface_spacing = 0
  104. support_material_interface_speed = 100%
  105. support_material_pattern = pillars
  106. support_material_spacing = 2.5
  107. support_material_speed = 20
  108. support_material_threshold = 0
  109. thin_walls = 1
  110. threads = 4
  111. top_infill_extrusion_width = 0
  112. top_solid_infill_speed = 15
  113. top_solid_layers = 3
  114. travel_speed = 20
  115. xy_size_compensation = 0
  116. [print:Simple Mode]
  117. bottom_solid_layers = 3
  118. brim_width = 0
  119. dont_support_bridges = 1
  120. external_fill_pattern = rectilinear
  121. fill_density = 20%
  122. fill_pattern = honeycomb
  123. infill_speed = 15
  124. layer_height = 0.2
  125. perimeter_speed = 15
  126. perimeters = 3
  127. raft_layers = 0
  128. support_material = 0
  129. support_material_contact_distance = 0.2
  130. support_material_spacing = 2.5
  131. top_solid_layers = 3
  132. travel_speed = 15
  133. xy_size_compensation = 0
  134. [printer:Fabrikator Mini]
  135. bed_shape = 0x0,80x0,80x80,0x80
  136. before_layer_gcode =
  137. end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
  138. extruder_offset = 0x0
  139. gcode_flavor = reprap
  140. layer_gcode =
  141. nozzle_diameter = 0.4
  142. octoprint_apikey =
  143. octoprint_host =
  144. pressure_advance = 0
  145. retract_before_travel = 1.5
  146. retract_layer_change = 0
  147. retract_length = 4.5
  148. retract_length_toolchange = 10
  149. retract_lift = 0
  150. retract_restart_extra = 0
  151. retract_restart_extra_toolchange = 0
  152. retract_speed = 40
  153. start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
  154. toolchange_gcode =
  155. use_firmware_retraction = 0
  156. use_relative_e_distances = 0
  157. use_volumetric_e = 0
  158. vibration_limit = 0
  159. wipe = 0
  160. z_offset = 0
  161. [printer:Simple Mode]
  162. bed_shape = 0x0,80x0,80x80,0x80
  163. end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
  164. gcode_flavor = reprap
  165. nozzle_diameter = 0.4
  166. retract_length = 2
  167. retract_lift = 0
  168. start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
  169. wipe = 0
  170. z_offset = 0
  171. [settings]
  172. autocenter = 1
  173. mode = expert
  174. [simple]
  175. avoid_crossing_perimeters = 1
  176. bed_shape = 0x0,80x0,80x80,0x80
  177. bed_temperature = 0
  178. before_layer_gcode =
  179. bottom_solid_layers = 3
  180. bridge_acceleration = 0
  181. bridge_fan_speed = 100
  182. bridge_flow_ratio = 1
  183. bridge_speed = 60
  184. brim_width = 0
  185. complete_objects = 0
  186. cooling = 1
  187. default_acceleration = 0
  188. disable_fan_first_layers = 3
  189. dont_support_bridges = 1
  190. duplicate_distance = 6
  191. end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n
  192. external_fill_pattern = rectilinear
  193. external_perimeter_extrusion_width = 0
  194. external_perimeter_speed = 50%
  195. external_perimeters_first = 0
  196. extra_perimeters = 1
  197. extruder_clearance_height = 20
  198. extruder_clearance_radius = 20
  199. extruder_offset = 0x0
  200. extrusion_axis = E
  201. extrusion_multiplier = 1
  202. extrusion_width = 0
  203. fan_always_on = 0
  204. fan_below_layer_time = 60
  205. filament_colour = #FFFFFF
  206. filament_diameter = 1.75
  207. fill_angle = 45
  208. fill_density = 20%
  209. fill_pattern = honeycomb
  210. first_layer_acceleration = 0
  211. first_layer_bed_temperature = 0
  212. first_layer_extrusion_width = 200%
  213. first_layer_height = 0.4
  214. first_layer_speed = 30
  215. first_layer_temperature = 195
  216. gap_fill_speed = 20
  217. gcode_arcs = 0
  218. gcode_comments = 0
  219. gcode_flavor = reprap
  220. infill_acceleration = 0
  221. infill_every_layers = 10
  222. infill_extruder = 1
  223. infill_extrusion_width = 0
  224. infill_first = 0
  225. infill_only_where_needed = 0
  226. infill_overlap = 15%
  227. infill_speed = 15
  228. interface_shells = 0
  229. layer_gcode =
  230. layer_height = 0.2
  231. max_fan_speed = 100
  232. max_print_speed = 80
  233. max_volumetric_speed = 0
  234. min_fan_speed = 35
  235. min_print_speed = 10
  236. min_skirt_length = 0
  237. notes =
  238. nozzle_diameter = 0.4
  239. octoprint_apikey =
  240. octoprint_host =
  241. only_retract_when_crossing_perimeters = 1
  242. ooze_prevention = 0
  243. output_filename_format = [input_filename_base].gcode
  244. overhangs = 1
  245. perimeter_acceleration = 0
  246. perimeter_extruder = 1
  247. perimeter_extrusion_width = 0
  248. perimeter_speed = 15
  249. perimeters = 3
  250. post_process =
  251. pressure_advance = 0
  252. raft_layers = 0
  253. resolution = 0
  254. retract_before_travel = 2
  255. retract_layer_change = 0
  256. retract_length = 2
  257. retract_length_toolchange = 10
  258. retract_lift = 0
  259. retract_restart_extra = 0
  260. retract_restart_extra_toolchange = 0
  261. retract_speed = 40
  262. seam_position = aligned
  263. skirt_distance = 6
  264. skirt_height = 1
  265. skirts = 1
  266. slowdown_below_layer_time = 5
  267. small_perimeter_speed = 15
  268. solid_infill_below_area = 70
  269. solid_infill_every_layers = 0
  270. solid_infill_extruder = 1
  271. solid_infill_extrusion_width = 0
  272. solid_infill_speed = 20
  273. spiral_vase = 0
  274. standby_temperature_delta = -5
  275. start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
  276. support_material = 0
  277. support_material_angle = 0
  278. support_material_contact_distance = 0.2
  279. support_material_enforce_layers = 0
  280. support_material_extruder = 1
  281. support_material_extrusion_width = 0
  282. support_material_interface_extruder = 1
  283. support_material_interface_layers = 3
  284. support_material_interface_spacing = 0
  285. support_material_interface_speed = 100%
  286. support_material_pattern = pillars
  287. support_material_spacing = 2.5
  288. support_material_speed = 60
  289. support_material_threshold = 0
  290. temperature = 190
  291. thin_walls = 1
  292. threads = 2
  293. toolchange_gcode =
  294. top_infill_extrusion_width = 0
  295. top_solid_infill_speed = 15
  296. top_solid_layers = 3
  297. travel_speed = 15
  298. use_firmware_retraction = 0
  299. use_relative_e_distances = 0
  300. use_volumetric_e = 0
  301. vibration_limit = 0
  302. wipe = 0
  303. xy_size_compensation = 0
  304. z_offset = 0