My self-made 3D-printable designs, mainly in OpenSCAD
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

Abus.scad 1.6KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
  1. /*
  2. * Created by:
  3. * Thomas Buck <xythobuz@xythobuz.de> in May 2016
  4. *
  5. * Licensed under the Creative Commons - Attribution license.
  6. */
  7. // -----------------------------------------------------------
  8. hole_distance = 70;
  9. hole_size = 5;
  10. hook_width = 5;
  11. hook_length = 5;
  12. hook_height = 6.5;
  13. hook_strength = 2;
  14. hook_outer_distance = 71;
  15. hook_angle = 18;
  16. base_width = 78;
  17. base_depth = 10;
  18. base_height = 1;
  19. $fn = 15;
  20. // -----------------------------------------------------------
  21. module hook() {
  22. cube([hook_width, hook_strength, hook_height]);
  23. translate([0, 0, hook_height])
  24. cube([hook_width, hook_length, hook_strength]);
  25. }
  26. module hooks() {
  27. translate([(hook_outer_distance / 2) - hook_width, 0, 0])
  28. hook();
  29. translate([-(hook_outer_distance / 2) + hook_width, 0, 0])
  30. rotate([0, 0, 180])
  31. hook();
  32. }
  33. module base() {
  34. difference() {
  35. union() {
  36. cube([base_width, base_depth, base_height]);
  37. translate([0, base_depth, 0])
  38. cube([13, 8, base_height]);
  39. translate([base_width - 13, -base_depth + 2, 0])
  40. cube([13, 8, base_height]);
  41. }
  42. translate([(base_width - hole_distance) / 2, base_depth / 2, -1])
  43. cylinder(d = hole_size, h = base_height + 2);
  44. translate([(base_width + hole_distance) / 2, base_depth / 2, -1])
  45. cylinder(d = hole_size, h = base_height + 2);
  46. }
  47. }
  48. // -----------------------------------------------------------
  49. translate([-base_width / 2, -base_depth / 2, 0])
  50. base();
  51. translate([0, 0, base_height])
  52. rotate([0, 0, -hook_angle])
  53. hooks();