My self-made 3D-printable designs, mainly in OpenSCAD
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.

Cura_CTC_i3_Pro_B.ini 11KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262
  1. [profile]
  2. layer_height = 0.2
  3. wall_thickness = 0.8
  4. retraction_enable = True
  5. solid_layer_thickness = 0.8
  6. fill_density = 40
  7. print_speed = 60
  8. print_temperature = 195
  9. print_temperature2 = 0
  10. print_temperature3 = 0
  11. print_temperature4 = 0
  12. print_temperature5 = 0
  13. print_bed_temperature = 60
  14. support = Everywhere
  15. platform_adhesion = None
  16. support_dual_extrusion = Both
  17. wipe_tower = False
  18. wipe_tower_volume = 15
  19. ooze_shield = False
  20. filament_diameter = 1.75
  21. filament_diameter2 = 0
  22. filament_diameter3 = 0
  23. filament_diameter4 = 0
  24. filament_diameter5 = 0
  25. filament_flow = 100.0
  26. nozzle_size = 0.4
  27. retraction_speed = 40.0
  28. retraction_amount = 1.2
  29. retraction_dual_amount = 16.5
  30. retraction_min_travel = 1.5
  31. retraction_combing = All
  32. retraction_minimal_extrusion = 0.02
  33. retraction_hop = 0.08
  34. bottom_thickness = 0.3
  35. layer0_width_factor = 110
  36. object_sink = 0.0
  37. overlap_dual = 0.15
  38. travel_speed = 150
  39. bottom_layer_speed = 50.0
  40. infill_speed = 0.0
  41. solidarea_speed = 0.0
  42. inset0_speed = 0.0
  43. insetx_speed = 0.0
  44. cool_min_layer_time = 10
  45. fan_enabled = True
  46. skirt_line_count = 3
  47. skirt_gap = 3.0
  48. skirt_minimal_length = 150.0
  49. fan_full_height = 1.5
  50. fan_speed = 30
  51. fan_speed_max = 100
  52. cool_min_feedrate = 10
  53. cool_head_lift = False
  54. solid_top = True
  55. solid_bottom = True
  56. fill_overlap = 15
  57. perimeter_before_infill = False
  58. support_type = Lines
  59. support_angle = 60
  60. support_fill_rate = 15
  61. support_xy_distance = 0.7
  62. support_z_distance = 0.15
  63. spiralize = False
  64. simple_mode = False
  65. brim_line_count = 20
  66. raft_margin = 5.0
  67. raft_line_spacing = 3.0
  68. raft_base_thickness = 0.3
  69. raft_base_linewidth = 1.0
  70. raft_interface_thickness = 0.27
  71. raft_interface_linewidth = 0.4
  72. raft_airgap_all = 0.0
  73. raft_airgap = 0.22
  74. raft_surface_layers = 2
  75. raft_surface_thickness = 0.27
  76. raft_surface_linewidth = 0.4
  77. fix_horrible_union_all_type_a = True
  78. fix_horrible_union_all_type_b = False
  79. fix_horrible_use_open_bits = False
  80. fix_horrible_extensive_stitching = False
  81. plugin_config =
  82. object_center_x = -1
  83. object_center_y = -1
  84. [alterations]
  85. start.gcode = ;Sliced at: {day} {date} {time}
  86. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  87. ;Print time: {print_time}
  88. ;Filament used: {filament_amount}m {filament_weight}g
  89. ;Filament cost: {filament_cost}
  90. M140 S{print_bed_temperature} ;Heat Print bed and don't wait
  91. M104 S{print_temperature} ;Heat extruder and don't wait
  92. G21 ;metric values
  93. G90 ;absolute positioning
  94. M82 ;set extruder to absolute mode
  95. M107 ;start with the fan off
  96. G28 X0 Y0 ;move X/Y to min endstops
  97. G28 Z0 ;move Z to min endstops
  98. M190 S{print_bed_temperature} ;Heat Print bed and wait
  99. M109 S{print_temperature} ;Heat extruder and wait
  100. G1 Z5.0 F{travel_speed} ;move the platform down 5mm
  101. G1 X10.0 Y10.0 F{travel_speed} ;move to X10 Y10
  102. G1 Z0.15 F{travel_speed} ;move Z to first layer height
  103. G92 E0 ;zero the extruded length
  104. G1 X30.0 E3 F300 ;extrude 3mm of feed stock and move X 20mm
  105. G92 E0 ;zero the extruded length again
  106. G1 Z10.0 F{travel_speed} ;move platform down 5mm more
  107. G1 F{travel_speed}
  108. ;Put printing message on LCD screen
  109. M117 Printing...
  110. end.gcode = M104 S0
  111. M140 S0 ;heated bed heater off (if you have it)
  112. G91 ;relative positioning
  113. G1 E-1 F40 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  114. G1 Z+0.5 E-0.5 F{travel_speed} ;move Z up a bit and retract filament even more
  115. G90 ;absolute positioning
  116. G1 X0 Y180 F{travel_speed} ;move X to min endstops, y to max so the head is out of the way
  117. M84 ;steppers off
  118. M117 Finished!
  119. start2.gcode = ;Sliced at: {day} {date} {time}
  120. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  121. ;Print time: {print_time}
  122. ;Filament used: {filament_amount}m {filament_weight}g
  123. ;Filament cost: {filament_cost}
  124. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  125. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  126. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  127. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  128. G21 ;metric values
  129. G90 ;absolute positioning
  130. M107 ;start with the fan off
  131. G28 X0 Y0 ;move X/Y to min endstops
  132. G28 Z0 ;move Z to min endstops
  133. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  134. T1 ;Switch to the 2nd extruder
  135. G92 E0 ;zero the extruded length
  136. G1 F200 E10 ;extrude 10mm of feed stock
  137. G92 E0 ;zero the extruded length again
  138. G1 F200 E-{retraction_dual_amount}
  139. T0 ;Switch to the first extruder
  140. G92 E0 ;zero the extruded length
  141. G1 F200 E10 ;extrude 10mm of feed stock
  142. G92 E0 ;zero the extruded length again
  143. G1 F{travel_speed}
  144. ;Put printing message on LCD screen
  145. M117 Printing...
  146. end2.gcode = ;End GCode
  147. M104 T0 S0 ;extruder heater off
  148. M104 T1 S0 ;extruder heater off
  149. M140 S0 ;heated bed heater off (if you have it)
  150. G91 ;relative positioning
  151. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  152. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  153. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  154. M84 ;steppers off
  155. G90 ;absolute positioning
  156. ;{profile_string}
  157. start3.gcode = ;Sliced at: {day} {date} {time}
  158. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  159. ;Print time: {print_time}
  160. ;Filament used: {filament_amount}m {filament_weight}g
  161. ;Filament cost: {filament_cost}
  162. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  163. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  164. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  165. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  166. G21 ;metric values
  167. G90 ;absolute positioning
  168. M107 ;start with the fan off
  169. G28 X0 Y0 ;move X/Y to min endstops
  170. G28 Z0 ;move Z to min endstops
  171. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  172. T2 ;Switch to the 3rd extruder
  173. G92 E0 ;zero the extruded length
  174. G1 F200 E10 ;extrude 10mm of feed stock
  175. G92 E0 ;zero the extruded length again
  176. G1 F200 E-{retraction_dual_amount}
  177. T1 ;Switch to the 2nd extruder
  178. G92 E0 ;zero the extruded length
  179. G1 F200 E10 ;extrude 10mm of feed stock
  180. G92 E0 ;zero the extruded length again
  181. G1 F200 E-{retraction_dual_amount}
  182. T0 ;Switch to the first extruder
  183. G92 E0 ;zero the extruded length
  184. G1 F200 E10 ;extrude 10mm of feed stock
  185. G92 E0 ;zero the extruded length again
  186. G1 F{travel_speed}
  187. ;Put printing message on LCD screen
  188. M117 Printing...
  189. end3.gcode = ;End GCode
  190. M104 T0 S0 ;extruder heater off
  191. M104 T1 S0 ;extruder heater off
  192. M104 T2 S0 ;extruder heater off
  193. M140 S0 ;heated bed heater off (if you have it)
  194. G91 ;relative positioning
  195. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  196. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  197. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  198. M84 ;steppers off
  199. G90 ;absolute positioning
  200. ;{profile_string}
  201. start4.gcode = ;Sliced at: {day} {date} {time}
  202. ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
  203. ;Print time: {print_time}
  204. ;Filament used: {filament_amount}m {filament_weight}g
  205. ;Filament cost: {filament_cost}
  206. ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
  207. ;M104 S{print_temperature} ;Uncomment to add your own temperature line
  208. ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line
  209. ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line
  210. ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line
  211. G21 ;metric values
  212. G90 ;absolute positioning
  213. M107 ;start with the fan off
  214. G28 X0 Y0 ;move X/Y to min endstops
  215. G28 Z0 ;move Z to min endstops
  216. G1 Z15.0 F{travel_speed} ;move the platform down 15mm
  217. T3 ;Switch to the 4th extruder
  218. G92 E0 ;zero the extruded length
  219. G1 F200 E10 ;extrude 10mm of feed stock
  220. G92 E0 ;zero the extruded length again
  221. G1 F200 E-{retraction_dual_amount}
  222. T2 ;Switch to the 3rd extruder
  223. G92 E0 ;zero the extruded length
  224. G1 F200 E10 ;extrude 10mm of feed stock
  225. G92 E0 ;zero the extruded length again
  226. G1 F200 E-{retraction_dual_amount}
  227. T1 ;Switch to the 2nd extruder
  228. G92 E0 ;zero the extruded length
  229. G1 F200 E10 ;extrude 10mm of feed stock
  230. G92 E0 ;zero the extruded length again
  231. G1 F200 E-{retraction_dual_amount}
  232. T0 ;Switch to the first extruder
  233. G92 E0 ;zero the extruded length
  234. G1 F200 E10 ;extrude 10mm of feed stock
  235. G92 E0 ;zero the extruded length again
  236. G1 F{travel_speed}
  237. ;Put printing message on LCD screen
  238. M117 Printing...
  239. end4.gcode = ;End GCode
  240. M104 T0 S0 ;extruder heater off
  241. M104 T1 S0 ;extruder heater off
  242. M104 T2 S0 ;extruder heater off
  243. M104 T3 S0 ;extruder heater off
  244. M140 S0 ;heated bed heater off (if you have it)
  245. G91 ;relative positioning
  246. G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
  247. G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
  248. G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
  249. M84 ;steppers off
  250. G90 ;absolute positioning
  251. ;{profile_string}
  252. support_start.gcode =
  253. support_end.gcode =
  254. cool_start.gcode =
  255. cool_end.gcode =
  256. replace.csv =
  257. preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
  258. ;This code is added before the T(n)
  259. postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders.
  260. ;This code is added after the T(n)