My self-made 3D-printable designs, mainly in OpenSCAD
您最多选择25个主题 主题必须以字母或数字开头,可以包含连字符 (-),并且长度不得超过35个字符

threads.scad 15KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374
  1. /*
  2. * ISO-standard metric threads, following this specification:
  3. * http://en.wikipedia.org/wiki/ISO_metric_screw_thread
  4. *
  5. * Copyright 2017 Dan Kirshner - dan_kirshner@yahoo.com
  6. * This program is free software: you can redistribute it and/or modify
  7. * it under the terms of the GNU General Public License as published by
  8. * the Free Software Foundation, either version 3 of the License, or
  9. * (at your option) any later version.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * See <http://www.gnu.org/licenses/>.
  17. *
  18. * Version 2.3. 2017-08-31 Default for leadin: 0 (best for internal threads).
  19. * Version 2.2. 2017-01-01 Correction for angle; leadfac option. (Thanks to
  20. * Andrew Allen <a2intl@gmail.com>.)
  21. * Version 2.1. 2016-12-04 Chamfer bottom end (low-z); leadin option.
  22. * Version 2.0. 2016-11-05 Backwards compatibility (earlier OpenSCAD) fixes.
  23. * Version 1.9. 2016-07-03 Option: tapered.
  24. * Version 1.8. 2016-01-08 Option: (non-standard) angle.
  25. * Version 1.7. 2015-11-28 Larger x-increment - for small-diameters.
  26. * Version 1.6. 2015-09-01 Options: square threads, rectangular threads.
  27. * Version 1.5. 2015-06-12 Options: thread_size, groove.
  28. * Version 1.4. 2014-10-17 Use "faces" instead of "triangles" for polyhedron
  29. * Version 1.3. 2013-12-01 Correct loop over turns -- don't have early cut-off
  30. * Version 1.2. 2012-09-09 Use discrete polyhedra rather than linear_extrude ()
  31. * Version 1.1. 2012-09-07 Corrected to right-hand threads!
  32. */
  33. // Examples.
  34. //
  35. // Standard M8 x 1.
  36. // metric_thread (diameter=8, pitch=1, length=4);
  37. // Square thread.
  38. // metric_thread (diameter=8, pitch=1, length=4, square=true);
  39. // Non-standard: long pitch, same thread size.
  40. //metric_thread (diameter=8, pitch=4, length=4, thread_size=1, groove=true);
  41. // Non-standard: 20 mm diameter, long pitch, square "trough" width 3 mm,
  42. // depth 1 mm.
  43. //metric_thread (diameter=20, pitch=8, length=16, square=true, thread_size=6,
  44. // groove=true, rectangle=0.333);
  45. // English: 1/4 x 20.
  46. //english_thread (diameter=1/4, threads_per_inch=20, length=1);
  47. // Tapered. Example -- pipe size 3/4" -- per:
  48. // http://www.engineeringtoolbox.com/npt-national-pipe-taper-threads-d_750.html
  49. // english_thread (diameter=1.05, threads_per_inch=14, length=3/4, taper=1/16);
  50. // Thread for mounting on Rohloff hub.
  51. //difference () {
  52. // cylinder (r=20, h=10, $fn=100);
  53. //
  54. // metric_thread (diameter=34, pitch=1, length=10, internal=true, n_starts=6);
  55. //}
  56. // ----------------------------------------------------------------------------
  57. function segments (diameter) = min (50, ceil (diameter*6));
  58. // ----------------------------------------------------------------------------
  59. // diameter - outside diameter of threads in mm. Default: 8.
  60. // pitch - thread axial "travel" per turn in mm. Default: 1.
  61. // length - overall axial length of thread in mm. Default: 1.
  62. // internal - true = clearances for internal thread (e.g., a nut).
  63. // false = clearances for external thread (e.g., a bolt).
  64. // (Internal threads should be "cut out" from a solid using
  65. // difference ()).
  66. // n_starts - Number of thread starts (e.g., DNA, a "double helix," has
  67. // n_starts=2). See wikipedia Screw_thread.
  68. // thread_size - (non-standard) axial width of a single thread "V" - independent
  69. // of pitch. Default: same as pitch.
  70. // groove - (non-standard) subtract inverted "V" from cylinder (rather than
  71. // add protruding "V" to cylinder).
  72. // square - Square threads (per
  73. // https://en.wikipedia.org/wiki/Square_thread_form).
  74. // rectangle - (non-standard) "Rectangular" thread - ratio depth/(axial) width
  75. // Default: 1 (square).
  76. // angle - (non-standard) angle (deg) of thread side from perpendicular to
  77. // axis (default = standard = 30 degrees).
  78. // taper - diameter change per length (National Pipe Thread/ANSI B1.20.1
  79. // is 1" diameter per 16" length). Taper decreases from 'diameter'
  80. // as z increases.
  81. // leadin - 0 (default): no chamfer; 1: chamfer (45 degree) at max-z end;
  82. // 2: chamfer at both ends, 3: chamfer at z=0 end.
  83. // leadfac - scale of leadin chamfer (default: 1.0 = 1/2 thread).
  84. module metric_thread (diameter=8, pitch=1, length=1, internal=false, n_starts=1,
  85. thread_size=-1, groove=false, square=false, rectangle=0,
  86. angle=30, taper=0, leadin=0, leadfac=1.0)
  87. {
  88. // thread_size: size of thread "V" different than travel per turn (pitch).
  89. // Default: same as pitch.
  90. local_thread_size = thread_size == -1 ? pitch : thread_size;
  91. local_rectangle = rectangle ? rectangle : 1;
  92. n_segments = segments (diameter);
  93. h = (square || rectangle) ? local_thread_size*local_rectangle/2 : local_thread_size / (2 * tan(angle));
  94. h_fac1 = (square || rectangle) ? 0.90 : 0.625;
  95. // External thread includes additional relief.
  96. h_fac2 = (square || rectangle) ? 0.95 : 5.3/8;
  97. tapered_diameter = diameter - length*taper;
  98. difference () {
  99. union () {
  100. if (! groove) {
  101. metric_thread_turns (diameter, pitch, length, internal, n_starts,
  102. local_thread_size, groove, square, rectangle, angle,
  103. taper);
  104. }
  105. difference () {
  106. // Solid center, including Dmin truncation.
  107. if (groove) {
  108. cylinder (r1=diameter/2, r2=tapered_diameter/2,
  109. h=length, $fn=n_segments);
  110. } else if (internal) {
  111. cylinder (r1=diameter/2 - h*h_fac1, r2=tapered_diameter/2 - h*h_fac1,
  112. h=length, $fn=n_segments);
  113. } else {
  114. // External thread.
  115. cylinder (r1=diameter/2 - h*h_fac2, r2=tapered_diameter/2 - h*h_fac2,
  116. h=length, $fn=n_segments);
  117. }
  118. if (groove) {
  119. metric_thread_turns (diameter, pitch, length, internal, n_starts,
  120. local_thread_size, groove, square, rectangle,
  121. angle, taper);
  122. }
  123. }
  124. }
  125. // chamfer z=0 end if leadin is 2 or 3
  126. if (leadin == 2 || leadin == 3) {
  127. difference () {
  128. cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
  129. cylinder (r2=diameter/2, r1=diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
  130. $fn=n_segments);
  131. }
  132. }
  133. // chamfer z-max end if leadin is 1 or 2.
  134. if (leadin == 1 || leadin == 2) {
  135. translate ([0, 0, length + 0.05 - h*h_fac1*leadfac]) {
  136. difference () {
  137. cylinder (r=diameter/2 + 1, h=h*h_fac1*leadfac, $fn=n_segments);
  138. cylinder (r1=tapered_diameter/2, r2=tapered_diameter/2 - h*h_fac1*leadfac, h=h*h_fac1*leadfac,
  139. $fn=n_segments);
  140. }
  141. }
  142. }
  143. }
  144. }
  145. // ----------------------------------------------------------------------------
  146. // Input units in inches.
  147. // Note: units of measure in drawing are mm!
  148. module english_thread (diameter=0.25, threads_per_inch=20, length=1,
  149. internal=false, n_starts=1, thread_size=-1, groove=false,
  150. square=false, rectangle=0, angle=30, taper=0, leadin=0,
  151. leadfac=1.0)
  152. {
  153. // Convert to mm.
  154. mm_diameter = diameter*25.4;
  155. mm_pitch = (1.0/threads_per_inch)*25.4;
  156. mm_length = length*25.4;
  157. echo (str ("mm_diameter: ", mm_diameter));
  158. echo (str ("mm_pitch: ", mm_pitch));
  159. echo (str ("mm_length: ", mm_length));
  160. metric_thread (mm_diameter, mm_pitch, mm_length, internal, n_starts,
  161. thread_size, groove, square, rectangle, angle, taper, leadin,
  162. leadfac);
  163. }
  164. // ----------------------------------------------------------------------------
  165. module metric_thread_turns (diameter, pitch, length, internal, n_starts,
  166. thread_size, groove, square, rectangle, angle,
  167. taper)
  168. {
  169. // Number of turns needed.
  170. n_turns = floor (length/pitch);
  171. intersection () {
  172. // Start one below z = 0. Gives an extra turn at each end.
  173. for (i=[-1*n_starts : n_turns+1]) {
  174. translate ([0, 0, i*pitch]) {
  175. metric_thread_turn (diameter, pitch, internal, n_starts,
  176. thread_size, groove, square, rectangle, angle,
  177. taper, i*pitch);
  178. }
  179. }
  180. // Cut to length.
  181. translate ([0, 0, length/2]) {
  182. cube ([diameter*3, diameter*3, length], center=true);
  183. }
  184. }
  185. }
  186. // ----------------------------------------------------------------------------
  187. module metric_thread_turn (diameter, pitch, internal, n_starts, thread_size,
  188. groove, square, rectangle, angle, taper, z)
  189. {
  190. n_segments = segments (diameter);
  191. fraction_circle = 1.0/n_segments;
  192. for (i=[0 : n_segments-1]) {
  193. rotate ([0, 0, i*360*fraction_circle]) {
  194. translate ([0, 0, i*n_starts*pitch*fraction_circle]) {
  195. //current_diameter = diameter - taper*(z + i*n_starts*pitch*fraction_circle);
  196. thread_polyhedron ((diameter - taper*(z + i*n_starts*pitch*fraction_circle))/2,
  197. pitch, internal, n_starts, thread_size, groove,
  198. square, rectangle, angle);
  199. }
  200. }
  201. }
  202. }
  203. // ----------------------------------------------------------------------------
  204. module thread_polyhedron (radius, pitch, internal, n_starts, thread_size,
  205. groove, square, rectangle, angle)
  206. {
  207. n_segments = segments (radius*2);
  208. fraction_circle = 1.0/n_segments;
  209. local_rectangle = rectangle ? rectangle : 1;
  210. h = (square || rectangle) ? thread_size*local_rectangle/2 : thread_size / (2 * tan(angle));
  211. outer_r = radius + (internal ? h/20 : 0); // Adds internal relief.
  212. //echo (str ("outer_r: ", outer_r));
  213. // A little extra on square thread -- make sure overlaps cylinder.
  214. h_fac1 = (square || rectangle) ? 1.1 : 0.875;
  215. inner_r = radius - h*h_fac1; // Does NOT do Dmin_truncation - do later with
  216. // cylinder.
  217. translate_y = groove ? outer_r + inner_r : 0;
  218. reflect_x = groove ? 1 : 0;
  219. // Make these just slightly bigger (keep in proportion) so polyhedra will
  220. // overlap.
  221. x_incr_outer = (! groove ? outer_r : inner_r) * fraction_circle * 2 * PI * 1.02;
  222. x_incr_inner = (! groove ? inner_r : outer_r) * fraction_circle * 2 * PI * 1.02;
  223. z_incr = n_starts * pitch * fraction_circle * 1.005;
  224. /*
  225. (angles x0 and x3 inner are actually 60 deg)
  226. /\ (x2_inner, z2_inner) [2]
  227. / \
  228. (x3_inner, z3_inner) / \
  229. [3] \ \
  230. |\ \ (x2_outer, z2_outer) [6]
  231. | \ /
  232. | \ /|
  233. z |[7]\/ / (x1_outer, z1_outer) [5]
  234. | | | /
  235. | x | |/
  236. | / | / (x0_outer, z0_outer) [4]
  237. | / | / (behind: (x1_inner, z1_inner) [1]
  238. |/ | /
  239. y________| |/
  240. (r) / (x0_inner, z0_inner) [0]
  241. */
  242. x1_outer = outer_r * fraction_circle * 2 * PI;
  243. z0_outer = (outer_r - inner_r) * tan(angle);
  244. //echo (str ("z0_outer: ", z0_outer));
  245. //polygon ([[inner_r, 0], [outer_r, z0_outer],
  246. // [outer_r, 0.5*pitch], [inner_r, 0.5*pitch]]);
  247. z1_outer = z0_outer + z_incr;
  248. // Give internal square threads some clearance in the z direction, too.
  249. bottom = internal ? 0.235 : 0.25;
  250. top = internal ? 0.765 : 0.75;
  251. translate ([0, translate_y, 0]) {
  252. mirror ([reflect_x, 0, 0]) {
  253. if (square || rectangle) {
  254. // Rule for face ordering: look at polyhedron from outside: points must
  255. // be in clockwise order.
  256. polyhedron (
  257. points = [
  258. [-x_incr_inner/2, -inner_r, bottom*thread_size], // [0]
  259. [x_incr_inner/2, -inner_r, bottom*thread_size + z_incr], // [1]
  260. [x_incr_inner/2, -inner_r, top*thread_size + z_incr], // [2]
  261. [-x_incr_inner/2, -inner_r, top*thread_size], // [3]
  262. [-x_incr_outer/2, -outer_r, bottom*thread_size], // [4]
  263. [x_incr_outer/2, -outer_r, bottom*thread_size + z_incr], // [5]
  264. [x_incr_outer/2, -outer_r, top*thread_size + z_incr], // [6]
  265. [-x_incr_outer/2, -outer_r, top*thread_size] // [7]
  266. ],
  267. faces = [
  268. [0, 3, 7, 4], // This-side trapezoid
  269. [1, 5, 6, 2], // Back-side trapezoid
  270. [0, 1, 2, 3], // Inner rectangle
  271. [4, 7, 6, 5], // Outer rectangle
  272. // These are not planar, so do with separate triangles.
  273. [7, 2, 6], // Upper rectangle, bottom
  274. [7, 3, 2], // Upper rectangle, top
  275. [0, 5, 1], // Lower rectangle, bottom
  276. [0, 4, 5] // Lower rectangle, top
  277. ]
  278. );
  279. } else {
  280. // Rule for face ordering: look at polyhedron from outside: points must
  281. // be in clockwise order.
  282. polyhedron (
  283. points = [
  284. [-x_incr_inner/2, -inner_r, 0], // [0]
  285. [x_incr_inner/2, -inner_r, z_incr], // [1]
  286. [x_incr_inner/2, -inner_r, thread_size + z_incr], // [2]
  287. [-x_incr_inner/2, -inner_r, thread_size], // [3]
  288. [-x_incr_outer/2, -outer_r, z0_outer], // [4]
  289. [x_incr_outer/2, -outer_r, z0_outer + z_incr], // [5]
  290. [x_incr_outer/2, -outer_r, thread_size - z0_outer + z_incr], // [6]
  291. [-x_incr_outer/2, -outer_r, thread_size - z0_outer] // [7]
  292. ],
  293. faces = [
  294. [0, 3, 7, 4], // This-side trapezoid
  295. [1, 5, 6, 2], // Back-side trapezoid
  296. [0, 1, 2, 3], // Inner rectangle
  297. [4, 7, 6, 5], // Outer rectangle
  298. // These are not planar, so do with separate triangles.
  299. [7, 2, 6], // Upper rectangle, bottom
  300. [7, 3, 2], // Upper rectangle, top
  301. [0, 5, 1], // Lower rectangle, bottom
  302. [0, 4, 5] // Lower rectangle, top
  303. ]
  304. );
  305. }
  306. }
  307. }
  308. }