My self-made 3D-printable designs, mainly in OpenSCAD
選択できるのは25トピックまでです。 トピックは、先頭が英数字で、英数字とダッシュ('-')を使用した35文字以内のものにしてください。

slic3r-ctc-i3-flexismart.ini 3.7KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120
  1. # generated by Slic3r 1.1.7 on Sat Mar 17 19:03:41 2018
  2. avoid_crossing_perimeters = 1
  3. bed_size = 195,183
  4. bed_temperature = 30
  5. bottom_solid_layers = 4
  6. bridge_acceleration = 0
  7. bridge_fan_speed = 100
  8. bridge_flow_ratio = 1
  9. bridge_speed = 60
  10. brim_width = 0
  11. complete_objects = 0
  12. cooling = 1
  13. default_acceleration = 0
  14. disable_fan_first_layers = 1
  15. dont_support_bridges = 1
  16. duplicate_distance = 6
  17. end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nG91 ; relative positioning\nG1 E-0.5 F40 ; retract some filament\nG1 Z+2.0 E-0.5 F4000 ; move z up and retract more\nG90 ; absolute positioning\nG0 X0 Y180 ; move out of the way\nM84 ; disable motors\nM117 Finished!\n
  18. external_perimeter_speed = 70%
  19. external_perimeters_first = 0
  20. extra_perimeters = 1
  21. extruder_clearance_height = 20
  22. extruder_clearance_radius = 20
  23. extruder_offset = 0x0
  24. extrusion_axis = E
  25. extrusion_multiplier = 1
  26. extrusion_width = 0
  27. fan_always_on = 0
  28. fan_below_layer_time = 60
  29. filament_diameter = 1.75
  30. fill_angle = 45
  31. fill_density = 15%
  32. fill_pattern = honeycomb
  33. first_layer_acceleration = 0
  34. first_layer_bed_temperature = 35
  35. first_layer_extrusion_width = 200%
  36. first_layer_height = 150%
  37. first_layer_speed = 30%
  38. first_layer_temperature = 195
  39. g0 = 0
  40. gap_fill_speed = 20
  41. gcode_arcs = 0
  42. gcode_comments = 0
  43. gcode_flavor = reprap
  44. infill_acceleration = 0
  45. infill_every_layers = 1
  46. infill_extruder = 1
  47. infill_extrusion_width = 0
  48. infill_first = 0
  49. infill_only_where_needed = 0
  50. infill_speed = 60
  51. interface_shells = 0
  52. layer_gcode =
  53. layer_height = 0.2
  54. max_fan_speed = 100
  55. min_fan_speed = 35
  56. min_print_speed = 15
  57. min_skirt_length = 10
  58. notes =
  59. nozzle_diameter = 0.4
  60. only_retract_when_crossing_perimeters = 1
  61. ooze_prevention = 0
  62. output_filename_format = [input_filename_base].gcode
  63. overhangs = 1
  64. perimeter_acceleration = 0
  65. perimeter_extruder = 1
  66. perimeter_extrusion_width = 0
  67. perimeter_speed = 50
  68. perimeters = 4
  69. post_process =
  70. print_center = 97.5,91.5
  71. raft_layers = 0
  72. resolution = 0
  73. retract_before_travel = 2
  74. retract_layer_change = 0
  75. retract_length = 1
  76. retract_length_toolchange = 2
  77. retract_lift = 0.18
  78. retract_restart_extra = 0
  79. retract_restart_extra_toolchange = 0
  80. retract_speed = 40
  81. seam_position = nearest
  82. skirt_distance = 2
  83. skirt_height = 1
  84. skirts = 3
  85. slowdown_below_layer_time = 10
  86. small_perimeter_speed = 30
  87. solid_fill_pattern = rectilinear
  88. solid_infill_below_area = 70
  89. solid_infill_every_layers = 0
  90. solid_infill_extrusion_width = 0
  91. solid_infill_speed = 60
  92. spiral_vase = 0
  93. standby_temperature_delta = -5
  94. start_gcode = M140 S[first_layer_bed_temperature] ; start heating bed\nG21 ; metric\nG90 ; absolute positioning\nM82 ; extruder absolute\nM107 ; fan off\nG28 ; home all axes\nG29 ; perform auto bed leveling\nM104 S[first_layer_temperature_0] ; start heating extruder\nG0 X10 Y10 F4000 ; move to xy origin\nM190 S[first_layer_bed_temperature] ; wait for heating bed\nM109 S[first_layer_temperature_0] ; wait for heating extruder\nG0 Z0.2 ; move z down\nG92 E0 ; zero extruder\nG1 X40 E3 F1000 ; print a line\nG1 E-2 ; retract\nG92 E0 ; zero extruder\nG0 Z10 F4000 ; lift nozzle\nG0 X97 Y91 ; move to center\nM117 Printing...\n
  95. support_material = 0
  96. support_material_angle = 0
  97. support_material_enforce_layers = 0
  98. support_material_extruder = 1
  99. support_material_extrusion_width = 0
  100. support_material_interface_extruder = 1
  101. support_material_interface_layers = 3
  102. support_material_interface_spacing = 0
  103. support_material_interface_speed = 100%
  104. support_material_pattern = pillars
  105. support_material_spacing = 2.5
  106. support_material_speed = 60
  107. support_material_threshold = 0
  108. temperature = 195
  109. thin_walls = 1
  110. threads = 2
  111. toolchange_gcode =
  112. top_infill_extrusion_width = 120%
  113. top_solid_infill_speed = 50
  114. top_solid_layers = 4
  115. travel_speed = 100
  116. use_firmware_retraction = 0
  117. use_relative_e_distances = 0
  118. vibration_limit = 0
  119. wipe = 0
  120. z_offset = 0