Simple single-color 8x8x8 LED Cube with AVRs
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

twislave.c 2.5KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192
  1. /*
  2. * twislave.c
  3. *
  4. * Copyright 2011 Thomas Buck <xythobuz@me.com>
  5. * Copyright 2011 Max Nuding <max.nuding@gmail.com>
  6. * Copyright 2011 Felix Bäder <baeder.felix@gmail.com>
  7. *
  8. * This file is part of LED-Cube.
  9. *
  10. * LED-Cube is free software: you can redistribute it and/or modify
  11. * it under the terms of the GNU General Public License as published by
  12. * the Free Software Foundation, either version 3 of the License, or
  13. * (at your option) any later version.
  14. *
  15. * LED-Cube is distributed in the hope that it will be useful,
  16. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  18. * GNU General Public License for more details.
  19. *
  20. * You should have received a copy of the GNU General Public License
  21. * along with LED-Cube. If not, see <http://www.gnu.org/licenses/>.
  22. */
  23. #include <avr/io.h>
  24. #include <avr/interrupt.h>
  25. #include <stdint.h>
  26. uint8_t data[7] = { 0x42, 0x42, 0x42, 0x42, 0x42, 0x42, 0x42 };
  27. uint8_t dataSent = 0;
  28. ISR(TWI_vect) {
  29. static uint8_t dataPos = 0;
  30. switch (TWSR & ~(7)) {
  31. case 0xB0: case 0xA8: // We've been called
  32. dataPos = 1; // Prepare next position
  33. TWDR = data[0]; // Transmit first byte
  34. TWCR |= (1 << TWEA); // More follows
  35. dataSent = 0;
  36. break;
  37. case 0xB8: // We're doing fine
  38. if (dataPos >= 6) {
  39. // whoops, this shouldn't happen
  40. // we transmit the last byte again and stop as if nothing happened
  41. // we do this also if we reached the last byte
  42. dataPos = 0;
  43. TWDR = data[6];
  44. TWCR &= ~(1 << TWEA); // Nothing follows
  45. dataSent = 1;
  46. } else {
  47. TWDR = data[dataPos++]; // Transmit next byte
  48. TWCR |= (1 << TWEA); // More follows
  49. dataSent = 0;
  50. }
  51. break;
  52. case 0xC0: case 0xC8: // We're done
  53. TWCR |= (1 << TWEA);
  54. dataSent = 1;
  55. break;
  56. }
  57. TWCR |= (1 << TWINT); // Continue with bus operation
  58. }
  59. void twiInit(uint8_t address) {
  60. if (address == 0) { // set slave address
  61. TWAR = 1;
  62. } else {
  63. TWAR = address & ~(1);
  64. }
  65. TWCR = (1 << TWEN) | (1 << TWEA) | (1 << TWIE); // Enable twi, interrupt and acknowledge bit
  66. sei(); // Enable interrupts
  67. }
  68. void twiSetDataToSend(uint8_t *d) { // 7 bytes
  69. // We don't care if it interrupts while we update the data.
  70. // It will cause a single faulty frame. This will not be visible while showing many
  71. // readouts in a short time.
  72. uint8_t i;
  73. for (i = 0; i < 7; i++) {
  74. data[i] = d[i];
  75. }
  76. }
  77. uint8_t twiDataWasSent(void) {
  78. if (dataSent != 0) {
  79. dataSent = 0;
  80. return 1;
  81. } else {
  82. return 0;
  83. }
  84. }