Simple single-color 8x8x8 LED Cube with AVRs
Vous ne pouvez pas sélectionner plus de 25 sujets Les noms de sujets doivent commencer par une lettre ou un nombre, peuvent contenir des tirets ('-') et peuvent comporter jusqu'à 35 caractères.

makefile 11KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423
  1. # Makefile
  2. #
  3. # On command line:
  4. #
  5. # make all = Make software.
  6. #
  7. # make clean = Clean out built project files.
  8. #
  9. # make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
  10. #
  11. # make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
  12. # 4.07 or greater).
  13. #
  14. # make program = Download the hex file to the device, using avrdude. Please
  15. # customize the avrdude settings below first!
  16. #
  17. # make filename.s = Just compile filename.c into the assembler code only
  18. #
  19. # To rebuild project do "make clean" then "make all".
  20. #
  21. #CDEFS = -D DEBUG
  22. # MCU name
  23. MCU = atmega32
  24. # Main Oscillator Frequency
  25. # This is only used to define F_OSC in all assembler and c-sources.
  26. F_CPU = 16000000
  27. # Output format. (can be srec, ihex, binary)
  28. FORMAT = ihex
  29. # Target file name (without extension).
  30. TARGET = main
  31. # List C source files here. (C dependencies are automatically generated.)
  32. SRC = $(TARGET).c
  33. SRC += serial.c # Additional Source-File
  34. SRC += cube.c
  35. SRC += twi.c
  36. SRC += mem.c
  37. SRC += audio.c
  38. SRC += time.c
  39. SRC += memLayer.c
  40. SRC += strings.c
  41. SRC += buffhelp.c
  42. SRC += visualizer.c
  43. SRC += animations.c
  44. SRC += transmit.c
  45. # List Assembler source files here.
  46. # Make them always end in a capital .S. Files ending in a lowercase .s
  47. # will not be considered source files but generated files (assembler
  48. # output from the compiler), and will be deleted upon "make clean"!
  49. # Even though the DOS/Win* filesystem matches both .s and .S the same,
  50. # it will preserve the spelling of the filenames, and gcc itself does
  51. # care about how the name is spelled on its command-line.
  52. ASRC =
  53. # Optimization level, can be [0, 1, 2, 3, s].
  54. # 0 = turn off optimization. s = optimize for size.
  55. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
  56. OPT = s
  57. # Debugging format.
  58. # Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
  59. # AVR (extended) COFF requires stabs, plus an avr-objcopy run.
  60. #DEBUG = stabs
  61. # List any extra directories to look for include files here.
  62. # Each directory must be seperated by a space.
  63. EXTRAINCDIRS = header
  64. # Compiler flag to set the C Standard level.
  65. # c89 - "ANSI" C
  66. # gnu89 - c89 plus GCC extensions
  67. # c99 - ISO C99 standard (not yet fully implemented)
  68. # gnu99 - c99 plus GCC extensions
  69. CSTANDARD = -std=gnu99
  70. # Place -I options here
  71. CINCS =
  72. # Compiler flags.
  73. # -g*: generate debugging information
  74. # -O*: optimization level
  75. # -f...: tuning, see GCC manual and avr-libc documentation
  76. # -Wall...: warning level
  77. # -Wa,...: tell GCC to pass this to the assembler.
  78. # -adhlns...: create assembler listing
  79. #CFLAGS = -g$(DEBUG)
  80. CFLAGS += $(CDEFS) $(CINCS)
  81. CFLAGS += -O$(OPT)
  82. CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
  83. CFLAGS += -Wall -Wstrict-prototypes
  84. CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
  85. CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
  86. CFLAGS += $(CSTANDARD)
  87. CFLAGS += -DF_CPU=$(F_CPU)
  88. # Assembler flags.
  89. # -Wa,...: tell GCC to pass this to the assembler.
  90. # -ahlms: create listing
  91. # -gstabs: have the assembler create line number information; note that
  92. # for use in COFF files, additional information about filenames
  93. # and function names needs to be present in the assembler source
  94. # files -- see avr-libc docs [FIXME: not yet described there]
  95. ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
  96. ASFLAGS += -DF_CPU=$(F_CPU)
  97. #Additional libraries.
  98. # Minimalistic printf version
  99. PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
  100. # Floating point printf version (requires MATH_LIB = -lm below)
  101. PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
  102. PRINTF_LIB =
  103. # Minimalistic scanf version
  104. SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
  105. # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
  106. SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
  107. SCANF_LIB =
  108. MATH_LIB = -lm
  109. # External memory options
  110. # 64 KB of external RAM, starting after internal RAM (ATmega128!),
  111. # used for variables (.data/.bss) and heap (malloc()).
  112. #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
  113. # 64 KB of external RAM, starting after internal RAM (ATmega128!),
  114. # only used for heap (malloc()).
  115. #EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
  116. EXTMEMOPTS =
  117. # Linker flags.
  118. # -Wl,...: tell GCC to pass this to linker.
  119. # -Map: create map file
  120. # --cref: add cross reference to map file
  121. LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
  122. LDFLAGS += $(EXTMEMOPTS)
  123. LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
  124. # Programming support using avrdude. Settings and variables.
  125. # Programming hardware: alf avr910 avrisp bascom bsd
  126. # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
  127. #
  128. # Type: avrdude -c ?
  129. # to get a full listing.
  130. #
  131. AVRDUDE_PROGRAMMER = stk500
  132. # com1 = serial port. Use lpt1 to connect to parallel port.
  133. AVRDUDE_PORT = com1 # programmer connected to serial device
  134. AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
  135. #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
  136. # Uncomment the following if you want avrdude's erase cycle counter.
  137. # Note that this counter needs to be initialized first using -Yn,
  138. # see avrdude manual.
  139. #AVRDUDE_ERASE_COUNTER = -y
  140. # Uncomment the following if you do /not/ wish a verification to be
  141. # performed after programming the device.
  142. #AVRDUDE_NO_VERIFY = -V
  143. # Increase verbosity level. Please use this when submitting bug
  144. # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
  145. # to submit bug reports.
  146. #AVRDUDE_VERBOSE = -v -v
  147. AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
  148. AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
  149. AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
  150. AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
  151. # ---------------------------------------------------------------------------
  152. # Define directories, if needed.
  153. DIRAVR = /usr/local/CrossPack-AVR
  154. DIRAVRBIN = $(DIRAVR)/bin
  155. DIRAVRUTILS = $(DIRAVR)/bin
  156. DIRINC = .
  157. DIRLIB = $(DIRAVR)/lib
  158. # Define programs and commands.
  159. SHELL = bash
  160. CC = avr-gcc
  161. OBJCOPY = avr-objcopy
  162. OBJDUMP = avr-objdump
  163. SIZE = avr-size
  164. NM = avr-nm
  165. AVRDUDE = avrdude
  166. REMOVE = rm -f
  167. COPY = cp
  168. # Define Messages
  169. # English
  170. MSG_ERRORS_NONE = Errors: none
  171. MSG_BEGIN = -------- begin --------
  172. MSG_END = -------- end --------
  173. MSG_SIZE_BEFORE = Size before:
  174. MSG_SIZE_AFTER = Size after:
  175. MSG_COFF = Converting to AVR COFF:
  176. MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
  177. MSG_FLASH = Creating load file for Flash:
  178. MSG_EEPROM = Creating load file for EEPROM:
  179. MSG_EXTENDED_LISTING = Creating Extended Listing:
  180. MSG_SYMBOL_TABLE = Creating Symbol Table:
  181. MSG_LINKING = Linking:
  182. MSG_COMPILING = Compiling:
  183. MSG_ASSEMBLING = Assembling:
  184. MSG_CLEANING = Cleaning project:
  185. # Define all object files.
  186. OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
  187. # Define all listing files.
  188. LST = $(ASRC:.S=.lst) $(SRC:.c=.lst)
  189. # Compiler flags to generate dependency files.
  190. ### GENDEPFLAGS = -Wp,-M,-MP,-MT,$(*F).o,-MF,.dep/$(@F).d
  191. GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
  192. # Combine all necessary flags and optional flags.
  193. # Add target processor to flags.
  194. ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
  195. ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
  196. # Default target.
  197. all: begin gccversion sizebefore build finished end clean
  198. build: elf hex eep lss sym
  199. elf: $(TARGET).elf
  200. hex: $(TARGET).hex
  201. eep: $(TARGET).eep
  202. lss: $(TARGET).lss
  203. sym: $(TARGET).sym
  204. # Eye candy.
  205. # AVR Studio 3.x does not check make's exit code but relies on
  206. # the following magic strings to be generated by the compile job.
  207. begin:
  208. @echo
  209. @echo $(MSG_BEGIN)
  210. finished:
  211. @echo $(MSG_ERRORS_NONE)
  212. end:
  213. @echo $(MSG_END)
  214. @echo
  215. # Display size of file.
  216. HEXSIZE = $(SIZE) --mcu=$(MCU) --target=$(FORMAT) $(TARGET).hex
  217. ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(TARGET).elf
  218. sizebefore:
  219. @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
  220. sizeafter:
  221. @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
  222. # Display compiler version information.
  223. gccversion :
  224. @$(CC) --version
  225. # Program the device.
  226. program: $(TARGET).hex $(TARGET).eep
  227. $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
  228. # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
  229. COFFCONVERT=$(OBJCOPY) --debugging \
  230. --change-section-address .data-0x800000 \
  231. --change-section-address .bss-0x800000 \
  232. --change-section-address .noinit-0x800000 \
  233. --change-section-address .eeprom-0x810000
  234. coff: $(TARGET).elf
  235. @echo
  236. @echo $(MSG_COFF) $(TARGET).cof
  237. $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
  238. extcoff: $(TARGET).elf
  239. @echo
  240. @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
  241. $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
  242. # Create final output files (.hex, .eep) from ELF output file.
  243. %.hex: %.elf
  244. @echo
  245. @echo $(MSG_FLASH) $@
  246. $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
  247. %.eep: %.elf
  248. @echo
  249. @echo $(MSG_EEPROM) $@
  250. -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
  251. --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
  252. # Create extended listing file from ELF output file.
  253. %.lss: %.elf
  254. @echo
  255. @echo $(MSG_EXTENDED_LISTING) $@
  256. $(OBJDUMP) -h -S $< > $@
  257. # Create a symbol table from ELF output file.
  258. %.sym: %.elf
  259. @echo
  260. @echo $(MSG_SYMBOL_TABLE) $@
  261. $(NM) -n $< > $@
  262. # Link: create ELF output file from object files.
  263. .SECONDARY : $(TARGET).elf
  264. .PRECIOUS : $(OBJ)
  265. %.elf: $(OBJ)
  266. @echo
  267. @echo $(MSG_LINKING) $@
  268. $(CC) $(ALL_CFLAGS) $(OBJ) --output $@ $(LDFLAGS)
  269. # Compile: create object files from C source files.
  270. %.o : %.c
  271. @echo
  272. @echo $(MSG_COMPILING) $<
  273. $(CC) -c $(ALL_CFLAGS) $< -o $@
  274. # Compile: create assembler files from C source files.
  275. %.s : %.c
  276. $(CC) -S $(ALL_CFLAGS) $< -o $@
  277. # Assemble: create object files from assembler source files.
  278. %.o : %.S
  279. @echo
  280. @echo $(MSG_ASSEMBLING) $<
  281. $(CC) -c $(ALL_ASFLAGS) $< -o $@
  282. # Target: clean project.
  283. clean: begin clean_list finished end
  284. clean_list:
  285. $(REMOVE) $(TARGET).eep
  286. $(REMOVE) $(TARGET).obj
  287. $(REMOVE) $(TARGET).cof
  288. $(REMOVE) $(TARGET).map
  289. $(REMOVE) $(TARGET).obj
  290. $(REMOVE) $(TARGET).a90
  291. $(REMOVE) $(TARGET).sym
  292. $(REMOVE) $(TARGET).lnk
  293. $(REMOVE) $(TARGET).lss
  294. $(REMOVE) $(OBJ)
  295. $(REMOVE) $(LST)
  296. $(REMOVE) $(SRC:.c=.s)
  297. $(REMOVE) $(SRC:.c=.d)
  298. $(REMOVE) .dep/*
  299. @if [ -f $(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); fi
  300. $(REMOVE) $(TARGET).elf
  301. # Include the dependency files.
  302. -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
  303. # Listing of phony targets.
  304. .PHONY : all begin finish end sizebefore sizeafter gccversion \
  305. build elf hex eep lss sym coff extcoff \
  306. clean clean_list program