Trackball/hardware/trackball.scad

/*
 * Trackball
 * Copyright 2022 Thomas Buck - thomas@xythobuz.de
 *
 * Required parts:
 *  - 1x Raspberry Pi Pico
 *  - 5x Cherry MX compatible switches and keycaps
 *  - 1x Billard ball, diameter 38mm 
 *  - 3x Si3N4 static bearing balls, diameter 3mm
 *  - 3x spring, diameter 2mm, length 10mm
 *  - 1x PMW3360 sensor with breakout board
 *  - 8x M2 screw, length 5mm
 *  - 8x M2 heat melt insert, length 4mm
 *
 * For the PMW3360 breakout board get this:
 * https://github.com/jfedor2/pmw3360-breakout
 *
 * The "Threads" library used by this project is:
 * Copyright 2022 Dan Kirshner - dan_kirshner@yahoo.com
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * See <http://www.gnu.org/licenses/>.
 */

// https://www.thingiverse.com/thing:421524
use <external/cherry_mx.scad>

// https://dkprojects.net/openscad-threads/
use <external/threads.scad>
//use <threadlib.scad>

// ######################
// ## Rendering Select ##
// ######################

//ball_and_roller();
//pico();
//sensor();
//mx_switch_cutout(wall);
//mx_switch_test();
//roller_mount_test();
roller_mount_tri();
//roller_holder();
//trackball();

// #######################
// #### Configuration ####
// #######################

ball_dia = 38.0;
roller_dia = 3.0;

roller_ball_h = 8;
roller_count = 3;

wall = 3.0;

cut_roller_holder = false;
draw_threads = true;
$c = 0.1;
$e = 0.01;

// #######################
// ## Raspberry Pi Pico ##
// #######################

pico_w = 21;
pico_l = 51;
pico_d = 1.6; // todo
pico_hole_d = 2.1;
pico_hole_x = 4.8;
pico_hole_y = 2.0;
pico_hole_d_x = 11.4;
pico_hole_d_y = pico_l - 2 * pico_hole_y;
pico_usb_w = 8.0;
pico_usb_h = 3.0; // todo
pico_usb_d = 10.0; // todo
pico_usb_off = 1.3;

pico_h = pico_d + 1; // todo

// ######################
// ### PMW3360 Sensor ###
// ######################

// https://github.com/jfedor2/pmw3360-breakout
sensor_w = 22;
sensor_l = 34;
sensor_pcb_h = 1.6;
sensor_hole_dia = 2.2;
sensor_hole_off_x = 3.0;
sensor_hole_off_y = 3.0;
sensor_hole_dist_x = 16.0;
sensor_hole_dist_y = 24.5;
sensor_cut_w = 8.0 + 0.5;
sensor_cut_h = 17.26;
sensor_cut_off_x = 7.0 - 0.25;
sensor_cut_off_y = 5.27;
sensor_cut_edge_to_pin1 = 2.75;
sensor_edge_to_pin1 = 1.52;

sensor_ball_to_lens_top = 2.4;
sensor_ball_to_chip_bottom = 9.81;

sensor_chip_w = 9.1;
sensor_chip_l = 16.2;
sensor_chip_h = 2.21;

sensor_pin_w = 0.5;
sensor_pin_h = 4.51;
sensor_pin_d = 0.2;
sensor_pin_dist = 10.7;
sensor_pin_off_top = 0.5;
sensor_pin_pitch = 0.89;

sensor_pin1_to_optical_center = 5.66;

// ######################
// ## MX Switch Cutout ##
// ######################

// https://geekhack.org/index.php?topic=70654.0
mx_co_w = 14.0;
mx_co_w_add = 0.8;
mx_co_h = 14.0;
mx_co_h_off_1 = 1.0;
mx_co_h_off_2 = 3.5;
mx_co_h_off_3 = mx_co_h - 2 * (mx_co_h_off_1 + mx_co_h_off_2);
mx_co_r = 0.4;

// https://geekhack.org/index.php?topic=71550.0
mx_co_th = 1.5 - 0.1;
mx_co_b_add = 1.0;
mx_co_b_w = mx_co_w + mx_co_b_add;
mx_co_b_h = mx_co_h + mx_co_b_add;

mx_travel = 3.9;

// ######################
// ### Implementation ###
// ######################

m3_thread=2.7;
m2_thread=1.8;
roller_thread_dia = roller_dia + 5.0;
roller_thread_pitch = 2.0;
roller_h = roller_dia + 7.0;
roller_ball_h_off = 0.4;
roller_ball_hold_off = 0.5;
roller_thread_hole = roller_dia - 1;
roller_small_hole = sphere_r_at_h(roller_ball_hold_off, roller_dia / 2) * 2;

roller_ridge_h = 1.5;
roller_mount_angle_off = 90;
roller_mount_dia = roller_thread_dia + 2.0;

ball_h = 15; // todo

switch_test_w = 25;

$fn = 42;

function sphere_r_at_h(h, r) = r * sin(acos(h / r));
function sphere_angle_at_rh(h, r) = acos(h / r);

module mx_switch_cutout(h) {
    translate([-mx_co_w / 2 - mx_co_w_add, -mx_co_h / 2, 0]) {
        linear_extrude(h + 1) {
            translate([mx_co_w_add, 0]) {
                square([mx_co_w, mx_co_h]);
                
                for (x = [mx_co_r / 2, mx_co_w - mx_co_r / 2])
                for (y = [mx_co_r / 2, mx_co_h - mx_co_r / 2])
                translate([x, y])
                circle(r = mx_co_r);
            }
            
            for (x = [0, mx_co_w + mx_co_w_add])
            for (y = [0, mx_co_h_off_2 + mx_co_h_off_3])
            translate([x, mx_co_h_off_1 + y, 0])
            square([mx_co_w_add, mx_co_h_off_2]);
        }
        
        translate([mx_co_w_add - mx_co_b_add / 2, -mx_co_b_add / 2, -1])
        cube([mx_co_b_w, mx_co_b_h, h - mx_co_th + 1]);
    }
}

module mx_switch_test() {
    difference() {
        translate([-switch_test_w / 2, -switch_test_w / 2, 0])
        cube([switch_test_w, switch_test_w, wall]);
        
        mx_switch_cutout(wall);
        
        translate([0, -switch_test_w / 2 + 1, wall - 1.0])
        linear_extrude(1.1)
        text("switch test", size = 3, halign = "center");
    }
    
    %translate([0, 0, wall])
    rotate([0, 0, 180])
    mx_switch($t);
}

module pico() {
    translate([-pico_w / 2, -pico_l / 2, 0])
    difference() {
        union() {
            color("green")
            cube([pico_w, pico_l, pico_d]);
            
            translate([(pico_w - pico_usb_w) / 2, pico_l - pico_usb_d + pico_usb_off, pico_d])
            cube([pico_usb_w, pico_usb_d, pico_usb_h]);
        }
        
        for (x = [0, pico_hole_d_x])
        for (y = [0, pico_hole_d_y])
        translate([pico_hole_x + x, pico_hole_y + y, -1])
        cylinder(d = pico_hole_d, h = pico_d + 2);
    }
}

module sensor() {
    translate([-sensor_w / 2, -sensor_l / 2, 0])
    difference() {
        color("green")
        cube([sensor_w, sensor_l, sensor_pcb_h]);
        
        translate([sensor_cut_off_x, sensor_cut_off_y, -1])
        cube([sensor_cut_w, sensor_cut_h, sensor_pcb_h + 2]);
        
        for (x = [0, sensor_hole_dist_x])
        for (y = [0, sensor_hole_dist_y])
        translate([sensor_hole_off_x + x, sensor_hole_off_y + y, -1])
        cylinder(d = sensor_hole_dia, h = sensor_pcb_h + 2);
    }
    
    color("#303030")
    translate([-sensor_chip_w / 2, -sensor_l / 2 - sensor_chip_l + sensor_edge_to_pin1 + sensor_cut_off_y + sensor_cut_h - sensor_cut_edge_to_pin1, -sensor_chip_h])
    cube([sensor_chip_w, sensor_chip_l, sensor_chip_h]);
    
    translate([0, -sensor_l / 2 - 15 * sensor_pin_pitch + sensor_cut_off_y + sensor_cut_h - sensor_cut_edge_to_pin1, 0])
    for (p = [0 : 15])
    translate([0, p * sensor_pin_pitch, 0])
    for (x = [-sensor_pin_dist / 2, sensor_pin_dist / 2])
    if (((p % 2 == 0) && (x < 0))
            || ((p % 2 == 1) && (x > 0)))
    translate([-sensor_pin_d / 2 + x, -sensor_pin_w / 2, -sensor_chip_h + sensor_pin_off_top])
    cube([sensor_pin_d, sensor_pin_w, sensor_pin_h]);
    
    color("cyan")
    translate([0, -sensor_l / 2 + sensor_cut_off_y + sensor_cut_h - sensor_cut_edge_to_pin1 - sensor_pin1_to_optical_center, -sensor_chip_h + 1])
    cylinder(d = 0.2, h = sensor_ball_to_chip_bottom - 1);
}
module ball_and_roller() {
    color("red")
    sphere(d = ball_dia, $fn = 200);
    
    for (r = [0 : roller_count - 1])
    rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
    translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
    rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
    translate([0, 0, -roller_dia / 2])
    roller_holder();
}

module roller_holder() {

    echo(roller_h);
    translate([0, 0, -roller_h + roller_dia / 2])
    difference() {
        color("magenta")
        union() {
            // top screw part
            translate([0, 0,  roller_h-roller_dia/2 + roller_ball_h_off-3])
                cylinder(d1 = roller_mount_dia, d2=roller_dia+1,  h = 3);
            cylinder(d = roller_mount_dia, h = roller_h-roller_dia/2 + roller_ball_h_off-3);
            
        }
        
        translate([0, 0, -$e]) {
            cylinder(d = roller_thread_hole, h = $e+ roller_h - roller_dia / 2 + roller_ball_h_off + roller_ball_hold_off);
        }
    
        translate([0, 0, roller_h - roller_dia / 2])
            sphere(d = roller_dia , $fn=$fn*4 );

        
        if (cut_roller_holder) {
            translate([-roller_thread_dia / 2 - 1, -roller_thread_dia, -1])
                cube([roller_thread_dia + 2, roller_thread_dia, roller_h + 2]);
        }
    }
    
    %color("blue")
    sphere(d = roller_dia);
}

module roller_mount() {
    echo(roller_h);
    translate([0, 0, -1-roller_h + roller_dia / 2]) {
        difference() {
            cylinder(d=roller_mount_dia+wall,h=roller_h/2);
            translate([0,0,1])
            cylinder(d=roller_mount_dia+$c*2,h=roller_h/2+$e);
        }
    }
}

module roller_mount_test() {
    roller_holder();
    roller_mount();
}

module roller_mount_tri() {

difference() {
    union(){
        difference() {
             hull() {
                translate([0, 0, 0])
                for (r = [0 : roller_count - 1])
                rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
                translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
                rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
                translate([0, 0, -roller_h])
                cylinder(d=roller_mount_dia+wall+1,h=roller_h+1);
                
                translate([0,0,-ball_dia/2-5])
                cylinder(d=base_dia,h=$e);
            }
            
            for (r = [0 : roller_count - 1])
            rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
            translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
            rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
            translate([0, 0, -roller_h])
            cylinder(d=roller_mount_dia+0.2,h=ball_dia/2+roller_h);
            
            sphere($fn=$fn*4, d=ball_dia+$c*2+1);
            
        }
        for (r = [0 : roller_count - 1])
        rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
        translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
        rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
        translate([0, 0, 0])
        roller_mount();
    }
        
        translate([0, 0, 0])
        for (r = [0 : roller_count - 1])
        rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
        translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
        rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
        translate([0, 0, -roller_h/2])
        rotate([0,-90,0])
        translate([0,0,2])
        {
        cylinder(d=m2_thread,h=ball_dia);
            translate([0,0,roller_mount_dia/4+wall])
        cylinder(d=m2_thread+1,h=ball_dia);
        }
}
    
            
}

base_dia = pico_l + 9;

module trackball() {
    %translate([0, 0, ball_dia / 2 + ball_h])
    ball_and_roller();
    
    %rotate([0, 180, 0])
    pico();
    
    %translate([0, sensor_l / 2 - sensor_cut_off_y - sensor_cut_h + sensor_cut_edge_to_pin1 + sensor_pin1_to_optical_center, ball_h + sensor_chip_h - sensor_ball_to_chip_bottom])
    sensor();
    
    translate([0, 0, ball_dia / 2 + ball_h])
    for (r = [0 : roller_count - 1])
    rotate([0, 0, roller_mount_angle_off + 360 / roller_count * r])
    translate([sphere_r_at_h(roller_ball_h - ball_dia / 2, ball_dia / 2), 0, -ball_dia / 2 + roller_ball_h])
    rotate([0, 180 + sphere_angle_at_rh(roller_ball_h - ball_dia / 2, ball_dia / 2), 0])
    translate([0, 0, -roller_dia / 2])
    translate([0, 0, -roller_h + roller_dia / 2 - roller_ball_h_off])
    roller_mount();
    
    color("grey")
    translate([0, 0, -8])
    cylinder(d = base_dia, h = wall);
}