Added Raspberry Pi config

configs/raspi_defconfig

@@ -0,0 +1,35 @@
+BR2_arm=y
+BR2_arm1176jzf_s=y
+BR2_ARM_EABIHF=y
+
+BR2_DL_DIR="$(HOME)/.buildroot-dl"
+BR2_CCACHE=y
+
+BR2_TARGET_GENERIC_HOSTNAME="raspberrypi"
+BR2_TARGET_GENERIC_ISSUE="Welcome to the CamCorder"
+BR2_TARGET_GENERIC_ROOT_PASSWD="camcorder"
+
+BR2_TARGET_GENERIC_GETTY_PORT="tty1"
+
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d33d0293e245badc4ca6ede3984d8bb8ea63cb1a"
+BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
+BR2_LINUX_KERNEL_ZIMAGE=y
+
+# Build the DTBs for A/B, A+/B+ and compute module from the kernel sources
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm"
+
+BR2_PACKAGE_RPI_FIRMWARE=y
+# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
+
+BR2_PACKAGE_FFMPEG=y
+BR2_PACKAGE_FFMPEG_SWSCALE=y
+

flash.sh

@@ -37,6 +37,27 @@ if [ -e output/images/imx23_olinuxino_dev_linux.sb ] ; then
 elif [ -e output/images/u-boot.sd ] ; then
 	echo Writing U-Boot bootstream
 	sudo dd if=output/images/u-boot.sd of="$1"1
+elif [ -e output/images/ ] ; then
+    echo Creaeting boot filesystem
+    sudo mkfs.vfat -F 16 -n boot "$1"1
+
+    echo Mounting boot filesystem
+	sudo mkdir -p /media/boot
+	sudo mount "$1"1 /media/boot
+
+    echo Copying bootloader files
+    sudo cp output/images/rpi-firmware/* /media/boot/
+    sudo cp output/images/*.dtb /media/boot/
+
+    echo Preparing and copying Kernel Image
+    output/host/usr/bin/mkknlimg output/images/zImage /media/boot/zImage
+
+    echo Synchronising changes to disk
+	sudo sync
+
+	echo Unmounting boot filesystem
+	sudo umount /media/boot
+	sudo rm -rf /media/boot
 else
 	echo Could not find a suitable bootstream!
 fi
@@ -58,11 +79,13 @@ if [ -e output/images/rootfs.tar ] ; then
 	echo Unmounting root filesystem
 	sudo umount /media/rootfs
 	sudo rm -rf /media/rootfs
-else
-	echo Writing root filesystem
+elif [ -e output/images/rootfs.ext2 ] ; then
+	echo Writing ext2 root filesystem
 	sudo dd if=output/images/rootfs.ext2 of="$1"2 bs=512
 
 	echo Synchronising changes to disk
 	sudo sync
+else
+    echo Could not find a suitable root filesystem!
 fi