Ingen beskrivning
Du kan inte välja fler än 25 ämnen Ämnen måste starta med en bokstav eller siffra, kan innehålla bindestreck ('-') och vara max 35 tecken långa.
Thomas Buck 0dc8adb1c7 Allow login on serial port 8 år sedan
board Add Dropbear, missing files. 8 år sedan
buildroot @ ecf55c3f02 Initial commit 8 år sedan
configs Allow login on serial port 8 år sedan
.gitignore Add Dropbear, missing files. 8 år sedan
.gitmodules Initial commit 8 år sedan
Config.in Initial commit 8 år sedan
README.md Link to blog in Readme 8 år sedan
build.sh Added build script 8 år sedan
external.mk Initial commit 8 år sedan
flash.sh Extended Raspi config, fixed flash.sh script 8 år sedan

README.md

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

For more informations, read my blog post about this project.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

Working with Git Submodules

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

Sources

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.