Keine Beschreibung
Du kannst nicht mehr als 25 Themen auswählen Themen müssen mit entweder einem Buchstaben oder einer Ziffer beginnen. Sie können Bindestriche („-“) enthalten und bis zu 35 Zeichen lang sein.
Thomas Buck 4199f2e968 Newest buildroot, small flash.sh fixes, disabled ccache, removed gst-opengl. vor 3 Jahren
board Added RPI Userland, GL vor 3 Jahren
buildroot @ 318a4d8489 Newest buildroot, small flash.sh fixes, disabled ccache, removed gst-opengl. vor 3 Jahren
configs Newest buildroot, small flash.sh fixes, disabled ccache, removed gst-opengl. vor 3 Jahren
.gitignore Add Dropbear, missing files. vor 3 Jahren
.gitmodules Initial commit vor 3 Jahren
Config.in Initial commit vor 3 Jahren
README.md Link to blog in Readme vor 3 Jahren
build.sh Newer buildroot and Linux versions, added gstreamer. vor 3 Jahren
external.mk Initial commit vor 3 Jahren
flash.sh Newest buildroot, small flash.sh fixes, disabled ccache, removed gst-opengl. vor 3 Jahren

README.md

CamCorder-Buildroot

This is a buildroot project creating a bootable SD card Image for the Olimex iMX233-OLinuXino-Micro (and all other boards of this series).

U-Boot is used instead of the MXS-Bootlets to support SDHC cards. The current mainline Linux Kernel (4.4.1) has been used.

For more informations, read my blog post about this project.

Getting started

To build, first load the configuration, edit it if neccessary, and run the build:

./build.sh olinuxino_defconfig
./build.sh menuconfig
./build.sh

If this succeeds, insert your SD card, find out it’s identifier, and run this (replace sdc with your disk!):

./flash.sh /dev/sdc

Then eject the card, insert it into the OLinuXino, apply power and watch the boot console on the Debug Serial port.

Working with Git Submodules

To clone this repository, enter the following:

git clone https://xythobuz.de/git/CaseLights.git
git submodule init
git submodule update

When pulling changes from this repository, you may need to update the submodule:

git submodule update

Sources

This is mostly based on the olinuxino_defconfig included with buildroot. To get U-Boot to compile for the OLinuXino, I included this patch from here.