drumkit

LARS - Looping Automated Rhythm Station

This is a simple drum machine / loopstation. It’s made for three hand-wound solenoids mounted to a tambourine. It is controlled by a Raspberry Pi Pico on a custom PCB.

Please take a look at the auto-generated documentation.

Also see this blog post for some more context.

Quick Start

Initialize your local repo and prepare the build:

git clone https://git.xythobuz.de/thomas/drumkit.git
cd drumkit
git submodule update --init
cd pico-sdk
git submodule update --init
cd ..
mkdir build
cd build
cmake ..
cd ..

Then you can build new binaries like this:

make -Cbuild -j4

For the first time, flash as usual using the mass storage bootloader (hold BOOTSEL while pluggin in the Pico). After the firmware has been flashed once you can just use the included flash.sh to avoid having to hold the button. Use debug.sh to open a serial console via USB.

Hardware Connections

Pin 1    GP0    I2C0 SDA
Pin 2    GP1    I2C0 SCL

Pin 29   GP22   Output Channel A
Pin 31   GP26   Output Channel B
Pin 32   GP27   Output Channel C

Pin 34   GP28   Vbat (ADC2)

Pin 11   GP8    Button 1
Pin 12   GP9    Button 2
Pin 16   GP12   Button 3
Pin 19   GP14   Button 4

Pin 22   GP17   Encoder A
Pin 24   GP18   Encoder B
Pin 21   GP16   Encoder Click

Pin 14   GP10   LED 1
Pin 15   GP11   LED 2
Pin 17   GP13   LED 3
Pin 20   GP15   LED 4

License

The firmware of this project is licensed as GPLv3. A copy of the license can be found in COPYING.

It uses the Pi Pico SDK, licensed as BSD 3-clause, and therefore also TinyUSB, licensed under the MIT license.

The code in src/encoder.c is derived from mathertel/RotaryEncoder and therefore licensed as BSD 3-clause.

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

See <http://www.gnu.org/licenses/>.

The schematic and PCB design of this project is licensed under the CERN Open Hardware Licence Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0+) or any later version. A copy of the license can be found in LICENSE.

 ------------------------------------------------------------------------------
| This source describes Open Hardware and is licensed under the CERN-OHL-S v2  |
| or any later version.                                                        |
|                                                                              |
| You may redistribute and modify this source and make products using it under |
| the terms of the CERN-OHL-S v2 (https://ohwr.org/cern_ohl_s_v2.txt)          |
| or any later version.                                                        |
|                                                                              |
| This source is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY,          |
| INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A         |
| PARTICULAR PURPOSE. Please see the CERN-OHL-S v2 (or any later version)      |
| for applicable conditions.                                                   |
|                                                                              |
| Source location: https://git.xythobuz.de/thomas/drumkit                      |
|                                                                              |
| As per CERN-OHL-S v2 section 4, should You produce hardware based on this    |
| source, You must where practicable maintain the Source Location visible      |
| on the external case of the Gizmo or other products you make using this      |
| source.                                                                      |
 ------------------------------------------------------------------------------