fuellfix-v2/hardware/common.scad

include <config.scad>;

$fn = 42;

module prism(l, w, h) {
    polyhedron(
        points = [[0,0,0], [l,0,0], [l,w,0], [0,w,0], [0,w,h], [l,w,h]],
        faces = [[0,1,2,3],[5,4,3,2],[0,4,5,1],[0,3,4],[5,2,1]]
    );
}

module roundedcylinder(d, h, r, top = false) {
    hull() // needed, otherwise rendering fails
    rotate_extrude(convexity = 10)
    translate([d / 2, 0, 0])
    rotate([0, 180, 0]) {
        if (top) {
            translate([0, r])
            square([d / 2, h - r * 2]);
        } else {
            translate([0, r])
            square([d / 2, h - r]);
        }
        
        //translate([r, 0])
        //square([d / 2 - r, r]);
        
        translate([r, r])
        circle(r = r);
        
        if (top) {
            translate([r, h - r])
            circle(r = r);
        
            //translate([r, h - r])
            //square([d / 2 - r, r]);
        }
    }
}

module rail_2020(l, n = "") {
    translate([0, 10, 10])
    difference() {
        translate([0, -10, -10])
        cube([l, 20, 20]);
        
        translate([-1, 0, 0])
        rotate([0, 90, 0])
        cylinder(d = 4.2, h = l + 2);
        
        for (i = [0, 90, 180, 270])
        rotate([i, 0, 0]) {
            translate([-1, -6.25 / 2, 10 - 4.3 - 1.8])
            cube([l + 2, 6.25, 4.3 + 1.8 + 1]);
            
            for (j = [-1, 1])
            scale([1, j, 1])
            translate([-1, -6.25 / 2, 10 - 1.8])
            rotate([45, 0, 0])
            cube([l + 2, 6.25, 4.3 + 1.8 + 1]);
        }
    }
}

module rail_2020_x(l, n = "") {
    echo("2020 rail", n, str(l));
    rail_2020(l, n);
}

module rail_2020_y(l, n = "") {
    translate([20, 0, 0])
    rotate([0, 0, 90])
    rail_2020_x(l, n);
}

module rail_2040_x(l, n = "") {
    echo("2040 rail", n, str(l));
    rail_2020(l, n);
    translate([0, 0, -20])
    rail_2020(l, n);
}

module rail_2040_y(l, n = "") {
    translate([20, 0, 0])
    rotate([0, 0, 90])
    rail_2040_x(l, n);
}

module rail_wheel() {
    difference() {
        union() {
            cylinder(d1 = rail_wheel_mid, d2 = rail_wheel_outer, h = (rail_wheel_height - rail_wheel_center_height) / 2);
            
            translate([0, 0, (rail_wheel_height - rail_wheel_center_height) / 2])
            cylinder(d = rail_wheel_outer, h = rail_wheel_center_height);
            
            translate([0, 0, (rail_wheel_height - rail_wheel_center_height) / 2 + rail_wheel_center_height])
            cylinder(d1 = rail_wheel_outer, d2 = rail_wheel_mid, h = (rail_wheel_height - rail_wheel_center_height) / 2);
        }
        translate([0, 0, -1])
        cylinder(d = rail_wheel_inner, rail_wheel_height + 2);
    }
}

module nema17_holes_face(height, length, hole) {
    translate([nema17_size / 2, nema17_size / 2, height - 4.5])
    for (i = [1, -1])
    for (j = [1, -1])
    translate([i * nema17_hole_off, j * nema17_hole_off, 0])
    cylinder(d = hole, h = length);
}

module nema17(length) {
    difference() {
        cube([nema17_size, nema17_size, length]);
        nema17_holes_face(length, 5.0, nema17_hole_size);
    }
    
    translate([nema17_size / 2, nema17_size / 2, length]) {
        cylinder(d = nema17_center_size, h = nema17_center_height);
        cylinder(d = nema17_shaft_size, h = nema17_shaft_length);
    }
}

module dispenser_arm() {
    translate([0, dispenser_arm_tab_off, dispenser_arm_tab_hole_off])
    rotate([90, 0, 0])
    cylinder(d = dispenser_arm_dia, h = dispenser_arm_len);
    
    translate([0, dispenser_arm_tab_off, dispenser_arm_tab_hole_off - dispenser_arm_height])
    cylinder(d = dispenser_arm_dia, h = dispenser_arm_height);
    
    translate([-dispenser_arm_handle_width / 2, dispenser_arm_tab_off - dispenser_arm_len - dispenser_arm_handle_len + dispenser_arm_handle_overlap, dispenser_arm_tab_hole_off + dispenser_arm_dia / 2])
    cube([dispenser_arm_handle_width, dispenser_arm_handle_len, dispenser_arm_handle_height]);
}

module dispenser() {
    difference() {
        cylinder(d1 = dispenser_nozzle_end_dia_1, d2 = dispenser_nozzle_end_dia_2, h = dispenser_nozzle_end_length);
        translate([0, 0, -0.01])
        cylinder(d1 = dispenser_nozzle_end_dia_1 - dispenser_wall * 2, d2 = dispenser_nozzle_end_dia_2 - dispenser_wall * 2, h = dispenser_nozzle_end_length + 0.02);
    }
    
    translate([0, 0, dispenser_nozzle_end_length])
    difference() {
        cylinder(d1 = dispenser_nozzle_cap_dia_1, d2 = dispenser_nozzle_cap_dia_2, h = dispenser_nozzle_cap_height);
        translate([0, 0, -0.01])
        cylinder(d1 = dispenser_nozzle_cap_dia_1 - dispenser_wall * 2, d2 = dispenser_nozzle_cap_dia_2 - dispenser_wall * 2, h = dispenser_nozzle_cap_height + 0.02);
    }
    
    translate([0, 0, dispenser_nozzle_end_length + dispenser_nozzle_cap_height])
    difference() {
        cylinder(d = dispenser_nozzle_mid_dia, h = dispenser_nozzle_mid_height);
        translate([0, 0, -0.01])
        cylinder(d = dispenser_nozzle_mid_dia - dispenser_wall * 2, h = dispenser_nozzle_mid_height + 0.02);
    }
    
    translate([0, 0, dispenser_nozzle_end_length + dispenser_nozzle_cap_height + dispenser_nozzle_mid_height])
    difference() {
        cylinder(d = dispenser_nozzle_top_dia, h = dispenser_nozzle_top_height);
        translate([0, 0, -0.01])
        cylinder(d = dispenser_nozzle_top_dia - dispenser_wall * 2, h = dispenser_nozzle_top_height + 0.02);
    }
    
    translate([0, 0, dispenser_nozzle_end_length + dispenser_nozzle_cap_height + dispenser_nozzle_mid_height + dispenser_nozzle_top_height])
    difference() {
        cylinder(d1 = dispenser_mid_dia, d2 = dispenser_top_dia, h = dispenser_top_height);
        translate([0, 0, -0.01])
        cylinder(d1 = dispenser_mid_dia - dispenser_wall * 2, d2 = dispenser_top_dia - dispenser_wall * 2, h = dispenser_top_height + 0.02);
    }
    
    translate([0, -dispenser_top_dia / 2, dispenser_nozzle_end_length + dispenser_nozzle_cap_height + dispenser_nozzle_mid_height + dispenser_nozzle_top_height + dispenser_top_height])
    rotate([dispenser_handle_angle, 0, 0])
    translate([0, 0, -dispenser_handle_dia / 2])
    rotate([90, 0, 0])
    cylinder(d = dispenser_handle_dia, h = dispenser_handle_length);
    
    translate([0, dispenser_top_dia / 2 + dispenser_arm_handle_y, dispenser_nozzle_end_length + dispenser_nozzle_cap_height + dispenser_nozzle_mid_height + dispenser_nozzle_top_height + dispenser_top_height + dispenser_arm_handle_z])
    rotate([dispenser_arm_angle_bottom + anim_pos_extruder * (dispenser_arm_angle_top - dispenser_arm_angle_bottom), 0, 0])
    dispenser_arm();
}

dispenser_arm_angle_top = -5;
dispenser_arm_angle_bottom = 6;

dispenser();