Merge pull request #5250 from CONSULitAS/RCBugFix_K8200_backinsync_2016-11-18

K8200: Example configuration back in sync

Marlin/example_configurations/K8200/Configuration.h

@@ -21,13 +21,6 @@
  */
 
 /**
- * Sample configuration file for Vellemann K8200
- * tested on K8200 with VM8201 (Display)
- * and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
- * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
- */
-
-/**
  * Configuration.h
  *
  * Basic settings such as:
@@ -58,6 +51,22 @@
  */
 #define CONFIGURATION_H_VERSION 010100
 
+/**
+ * Sample configuration file for Vellemann K8200
+ * tested on K8200 with VM8201 (Display)
+ * and Arduino 1.6.12 (Mac OS X) by @CONSULitAS, 2016-11-18
+ * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip
+ *
+ * Please choose your hardware options for the K8200:
+ */
+
+// VM8201 Display unit
+#define K8200_VM8201
+// K8204 Z axis upgrade rod and coupler -> TODO
+// #define K8200_K8204
+// K8203 direct drive extruder -> TODO
+// #define K8200_K8203
+
 //===========================================================================
 //============================= Getting Started =============================
 //===========================================================================
@@ -146,7 +155,11 @@
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
-#define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
+#if ENABLED(K8200_VM8201)
+  #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display)
+#else
+  #define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display)
+#endif
 
 // This defines the number of extruders
 // :[1, 2, 3, 4]
@@ -194,7 +207,7 @@
  *
  * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
  */
-#define POWER_SUPPLY 1
+#define POWER_SUPPLY 0
 
 #if POWER_SUPPLY > 0
   // Enable this option to leave the PSU off at startup.
@@ -274,7 +287,7 @@
 #define TEMP_WINDOW     1       // (degC) Window around target to start the residency timer x degC early.
 
 // Bed temperature must be close to target for this long before M190 returns success
-#define TEMP_BED_RESIDENCY_TIME 0   // (seconds)
+#define TEMP_BED_RESIDENCY_TIME 10  // (seconds)
 #define TEMP_BED_HYSTERESIS 3       // (degC) range of +/- temperatures considered "close" to the target one
 #define TEMP_BED_WINDOW     1       // (degC) Window around target to start the residency timer x degC early.
 
@@ -378,11 +391,11 @@
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 
-  // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
-  // from pidautotune
-  #define  DEFAULT_bedKp 341.88
-  #define  DEFAULT_bedKi 25.32
-  #define  DEFAULT_bedKd 1153.89
+    // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
+    // from pidautotune
+    #define  DEFAULT_bedKp 341.88
+    #define  DEFAULT_bedKi 25.32
+    #define  DEFAULT_bedKd 1153.89
 #endif // PIDTEMPBED
 
 // @section extruder
@@ -466,9 +479,9 @@
 #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
@@ -492,13 +505,12 @@
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600 }  // default steps per unit for K8200
-
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600}  // for K8200
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  */
-#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 500 }
+#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
@@ -583,9 +595,9 @@
 //    |           |
 //    O-- FRONT --+
 //  (0,0)
-#define X_PROBE_OFFSET_FROM_EXTRUDER -25     // X offset: -left  +right  [of the nozzle]
-#define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
-#define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
+#define X_PROBE_OFFSET_FROM_EXTRUDER 10  // X offset: -left  +right  [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
+#define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
@@ -660,7 +672,7 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   15 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 
 //
@@ -680,7 +692,7 @@
 // WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
-#define DISABLE_Z false // not for K8200 -> looses Steps
+#define DISABLE_Z false
 // Warn on display about possibly reduced accuracy
 //#define DISABLE_REDUCED_ACCURACY_WARNING
 
@@ -693,7 +705,7 @@
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
 #define INVERT_X_DIR false
-#define INVERT_Y_DIR false // was true -> why for K8200?
+#define INVERT_Y_DIR false // K8200: false
 #define INVERT_Z_DIR false
 
 // @section extruder
@@ -705,9 +717,9 @@
 #define INVERT_E3_DIR true
 
 // @section homing
-
-//#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
-                             // Be sure you have this distance over your Z_MAX_POS in case.
+// K8200: it is usual to have clamps for the glass plate on the heatbed
+#define Z_HOMING_HEIGHT 4   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
+                            // Be sure you have this distance over your Z_MAX_POS in case.
 
 // ENDSTOP SETTINGS:
 // Sets direction of endstops when homing; 1=MAX, -1=MIN
@@ -883,7 +895,7 @@
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
 //define this to enable EEPROM support
-#define EEPROM_SETTINGS
+#define EEPROM_SETTINGS // K8200: uses EEPROM by default
 
 #if ENABLED(EEPROM_SETTINGS)
   // To disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
@@ -917,12 +929,12 @@
 // @section temperature
 
 // Preheat Constants
-#define PREHEAT_1_TEMP_HOTEND 190
-#define PREHEAT_1_TEMP_BED     50 // K8200: set back to 70 if you have an upgraded heatbed power supply
+#define PREHEAT_1_TEMP_HOTEND 180
+#define PREHEAT_1_TEMP_BED     50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply
 #define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
 
 #define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED     60 // K8200: set back to 110 if you have an upgraded heatbed power supply
+#define PREHEAT_2_TEMP_BED     60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 //
@@ -1024,7 +1036,7 @@
 //  - Total time printing
 //
 // This information can be viewed by the M78 command.
-//#define PRINTCOUNTER
+#define PRINTCOUNTER
 
 //=============================================================================
 //============================= LCD and SD support ============================
@@ -1032,6 +1044,9 @@
 
 // @section lcd
 
+// K8200: for Display VM8201 with SD slot
+#if ENABLED(K8200_VM8201)
+
 //
 // LCD LANGUAGE
 //
@@ -1066,7 +1081,7 @@
 //
 // :['JAPANESE', 'WESTERN', 'CYRILLIC']
 //
-#define DISPLAY_CHARSET_HD44780 JAPANESE     // K8200: for Display VM8201
+#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware
 
 //
 // LCD TYPE
@@ -1104,7 +1119,7 @@
 //
 // Use CRC checks and retries on the SD communication.
 //
-//#define SD_CHECK_AND_RETRY
+#define SD_CHECK_AND_RETRY
 
 //
 // ENCODER SETTINGS
@@ -1112,13 +1127,13 @@
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+#define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+#define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item
 
 /**
  * Encoder Direction Options
@@ -1143,14 +1158,14 @@
 //  If CLOCKWISE normally moves DOWN this makes it go UP.
 //  If CLOCKWISE normally moves UP this makes it go DOWN.
 //
-//#define REVERSE_MENU_DIRECTION
+#define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side
 
 //
 // Individual Axis Homing
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 
 //
 // SPEAKER/BUZZER
@@ -1180,7 +1195,7 @@
 //
 // ULTIMAKER Controller.
 //
-//#define ULTIMAKERCONTROLLER
+#define ULTIMAKERCONTROLLER // K8200: for Display VM8201
 
 //
 // ULTIPANEL as seen on Thingiverse.
@@ -1338,6 +1353,8 @@
 //
 //#define SAV_3DLCD
 
+#endif // K8200_VM8201
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -20,12 +20,6 @@
  *
  */
 
-// Sample configuration file for Vellemann K8200
-// tested on K8200 with VM8201 (Display)
-// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21
-// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip
-
-
 /**
  * Configuration_adv.h
  *
@@ -36,6 +30,15 @@
  * Basic settings can be found in Configuration.h
  *
  */
+
+ /**
+  * Sample configuration file for Vellemann K8200
+  * tested on K8200 with VM8201 (Display)
+  * and Arduino 1.6.12 (Mac) by @CONSULitAS, 2016-11-18
+  * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip
+  *
+  */
+
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
 
@@ -80,6 +83,7 @@
  * If you get false positives for "Thermal Runaway" increase THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
+  // K8200 has weak heaters/power supply by default, so you have to relax!
   #define THERMAL_PROTECTION_PERIOD 60        // Seconds
   #define THERMAL_PROTECTION_HYSTERESIS 8     // Degrees Celsius
 
@@ -92,16 +96,19 @@
    * If you get false positives for "Heating failed" increase WATCH_TEMP_PERIOD and/or decrease WATCH_TEMP_INCREASE
    * WATCH_TEMP_INCREASE should not be below 2.
    */
+  // K8200 has weak heaters/power supply by default, so you have to relax!
   #define WATCH_TEMP_PERIOD 30                // Seconds
-  #define WATCH_TEMP_INCREASE 4               // Degrees Celsius
+  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
 /**
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD 20    // Seconds
-  #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+// K8200 has weak heaters/power supply by default, so you have to relax!
+// the default bed is so weak, that you can hardly go over 75°C
+  #define THERMAL_PROTECTION_BED_PERIOD 60    // Seconds
+  #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius
 
   /**
    * Whenever an M140 or M190 increases the target temperature the firmware will wait for the
@@ -358,7 +365,7 @@
 // Default stepper release if idle. Set to 0 to deactivate.
 // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
 // Time can be set by M18 and M84.
-#define DEFAULT_STEPPER_DEACTIVE_TIME 60
+#define DEFAULT_STEPPER_DEACTIVE_TIME 120
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // set to false if the nozzle will fall down on your printed part when print has finished.
@@ -535,7 +542,7 @@
 //#define LIN_ADVANCE
 
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
+  #define LIN_ADVANCE_K 140 // start value for PLA on K8200
 #endif
 
 // @section leveling
@@ -567,7 +574,7 @@
 #endif
 
 // Moves (or segments) with fewer steps than this will be joined with the next move
-#define MIN_STEPS_PER_SEGMENT 3
+#define MIN_STEPS_PER_SEGMENT 6
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
@@ -605,7 +612,7 @@
 // For debug-echo: 128 bytes for the optimal speed.
 // Other output doesn't need to be that speedy.
 // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
-#define TX_BUFFER_SIZE 0
+#define TX_BUFFER_SIZE 128
 
 // Enable an emergency-command parser to intercept certain commands as they
 // enter the serial receive buffer, so they cannot be blocked.
@@ -644,9 +651,9 @@
 
 // Add support for experimental filament exchange support M600; requires display
 #if ENABLED(ULTIPANEL)
-  // #define FILAMENT_CHANGE_FEATURE             // Enable filament exchange menu and M600 g-code (used for runout sensor too)
+  #define FILAMENT_CHANGE_FEATURE               // Enable filament exchange menu and M600 g-code (used for runout sensor too)
   #if ENABLED(FILAMENT_CHANGE_FEATURE)
-    #define FILAMENT_CHANGE_X_POS 3             // X position of hotend
+    #define FILAMENT_CHANGE_X_POS (X_MAX_POS-3) // X position of hotend
     #define FILAMENT_CHANGE_Y_POS 3             // Y position of hotend
     #define FILAMENT_CHANGE_Z_ADD 10            // Z addition of hotend (lift)
     #define FILAMENT_CHANGE_XY_FEEDRATE 100     // X and Y axes feedrate in mm/s (also used for delta printers Z axis)

Marlin/example_configurations/K8200/README.md

@@ -7,7 +7,7 @@
 * VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
 * german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
 
-I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.1 for Windows (SD library added to IDE manually) - everything works well.
+I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well.
 
 **Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)**
 * V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip)