Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN

Marlin/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/default/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1479,22 +1479,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -1454,22 +1454,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1479,22 +1479,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1488,22 +1488,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1485,22 +1485,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1485,22 +1485,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Mks/Robin/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1488,22 +1488,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/VORONDesign/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1493,22 +1493,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -1455,22 +1455,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1482,22 +1482,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1480,22 +1480,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1481,22 +1481,6 @@
   //#define TMC_DEBUG
 
   /**
-   * M915 Z Axis Calibration
-   *
-   * - Adjust Z stepper current,
-   * - Drive the Z axis to its physical maximum, and
-   * - Home Z to account for the lost steps.
-   *
-   * Use M915 Snn to specify the current.
-   * Use M925 Znn to add extra Z height to Z_MAX_POS.
-   */
-  //#define TMC_Z_CALIBRATION
-  #if ENABLED(TMC_Z_CALIBRATION)
-    #define CALIBRATION_CURRENT 250
-    #define CALIBRATION_EXTRA_HEIGHT 10
-  #endif
-
-  /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
    * https://github.com/teemuatlut/TMC2130Stepper

Marlin/src/gcode/feature/trinamic/M911-M915.cpp → Marlin/src/gcode/feature/trinamic/M911-M914.cpp

@@ -384,54 +384,4 @@
   }
 #endif // USE_SENSORLESS
 
-/**
- * TMC Z axis calibration routine
- */
-#if ENABLED(TMC_Z_CALIBRATION)
-  void GcodeSuite::M915() {
-    const uint16_t _rms = parser.seenval('S') ? parser.value_int() : CALIBRATION_CURRENT,
-                   _z = parser.seenval('Z') ? parser.value_linear_units() : CALIBRATION_EXTRA_HEIGHT;
-
-    if (!TEST(axis_known_position, Z_AXIS)) {
-      SERIAL_ECHOLNPGM("\nPlease home Z axis first");
-      return;
-    }
-
-    #if AXIS_IS_TMC(Z)
-      const uint16_t Z_current_1 = stepperZ.getMilliamps();
-      stepperZ.rms_current(_rms);
-    #endif
-    #if AXIS_IS_TMC(Z2)
-      const uint16_t Z2_current_1 = stepperZ2.getMilliamps();
-      stepperZ2.rms_current(_rms);
-    #endif
-    #if AXIS_IS_TMC(Z3)
-      const uint16_t Z3_current_1 = stepperZ3.getMilliamps();
-      stepperZ3.rms_current(_rms);
-    #endif
-
-    SERIAL_ECHOPAIR("\nCalibration current: Z", _rms);
-
-    soft_endstops_enabled = false;
-
-    do_blocking_move_to_z(Z_MAX_POS+_z);
-
-    #if AXIS_IS_TMC(Z)
-      stepperZ.rms_current(Z_current_1);
-    #endif
-    #if AXIS_IS_TMC(Z2)
-      stepperZ2.rms_current(Z2_current_1);
-    #endif
-    #if AXIS_IS_TMC(Z3)
-      stepperZ3.rms_current(Z3_current_1);
-    #endif
-
-    do_blocking_move_to_z(Z_MAX_POS);
-    soft_endstops_enabled = true;
-
-    SERIAL_ECHOLNPGM("\nHoming Z because we lost steps");
-    enqueue_and_echo_commands_P(PSTR("G28 Z"));
-  }
-#endif
-
 #endif // HAS_TRINAMIC

Marlin/src/gcode/gcode.cpp

@@ -662,9 +662,6 @@ void GcodeSuite::process_parsed_command(
         #if USE_SENSORLESS
           case 914: M914(); break;                                // M914: Set StallGuard sensitivity.
         #endif
-        #if ENABLED(TMC_Z_CALIBRATION)
-          case 915: M915(); break;                                // M915: TMC Z axis calibration.
-        #endif
       #endif
 
       #if HAS_MICROSTEPS

Marlin/src/gcode/gcode.h

@@ -804,9 +804,6 @@ private:
     #if USE_SENSORLESS
       static void M914();
     #endif
-    #if ENABLED(TMC_Z_CALIBRATION)
-      static void M915();
-    #endif
   #endif
 
   #if HAS_DIGIPOTSS || HAS_MOTOR_CURRENT_PWM || ENABLED(DIGIPOT_I2C) || ENABLED(DAC_STEPPER_CURRENT)

Marlin/src/inc/SanityCheck.h

@@ -341,6 +341,8 @@
   #error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
 #elif defined(MAX6675_SS2)
   #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
+#elif defined(TMC_Z_CALIBRATION)
+  #error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
 #endif
 
 #define BOARD_MKS_13     -47
@@ -1884,8 +1886,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 // Other TMC feature requirements
 #if ENABLED(HYBRID_THRESHOLD) && !STEALTHCHOP_ENABLED
   #error "Enable STEALTHCHOP_(XY|Z|E) to use HYBRID_THRESHOLD."
-#elif ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2) && !AXIS_IS_TMC(Z3)
-  #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis"
 #elif ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD
   #error "SENSORLESS_HOMING requires TMC2130 stepper drivers."
 #elif ENABLED(SENSORLESS_PROBING) && !HAS_STALLGUARD

Marlin/src/lcd/language/language_an.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Orichen X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Orichen Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Orichen Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrar Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Orichen XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Encetar (pretar)")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Vinient punto")

Marlin/src/lcd/language/language_bg.h

@@ -38,7 +38,6 @@
 #define MSG_AUTOSTART                       _UxGT("Автостарт")
 #define MSG_DISABLE_STEPPERS                _UxGT("Изкл. двигатели")
 #define MSG_AUTO_HOME                       _UxGT("Паркиране")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Калибровка Z")
 #define MSG_SET_HOME_OFFSETS                _UxGT("Задай Начало")
 #define MSG_SET_ORIGIN                      _UxGT("Изходна точка")
 #define MSG_PREHEAT_1                       _UxGT("Подгряване " PREHEAT_1_LABEL)

Marlin/src/lcd/language/language_ca.h

@@ -44,7 +44,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("X a origen")
 #define MSG_AUTO_HOME_Y                     _UxGT("Y a origen")
 #define MSG_AUTO_HOME_Z                     _UxGT("Z a origen")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibra Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Origen XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Premeu per iniciar")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Següent punt")

Marlin/src/lcd/language/language_cz.h

@@ -56,7 +56,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Domů osa X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Domů osa Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Domů osa Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibrovat Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Měření podložky")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Kliknutím spusťte")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Další bod")

Marlin/src/lcd/language/language_da.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Home X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibrer Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Klik når du er klar")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Næste punkt")

Marlin/src/lcd/language/language_de.h

@@ -51,7 +51,6 @@
 #define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
 #define MSG_AUTO_Z_ALIGN                    _UxGT("Z-Achsen ausgleichen")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibriere Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Home XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Klick zum Starten")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nächste Koordinate")

Marlin/src/lcd/language/language_el-gr.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Αρχικό σημείο X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Αρχικό σημείο Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Αρχικό σημείο Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Βαθμονόμηση Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Επαναφορά στο αρχικό σημείο ΧΥΖ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Κάντε κλικ για να ξεκινήσετε")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Επόμενο σημείο")

Marlin/src/lcd/language/language_el.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Αρχικό σημείο X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Αρχικό σημείο Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Αρχικό σημείο Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Βαθμονόμηση Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Επαναφορά Επ. Εκτύπωσης") //SHORTEN
 #define MSG_LEVEL_BED_WAITING               _UxGT("Επιπεδοποίηση επ. Εκτύπωσης περιμενει") //SHORTEN
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Επόμενο σημείο")

Marlin/src/lcd/language/language_en.h

@@ -103,9 +103,6 @@
 #ifndef MSG_AUTO_Z_ALIGN
   #define MSG_AUTO_Z_ALIGN                    _UxGT("Auto Z-Align")
 #endif
-#ifndef MSG_TMC_Z_CALIBRATION
-  #define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrate Z")
-#endif
 #ifndef MSG_LEVEL_BED_HOMING
   #define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
 #endif

Marlin/src/lcd/language/language_es.h

@@ -46,7 +46,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Origen X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Origen Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Origen Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrar Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Origen XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Iniciar (Presione)")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Siguiente punto")

Marlin/src/lcd/language/language_eu.h

@@ -46,7 +46,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("X jatorrira")
 #define MSG_AUTO_HOME_Y                     _UxGT("Y jatorrira")
 #define MSG_AUTO_HOME_Z                     _UxGT("Z jatorrira")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibratu Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("XYZ hasieraratzen")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Klik egin hasteko")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Hurrengo Puntua")

Marlin/src/lcd/language/language_fi.h

@@ -39,7 +39,6 @@
 #define MSG_AUTOSTART                       _UxGT("Automaatti")
 #define MSG_DISABLE_STEPPERS                _UxGT("Vapauta moottorit")
 #define MSG_AUTO_HOME                       _UxGT("Aja referenssiin")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibroi Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Click to Begin")
 #define MSG_LEVEL_BED_DONE                  _UxGT("Leveling Done!")

Marlin/src/lcd/language/language_fr.h

@@ -46,7 +46,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Origine X Auto.")
 #define MSG_AUTO_HOME_Y                     _UxGT("Origine Y Auto.")
 #define MSG_AUTO_HOME_Z                     _UxGT("Origine Z Auto.")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrer Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Origine XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Clic pour commencer")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Point suivant")

Marlin/src/lcd/language/language_gl.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Ir orixe X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Ir orixe Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Ir orixe Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrar Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Ir orixes XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Prema pulsador")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Seguinte punto")

Marlin/src/lcd/language/language_hr.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Home-aj X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Home-aj Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home-aj Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibriraj Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Home-aj XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Klikni za početak")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Sljedeća točka")

Marlin/src/lcd/language/language_it.h

@@ -49,7 +49,6 @@
 #define MSG_AUTO_HOME_Y                     _UxGT("Home asse Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home asse Z")
 #define MSG_AUTO_Z_ALIGN                    _UxGT("Allineam.automat. Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibra Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Home assi XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Premi per iniziare")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Punto successivo")

Marlin/src/lcd/language/language_jp-kana.h

@@ -50,7 +50,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Xジク ゲンテンフッキ")             // "Home X"
 #define MSG_AUTO_HOME_Y                     _UxGT("Yジク ゲンテンフッキ")             // "Home Y"
 #define MSG_AUTO_HOME_Z                     _UxGT("Zジク ゲンテンフッキ")             // "Home Z"
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Zジク コウセイ")
 #define MSG_LEVEL_BED_HOMING                _UxGT("ゲンテンフッキチュウ")              // "Homing XYZ"
 #define MSG_LEVEL_BED_WAITING               _UxGT("レベリングカイシ")                // "Click to Begin"
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("ツギノソクテイテンヘ")             // "Next Point"

Marlin/src/lcd/language/language_ko_KR.h

@@ -48,7 +48,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("X 홈으로")
 #define MSG_AUTO_HOME_Y                     _UxGT("Y 홈으로")
 #define MSG_AUTO_HOME_Z                     _UxGT("Z 홈으로")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Z 캘리브레이션")
 #define MSG_LEVEL_BED_HOMING                _UxGT("XYZ 홈으로")
 #define MSG_LEVEL_BED_WAITING               _UxGT("누르면 시작합니다")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("다음 Point")

Marlin/src/lcd/language/language_nl.h

@@ -46,7 +46,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Home X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibreer Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Homing XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Klik voor begin")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Volgende Plaats")

Marlin/src/lcd/language/language_pl.h

@@ -40,7 +40,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Zeruj X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Zeruj Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Zeruj Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibruj Z")
 #define MSG_LEVEL_BED                       _UxGT("Poziom. stołu")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Pozycja zerowa")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Kliknij by rozp.")

Marlin/src/lcd/language/language_pt-br.h

@@ -54,7 +54,6 @@
 #define MSG_AUTO_HOME_Y                     _UxGT("Ir na origem Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Ir na origem Z")
 #define MSG_AUTO_Z_ALIGN                    _UxGT("Auto alinhar Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrar Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Indo para origem")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Clique para Iniciar")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Próximo Ponto")

Marlin/src/lcd/language/language_pt.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Ir para origem X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Ir para origem Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Ir para origem Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Calibrar Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Indo para origem")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Click para iniciar")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Próximo ponto")

Marlin/src/lcd/language/language_ru.h

@@ -47,7 +47,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Парковка X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Парковка Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Парковка Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Калибровать Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Нулевое положение")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Нажмите чтобы начать")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Следующая точка")

Marlin/src/lcd/language/language_sk.h

@@ -57,7 +57,6 @@
 #define MSG_AUTO_HOME_Y                     _UxGT("Domov os Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Domov os Z")
 #define MSG_AUTO_Z_ALIGN                    _UxGT("Auto-zarovn. Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibrovať Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Parkovanie XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Kliknutím spusťte")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Ďalší bod")

Marlin/src/lcd/language/language_tr.h

@@ -55,7 +55,6 @@
 #define MSG_AUTO_HOME_Y                     _UxGT("Y Sıfırla")
 #define MSG_AUTO_HOME_Z                     _UxGT("Z Sıfırla")
 #define MSG_AUTO_Z_ALIGN                    _UxGT("Oto. Z-Hizalama")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Z Ayarla")
 #define MSG_LEVEL_BED_HOMING                _UxGT("XYZ Sıfırlanıyor")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Başlatmak için tıkla")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Sonraki Nokta")

Marlin/src/lcd/language/language_uk.h

@@ -43,7 +43,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("Паркування X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Паркування Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Паркування Z")
-#define MSG_TMC_Z_CALIBRATION               _UxGT("Калібрування Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Паркування XYZ")
 #define MSG_LEVEL_BED_WAITING               _UxGT("Почати")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Слідуюча Точка")

Marlin/src/lcd/language/language_zh_CN.h

@@ -45,7 +45,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("回X原位")  //"Home X"
 #define MSG_AUTO_HOME_Y                     _UxGT("回Y原位")  //"Home Y"
 #define MSG_AUTO_HOME_Z                     _UxGT("回Z原位")  //"Home Z"
-#define MSG_TMC_Z_CALIBRATION               _UxGT("⊿校准Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("平台调平XYZ归原位")  //"Homing XYZ"
 #define MSG_LEVEL_BED_WAITING               _UxGT("单击开始热床调平")  //"Click to Begin"
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("下个热床调平点")  //"Next Point"

Marlin/src/lcd/language/language_zh_TW.h

@@ -45,7 +45,6 @@
 #define MSG_AUTO_HOME_X                     _UxGT("回X原點")  //"Home X"
 #define MSG_AUTO_HOME_Y                     _UxGT("回Y原點")  //"Home Y"
 #define MSG_AUTO_HOME_Z                     _UxGT("回Z原點")  //"Home Z"
-#define MSG_TMC_Z_CALIBRATION               _UxGT("⊿校準Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("平台調平XYZ歸原點")  //"Homing XYZ"
 #define MSG_LEVEL_BED_WAITING               _UxGT("單擊開始熱床調平")  //"Click to Begin"
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("下個熱床調平點")  //"Next Point"

Marlin/src/lcd/menu/menu_motion.cpp

@@ -453,13 +453,6 @@ void menu_motion() {
   #endif
 
   //
-  // TMC Z Calibration
-  //
-  #if ENABLED(TMC_Z_CALIBRATION)
-    MENU_ITEM(gcode, MSG_TMC_Z_CALIBRATION, PSTR("G28\nM915"));
-  #endif
-
-  //
   // Level Bed
   //
   #if ENABLED(AUTO_BED_LEVELING_UBL)