Note 5 extruders in config comments

Marlin/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

Marlin/example_configurations/Cartesio/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.128, 71.128, 640, 152 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 20, 20 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 100, 10000 }
 

Marlin/example_configurations/Felix/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 76.190476, 76.190476, 1600, 164 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 5000, 5000, 100, 80000 }
 

Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 52.2 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 17 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 4, 750 }
 

Marlin/example_configurations/Hephestos/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100.47095761381482 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 3.3, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1100, 1100, 100, 10000 }
 

Marlin/example_configurations/Hephestos_2/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 160, 160, 8000, 204 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 250, 250, 2, 200 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 20, 1000 }
 

Marlin/example_configurations/K8200/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 64.25, 64.25, 2560, 600 }
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

Marlin/example_configurations/K8400/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

Marlin/example_configurations/K8400/Dual-head/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 134.74, 134.74, 4266.66, 148.7 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 160, 160, 10, 10000 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

Marlin/example_configurations/RigidBot/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
  // default steps per unit for RigidBot with standard hardware
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 44.3090, 22.1545, 1600, 53.5 }
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 100, 10000 }
 

Marlin/example_configurations/SCARA/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 103.69, 106.65, 200/1.25, 1000 }  // default steps per unit for SCARA
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 30, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 300, 300, 20, 1000 }
 

Marlin/example_configurations/TAZ4/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100.5, 100.5, 400, 850 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 800, 800, 8, 50 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

Marlin/example_configurations/TinyBoy2/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 6400, 88.16 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 7, 35 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

Marlin/example_configurations/WITBOX/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 600.0*8/3, 102.073 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 350, 350, 7.2, 80 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1000, 1000, 10, 1000 }
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 100 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 4000, 4000, 4000, 4000 }
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 100, 90 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 200 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 4000, 4000, 4000, 4000 }
 

Marlin/example_configurations/delta/generic/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 80, 760*1.1 }  // default steps per unit for Kossel (GT2, 20 tooth)
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 500, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 184.8 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 200 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 9000 }
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { XYZ_STEPS, XYZ_STEPS, XYZ_STEPS, 158 }   // default steps per unit for PowerWasp
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 200, 200, 200, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 9000, 10000 }
 

Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 96 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 25, 25 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 800, 800, 700, 10000 }
 

Marlin/example_configurations/makibox/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 400, 400, 400, 163 }     // default steps per unit for ***** MakiBox A6 *****
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 60, 60, 20, 45 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 2000, 2000, 30, 10000 }
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.1, 71.1, 2560, 600 } // David TVRR
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 45 } // David TVRR
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 

Marlin/example_configurations/wt150/Configuration.h

 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 71.699959, 71.699959, 71.699959, 100.470955 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_FEEDRATE          { 83.333333, 83.333333, 19.5, 26.666666 }
 
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2[, E3]]]
+ *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
 #define DEFAULT_MAX_ACCELERATION      { 1200, 1200, 100, 10000 }