Tweak config spaces

Marlin/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/default/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Alfawise/U20/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/A2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/A2plus/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/A6/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/A8/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/A8plus/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Anet/E16/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/ArmEd/Configuration_adv.h

@@ -730,8 +730,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Cartesio/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-10/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-20/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/CR-8/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Einstart-S/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Felix/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -730,8 +730,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -730,8 +730,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/A10/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/HMS434/Configuration_adv.h

@@ -718,8 +718,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/JGAurora/A1/Configuration_adv.h

@@ -731,8 +731,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/JGAurora/A5/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -731,8 +731,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/MakerParts/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Malyan/M150/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Malyan/M200/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Mks/Robin/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Mks/Sbase/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/RigidBot/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/SCARA/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Sanguinololu/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -722,8 +722,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/TheBorg/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/TinyBoy2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/VORONDesign/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Velleman/K8200/Configuration_adv.h

@@ -739,8 +739,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Velleman/K8400/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h

@@ -726,8 +726,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/Dreammaker/Overlord/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/generic/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -727,8 +727,8 @@
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0} // mm
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0} // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.