Merge pull request #1970 from thinkyhead/rename_files

Rename files to move them in the IDE

Marlin/Makefile

 CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp	\
 	MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp	\
 	SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp		\
-	stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp \
-	watchdog.cpp SPI.cpp Servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
+	stepper.cpp temperature.cpp cardreader.cpp configuration_store.cpp \
+	watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
 	vector_3.cpp qr_solve.cpp
 ifeq ($(LIQUID_TWI2), 0)
 CXXSRC += LiquidCrystal.cpp

Marlin/Marlin_main.cpp

 #include "motion_control.h"
 #include "cardreader.h"
 #include "watchdog.h"
-#include "ConfigurationStore.h"
+#include "configuration_store.h"
 #include "language.h"
 #include "pins_arduino.h"
 #include "math.h"
 
 #ifdef BLINKM
-  #include "BlinkM.h"
+  #include "blinkm.h"
   #include "Wire.h"
 #endif
 
 #if NUM_SERVOS > 0
-  #include "Servo.h"
+  #include "servo.h"
 #endif
 
 #if HAS_DIGIPOTSS
     if (code_seen('Z')) {
       value = code_value();
       if (Z_PROBE_OFFSET_RANGE_MIN <= value && value <= Z_PROBE_OFFSET_RANGE_MAX) {
-        zprobe_zoffset = -value; // compare w/ line 278 of ConfigurationStore.cpp
+        zprobe_zoffset = -value; // compare w/ line 278 of configuration_store.cpp
         SERIAL_ECHO_START;
         SERIAL_ECHOLNPGM(MSG_ZPROBE_ZOFFSET " " MSG_OK);
         SERIAL_EOL;

Marlin/Servo.cpp

 /*
- Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
+ servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
  Copyright (c) 2009 Michael Margolis.  All right reserved.
 
  This library is free software; you can redistribute it and/or
 #include <avr/interrupt.h>
 #include <Arduino.h>
 
-#include "Servo.h"
+#include "servo.h"
 
 #define usToTicks(_us)    (( clockCyclesPerMicrosecond()* _us) / 8)     // converts microseconds to tick (assumes prescale of 8)  // 12 Aug 2009
 #define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds

Marlin/Servo.h

 /*
-  Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
+  servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
   Copyright (c) 2009 Michael Margolis.  All right reserved.
 
   This library is free software; you can redistribute it and/or
    detach()    - Stops an attached servos from pulsing its i/o pin.
  */
 
-#ifndef Servo_h
-#define Servo_h
+#ifndef servo_h
+#define servo_h
 
 #include <inttypes.h>
 

Marlin/BlinkM.cpp → Marlin/blinkm.cpp

 /*
-  BlinkM.cpp - Library for controlling a BlinkM over i2c
+  blinkm.cpp - Library for controlling a BlinkM over i2c
   Created by Tim Koster, August 21 2013.
 */
 #include "Marlin.h"
 #ifdef BLINKM
 
-#include "BlinkM.h"
+#include "blinkm.h"
 
 void SendColors(byte red, byte grn, byte blu) {
   Wire.begin(); 

Marlin/BlinkM.h → Marlin/blinkm.h

 /*
-  BlinkM.h
+  blinkm.h
   Library header file for BlinkM library
  */
 #if ARDUINO >= 100

Marlin/ConfigurationStore.cpp → Marlin/configuration_store.cpp

 /**
- * ConfigurationStore.cpp
+ * configuration_store.cpp
  *
  * Configuration and EEPROM storage
  *
 #include "planner.h"
 #include "temperature.h"
 #include "ultralcd.h"
-#include "ConfigurationStore.h"
+#include "configuration_store.h"
 
 #ifdef MESH_BED_LEVELING
    #include "mesh_bed_leveling.h"

Marlin/ConfigurationStore.h → Marlin/configuration_store.h

-#ifndef CONFIGURATIONSTORE_H
-#define CONFIGURATIONSTORE_H
+#ifndef CONFIGURATION_STORE_H
+#define CONFIGURATION_STORE_H
 
 #include "Configuration.h"
 
   FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
 #endif
 
-#endif //CONFIGURATIONSTORE_H
+#endif //CONFIGURATION_STORE_H

Marlin/dogm_lcd_implementation.h

 #endif
 
 #include <U8glib.h>
-#include "DOGMbitmaps.h"
+#include "dogm_bitmaps.h"
 
 #include "ultralcd.h"
 #include "ultralcd_st7920_u8glib_rrd.h"

Marlin/pins_SAV_MKI.h

   #define HOME_PIN          -1 // A4 = marlin 44 - teensy = 42
 
   #ifdef NUM_SERVOS
-    #define SERVO0_PIN       41 // In teensy's pin definition for pinMode (in Servo.cpp)
+    #define SERVO0_PIN       41 // In teensy's pin definition for pinMode (in servo.cpp)
   #endif
 
 #endif // SAV_3DLCD

Marlin/ultralcd.cpp

 #include "cardreader.h"
 #include "temperature.h"
 #include "stepper.h"
-#include "ConfigurationStore.h"
+#include "configuration_store.h"
 
 int8_t encoderDiff; /* encoderDiff is updated from interrupt context and added to encoderPosition every LCD update */