Fix and update DGUS displays (#17072)

Marlin/Configuration_adv.h

@@ -1288,7 +1288,7 @@
 // Additional options for DGUS / DWIN displays
 //
 #if HAS_DGUS_LCD
-  #define DGUS_SERIAL_PORT 2
+  #define DGUS_SERIAL_PORT 3
   #define DGUS_BAUDRATE 115200
 
   #define DGUS_RX_BUFFER_SIZE 128

Marlin/src/inc/Conditionals_LCD.h

@@ -356,11 +356,12 @@
   #endif
 #endif
 
-// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
+// Aliases for LCD features
 #if ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
   #define HAS_DGUS_LCD 1
 #endif
 
+// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
 #if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE)
   #define IS_EXTUI
   #define EXTENSIBLE_UI

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp

@@ -179,6 +179,15 @@ void DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable
   }
 }
 
+// Send the current print progress to the display.
+void DGUSScreenVariableHandler::DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var) {
+  //DEBUG_ECHOPAIR(" DGUSLCD_SendPrintProgressToDisplay ", var.VP);
+  uint16_t tmp = ExtUI::getProgress_percent();
+  //DEBUG_ECHOLNPAIR(" data ", tmp);
+  uint16_t data_to_send = swap16(tmp);
+  dgusdisplay.WriteVariable(var.VP, data_to_send);
+}
+
 // Send the current print time to the display.
 // It is using a hex display for that: It expects BSD coded data in the format xxyyzz
 void DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var) {
@@ -465,7 +474,7 @@ void DGUSScreenVariableHandler::ScreenConfirmedOK(DGUS_VP_Variable &var, void *v
 const uint16_t* DGUSLCD_FindScreenVPMapList(uint8_t screen) {
   const uint16_t *ret;
   const struct VPMapping *map = VPMap;
-  while (ret = (uint16_t*) pgm_read_word(&(map->VPList))) {
+  while (ret = (uint16_t*) pgm_read_ptr(&(map->VPList))) {
     if (pgm_read_byte(&(map->screen)) == screen) return ret;
     map++;
   }
@@ -846,8 +855,8 @@ void DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable
 void DGUSScreenVariableHandler::HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr) {
   DEBUG_ECHOLNPGM("HandleProbeOffsetZChanged");
 
-  uint16_t value = swap16(*(uint16_t*)val_ptr)/100;
-  ExtUI::setZOffset_mm(value);
+  const float offset = float(swap16(*(uint16_t*)val_ptr)) / 100.0f;
+  ExtUI::setZOffset_mm(offset);
   ScreenHandler.skipVP = var.VP; // don't overwrite value the next update time as the display might autoincrement in parallel
   return;
 }
@@ -858,7 +867,7 @@ void DGUSScreenVariableHandler::HandleProbeOffsetZChanged(DGUS_VP_Variable &var,
 
     int16_t flag = swap16(*(uint16_t*)val_ptr);
     int16_t steps = flag ? -20 : 20;
-    ExtUI::smartAdjustAxis_steps(steps,ExtUI::axis_t::Z,true);
+    ExtUI::smartAdjustAxis_steps(steps, ExtUI::axis_t::Z, true);
     ScreenHandler.ForceCompleteUpdate();
     return;
   }
@@ -1307,11 +1316,8 @@ void DGUSDisplay::ProcessRx() {
           //DEBUG_ECHOPAIR(" vp=", vp, " dlen=", dlen);
           DGUS_VP_Variable ramcopy;
           if (populate_VPVar(vp, &ramcopy)) {
-            if (!(dlen == ramcopy.size || (dlen == 2 && ramcopy.size == 1)))
-              DEBUG_ECHOLNPGM("SIZE MISMATCH");
-            else if (ramcopy.set_by_display_handler) {
+            if (ramcopy.set_by_display_handler)
               ramcopy.set_by_display_handler(ramcopy, &tmp[3]);
-            }
             else
               DEBUG_ECHOLNPGM(" VPVar found, no handler.");
           }

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h

@@ -26,6 +26,9 @@
 #include "../../../../inc/MarlinConfigPre.h"
 
 #include "../../../../MarlinCore.h"
+#if HAS_BED_PROBE
+  #include "../../../../module/probe.h"
+#endif
 #include "DGUSVPVariable.h"
 
 enum DGUSLCD_Screens : uint8_t;
@@ -140,8 +143,10 @@ public:
     // Hook for PID autotune
     static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr);
   #endif
-  // Hook for "Change probe offset z"
-  static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr);
+  #if HAS_BED_PROBE
+    // Hook for "Change probe offset z"
+    static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr);
+  #endif
   #if ENABLED(BABYSTEPPING)
     // Hook for live z adjust action
     static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr);
@@ -210,6 +215,7 @@ public:
   static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var);
   static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var);
   static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var);
+  static void DGUSLCD_SendPrintProgressToDisplay(DGUS_VP_Variable &var);
   static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var);
   #if ENABLED(PRINTCOUNTER)
     static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var);

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp

@@ -213,6 +213,7 @@ const uint16_t VPList_SDPrintTune[] PROGMEM = {
     VP_T_Bed_Is, VP_T_Bed_Set,
   #endif
   VP_Feedrate_Percentage,
+  VP_SD_Print_ProbeOffsetZ,
   0x0000
 };
 
@@ -279,6 +280,13 @@ const uint16_t VPList_FLCPrinting[] PROGMEM = {
   0x0000
 };
 
+const uint16_t VPList_Z_Offset[] PROGMEM = {
+  #if HOTENDS >= 1
+    VP_SD_Print_ProbeOffsetZ,
+  #endif
+  0x0000
+};
+
 const struct VPMapping VPMap[] PROGMEM = {
   { DGUSLCD_SCREEN_BOOT, VPList_Boot },
   { DGUSLCD_SCREEN_MAIN, VPList_Main },
@@ -297,6 +305,7 @@ const struct VPMapping VPMap[] PROGMEM = {
   { DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting },
   { DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat },
   { DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting },
+  { DGUSLCD_SCREEN_Z_OFFSET, VPList_Z_Offset },
   { DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM },
   { DGUSLCD_SCREEN_PID_E, VPList_PIDE0 },
   { DGUSLCD_SCREEN_PID_BED, VPList_PIDBED },
@@ -418,9 +427,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-    VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
-  #endif
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintProgressToDisplay ),
 
   // Print Time
   VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay),

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h

@@ -43,7 +43,8 @@ enum DGUSLCD_Screens : uint8_t {
   DGUSLCD_SCREEN_STEPPERMM           = 212,
   DGUSLCD_SCREEN_PID_E               = 214,
   DGUSLCD_SCREEN_PID_BED             = 218,
-  DGUSLCD_SCREEN_INFOS               =  30,
+  DGUSLCD_SCREEN_Z_OFFSET            = 222,
+  DGUSLCD_SCREEN_INFOS               =  36,
   DGUSLCD_SCREEN_CONFIRM             = 240,
   DGUSLCD_SCREEN_KILL                = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
   DGUSLCD_SCREEN_WAITING             = 251,
@@ -121,8 +122,8 @@ constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180;
 // Fan Control Buttons , switch between "off" and "on"
 constexpr uint16_t VP_FAN0_CONTROL = 0x2200;
 constexpr uint16_t VP_FAN1_CONTROL = 0x2202;
-//constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
-//constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
+constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
+constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
 
 // Heater Control Buttons , triged between "cool down" and "heat PLA" state
 constexpr uint16_t VP_E0_CONTROL = 0x2210;
@@ -240,8 +241,8 @@ constexpr uint16_t VP_SD_Print_Filename = 0x32C0;
 // Fan status
 constexpr uint16_t VP_FAN0_STATUS = 0x3300;
 constexpr uint16_t VP_FAN1_STATUS = 0x3302;
-//constexpr uint16_t VP_FAN2_STATUS = 0x3304;
-//constexpr uint16_t VP_FAN3_STATUS = 0x3306;
+constexpr uint16_t VP_FAN2_STATUS = 0x3304;
+constexpr uint16_t VP_FAN3_STATUS = 0x3306;
 
 // Heater status
 constexpr uint16_t VP_E0_STATUS = 0x3310;

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp

@@ -418,9 +418,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-    VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
-  #endif
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintProgressToDisplay ),
 
   // Print Time
   VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ),

Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.cpp

@@ -250,9 +250,7 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
 
   // Print Progress
-  #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-    VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
-  #endif
+  VPHELPER(VP_PrintProgress_Percentage, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintProgressToDisplay ),
 
   // Print Time
   VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ),