LCD_FOR_MELZI

Marlin/Conditionals_LCD.h

@@ -120,7 +120,7 @@
     #define ULTIMAKERCONTROLLER
   #endif
 
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI)
     #define DOGLCD
     #define U8GLIB_ST7920
     #define REPRAP_DISCOUNT_SMART_CONTROLLER

Marlin/Configuration.h

@@ -1403,6 +1403,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/SanityCheck.h

@@ -1086,6 +1086,9 @@ static_assert(1 >= 0
   #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
     + 1
   #endif
+  #if ENABLED(LCD_FOR_MELZI)
+    + 1
+  #endif
   #if ENABLED(CARTESIO_UI)
     + 1
   #endif

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1561,6 +1561,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -1411,6 +1411,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/CL-260/Configuration.h

@@ -1400,6 +1400,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1397,6 +1397,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Felix/Configuration.h

@@ -1381,6 +1381,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1381,6 +1381,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h

@@ -1403,6 +1403,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Hephestos/Configuration.h

@@ -1389,6 +1389,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -1392,6 +1392,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/Infitary-i3-M508/Configuration.h

@@ -1373,6 +1373,11 @@
 //#define BQ_LCD_SMART_CONTROLLER
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/K8200/Configuration.h

@@ -1431,6 +1431,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/K8400/Configuration.h

@@ -1399,6 +1399,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -1399,6 +1399,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/M150/Configuration.h

@@ -1426,6 +1426,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -1399,6 +1399,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1399,6 +1399,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/SCARA/Configuration.h

@@ -1411,6 +1411,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/TAZ4/Configuration.h

@@ -1418,6 +1418,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1455,6 +1455,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/WITBOX/Configuration.h

@@ -1389,6 +1389,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -1399,6 +1399,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1520,6 +1520,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1521,6 +1521,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1510,6 +1510,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1513,6 +1513,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1518,6 +1518,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1576,6 +1576,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h

@@ -1415,6 +1415,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/makibox/Configuration.h

@@ -1402,6 +1402,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1394,6 +1394,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/example_configurations/wt150/Configuration.h

@@ -1405,6 +1405,11 @@
                                   // different pins/wiring (see pins_ANET_10.h).
 
 //
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
 // CONTROLLER TYPE: I2C
 //
 // Note: These controllers require the installation of Arduino's LiquidCrystal_I2C

Marlin/pins_SANGUINOLOLU_11.h

@@ -209,16 +209,39 @@
   #define BTN_EN2               10
 
   #if ENABLED(LCD_I2C_PANELOLU2)
+
     #if IS_MELZI
       #define BTN_ENC           29
       #define LCD_SDSS          30 // Panelolu2 SD card reader rather than the Melzi
     #else
       #define BTN_ENC           30
     #endif
-  #else  // !Panelolu2
+
+  #elif ENABLED(LCD_FOR_MELZI)
+
+    #define LCD_PINS_RS         17
+    #define LCD_PINS_ENABLE     16
+    #define LCD_PINS_D4         11
+    #define BTN_ENC             28
+    #define BTN_EN1             29
+    #define BTN_EN2             30
+
+    #ifndef ST7920_DELAY_1
+      #define ST7920_DELAY_1 DELAY_0_NOP
+    #endif
+    #ifndef ST7920_DELAY_3
+      #define ST7920_DELAY_2 DELAY_3_NOP
+    #endif
+    #ifndef ST7920_DELAY_3
+      #define ST7920_DELAY_3 DELAY_0_NOP
+    #endif
+
+  #else  // !LCD_I2C_PANELOLU2 && !LCD_FOR_MELZI
+
     #define BTN_ENC             16
     #define LCD_SDSS            28 // Smart Controller SD card reader rather than the Melzi
-  #endif // !Panelolu2
+
+  #endif
 
   #define SD_DETECT_PIN         -1