Tweak NOZZLE_CLEAN_START_POINT spacing

Marlin/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/default/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1550,7 +1550,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -1520,7 +1520,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -1520,7 +1520,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1539,7 +1539,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -1599,7 +1599,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Alfawise/U20/Configuration.h

@@ -1598,7 +1598,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/AliExpress/CL-260/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1530,7 +1530,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/A2/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/A2plus/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/A6/Configuration.h

@@ -1670,7 +1670,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/A8/Configuration.h

@@ -1532,7 +1532,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/A8plus/Configuration.h

@@ -1530,7 +1530,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Anet/E16/Configuration.h

@@ -1531,7 +1531,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/AnyCubic/i3/Configuration.h

@@ -1529,7 +1529,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/ArmEd/Configuration.h

@@ -1520,7 +1520,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Azteeg/X5GT/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/BQ/Hephestos/Configuration.h

@@ -1507,7 +1507,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/BQ/WITBOX/Configuration.h

@@ -1507,7 +1507,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Cartesio/Configuration.h

@@ -1518,7 +1518,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-10/Configuration.h

@@ -1529,7 +1529,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-10S/Configuration.h

@@ -1520,7 +1520,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-10_5S/Configuration.h

@@ -1522,7 +1522,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-10mini/Configuration.h

@@ -1538,7 +1538,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -1522,7 +1522,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-20/Configuration.h

@@ -1522,7 +1522,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/CR-8/Configuration.h

@@ -1529,7 +1529,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/Ender-2/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/Ender-3/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/Ender-4/Configuration.h

@@ -1529,7 +1529,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Creality/Ender-5/Configuration.h

@@ -1522,7 +1522,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Einstart-S/Configuration.h

@@ -1529,7 +1529,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/AIO_II/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/Cheetah 1.2/base/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/Cheetah/base/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FYSETC/F6_13/Configuration.h

@@ -1521,7 +1521,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Felix/Configuration.h

@@ -1501,7 +1501,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Felix/DUAL/Configuration.h

@@ -1501,7 +1501,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -1510,7 +1510,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -1525,7 +1525,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Formbot/Raptor/Configuration.h

@@ -1624,7 +1624,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -1553,7 +1553,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -1544,7 +1544,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/A10/Configuration.h

@@ -1504,7 +1504,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/A10M/Configuration.h

@@ -1504,7 +1504,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/A20M/Configuration.h

@@ -1503,7 +1503,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/GT2560/Configuration.h

@@ -1534,7 +1534,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -1526,7 +1526,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -1540,7 +1540,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -1539,7 +1539,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Infitary/i3-M508/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/JGAurora/A1/Configuration.h

@@ -1526,7 +1526,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/JGAurora/A5/Configuration.h

@@ -1531,7 +1531,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/JGAurora/A5S/Configuration.h

@@ -1526,7 +1526,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/MakerParts/Configuration.h

@@ -1539,7 +1539,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Malyan/M150/Configuration.h

@@ -1547,7 +1547,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Malyan/M200/Configuration.h

@@ -1518,7 +1518,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Micromake/C1/basic/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Mks/Robin/Configuration.h

@@ -1520,7 +1520,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Mks/Sbase/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -1527,7 +1527,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/RapideLite/RL200/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/RepRapPro/Huxley/Configuration.h

@@ -1568,7 +1568,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/RigidBot/Configuration.h

@@ -1517,7 +1517,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/SCARA/Configuration.h

@@ -1528,7 +1528,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/STM32/STM32F103R/Configuration.h

@@ -1521,7 +1521,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/STM32/STM32F4/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -1521,7 +1521,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Sanguinololu/Configuration.h

@@ -1550,7 +1550,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tevo/Michelangelo/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tevo/Tarantula Pro/Configuration.h

@@ -1517,7 +1517,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h

@@ -1524,7 +1524,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/TheBorg/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/TinyBoy2/Configuration.h

@@ -1575,7 +1575,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tronxy/X1/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tronxy/X3A/Configuration.h

@@ -1523,7 +1523,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tronxy/X5S-2E/Configuration.h

@@ -1540,7 +1540,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tronxy/X5S/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Tronxy/XY100/Configuration.h

@@ -1530,7 +1530,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/UltiMachine/Archim1/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/UltiMachine/Archim2/Configuration.h

@@ -1519,7 +1519,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/VORONDesign/Configuration.h

@@ -1528,7 +1528,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius

config/examples/Velleman/K8200/Configuration.h

@@ -1549,7 +1549,7 @@
   #define NOZZLE_CLEAN_TRIANGLES  3
 
   // Specify positions as { X, Y, Z }
-  #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+  #define NOZZLE_CLEAN_START_POINT {  30, 30, (Z_MIN_POS + 1) }
   #define NOZZLE_CLEAN_END_POINT   { 100, 60, (Z_MIN_POS + 1) }
 
   // Circular pattern radius