universalize axis_unhomed_error()

Marlin/Marlin_main.cpp

@@ -1723,17 +1723,30 @@ static void clean_up_after_endstop_or_probe_move() {
 #endif //HAS_BED_PROBE
 
 #if ENABLED(Z_PROBE_SLED) || ENABLED(Z_SAFE_HOMING) || HAS_PROBING_PROCEDURE
-  static void axis_unhomed_error(bool xyz=false) {
-    if (xyz) {
-      LCD_MESSAGEPGM(MSG_XYZ_UNHOMED);
+  static bool axis_unhomed_error(const bool x, const bool y, const bool z) {
+    const bool xx = x && !axis_homed[X_AXIS],
+               yy = y && !axis_homed[Y_AXIS],
+               zz = z && !axis_homed[Z_AXIS];
+    if (xx || yy || zz) {
       SERIAL_ECHO_START;
-      SERIAL_ECHOLNPGM(MSG_XYZ_UNHOMED);
-    }
-    else {
-      LCD_MESSAGEPGM(MSG_YX_UNHOMED);
-      SERIAL_ECHO_START;
-      SERIAL_ECHOLNPGM(MSG_YX_UNHOMED);
+      SERIAL_ECHOPGM(MSG_HOME " ");
+      if (xx) SERIAL_ECHOPGM(MSG_X);
+      if (yy) SERIAL_ECHOPGM(MSG_Y);
+      if (zz) SERIAL_ECHOPGM(MSG_Z);
+      SERIAL_ECHOLNPGM(" " MSG_FIRST);
+
+      #if ENABLED(ULTRA_LCD)
+        char message[3 * (LCD_WIDTH) + 1] = ""; // worst case is kana.utf with up to 3*LCD_WIDTH+1
+        strcat_P(message, PSTR(MSG_HOME " "));
+        if (xx) strcat_P(message, PSTR(MSG_X));
+        if (yy) strcat_P(message, PSTR(MSG_Y));
+        if (zz) strcat_P(message, PSTR(MSG_Z));
+        strcat_P(message, PSTR(" " MSG_FIRST));
+        lcd_setstatus(message);
+      #endif
+      return true;
     }
+    return false;
   }
 #endif
 
@@ -1757,10 +1770,7 @@ static void clean_up_after_endstop_or_probe_move() {
       }
     #endif
 
-    if (!axis_homed[X_AXIS]) {
-      axis_unhomed_error(true);
-      return;
-    }
+    if (axis_unhomed_error(true, false, false)) return;
 
     float oldXpos = current_position[X_AXIS]; // save x position
 
@@ -3000,32 +3010,27 @@ inline void gcode_G28() {
           else if (homeZ) { // Don't need to Home Z twice
 
             // Let's see if X and Y are homed
-            if (axis_homed[X_AXIS] && axis_homed[Y_AXIS]) {
-
-              /**
-               * Make sure the Z probe is within the physical limits
-               * NOTE: This doesn't necessarily ensure the Z probe is also
-               * within the bed!
-               */
-              float cpx = current_position[X_AXIS], cpy = current_position[Y_AXIS];
-              if (   cpx >= X_MIN_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
-                  && cpx <= X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
-                  && cpy >= Y_MIN_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)
-                  && cpy <= Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)) {
-
-                // Home the Z axis
-                HOMEAXIS(Z);
-              }
-              else {
-                LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
-                SERIAL_ECHO_START;
-                SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT);
-              }
+            if (axis_unhomed_error(true, true, false)) return;
+
+            /**
+             * Make sure the Z probe is within the physical limits
+             * NOTE: This doesn't necessarily ensure the Z probe is also
+             * within the bed!
+             */
+            float cpx = current_position[X_AXIS], cpy = current_position[Y_AXIS];
+            if (   cpx >= X_MIN_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
+                && cpx <= X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
+                && cpy >= Y_MIN_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)
+                && cpy <= Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)) {
+
+              // Home the Z axis
+              HOMEAXIS(Z);
             }
             else {
-              axis_unhomed_error();
+              LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
+              SERIAL_ECHO_START;
+              SERIAL_ECHOLNPGM(MSG_ZPROBE_OUT);
             }
-
           } // !home_all_axes && homeZ
 
           #if ENABLED(DEBUG_LEVELING_FEATURE)
@@ -3366,10 +3371,7 @@ inline void gcode_G28() {
     #endif
 
     // Don't allow auto-leveling without homing first
-    if (!axis_homed[X_AXIS] || !axis_homed[Y_AXIS] || !axis_homed[Z_AXIS]) {
-      axis_unhomed_error(true);
-      return;
-    }
+    if (axis_unhomed_error(true, true, true)) return;
 
     int verbose_level = code_seen('V') ? code_value_int() : 1;
     if (verbose_level < 0 || verbose_level > 4) {
@@ -4121,10 +4123,7 @@ inline void gcode_M42() {
    */
   inline void gcode_M48() {
 
-    if (!axis_homed[X_AXIS] || !axis_homed[Y_AXIS] || !axis_homed[Z_AXIS]) {
-      axis_unhomed_error(true);
-      return;
-    }
+    if (axis_unhomed_error(true, true, true)) return;
 
     int8_t verbose_level = code_seen('V') ? code_value_byte() : 1;
     if (verbose_level < 0 || verbose_level > 4) {

Marlin/language_an.h

@@ -142,7 +142,8 @@
 #define MSG_INIT_SDCARD                     "Encetan. tarcheta"
 #define MSG_CNG_SDCARD                      "Cambiar tarcheta"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y before Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_bg.h

@@ -143,7 +143,8 @@
 #define MSG_INIT_SDCARD                     "Иниц. SD-Карта"
 #define MSG_CNG_SDCARD                      "Смяна SD-Карта"
 #define MSG_ZPROBE_OUT                      "Z-сондата е извадена"
-#define MSG_YX_UNHOMED                      "Задайте X/Y преди Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Отстояние"
 #define MSG_BABYSTEP_X                      "Министъпка X"
 #define MSG_BABYSTEP_Y                      "Министъпка Y"

Marlin/language_ca.h

@@ -143,7 +143,8 @@
 #define MSG_INIT_SDCARD                     "Iniciant SD"
 #define MSG_CNG_SDCARD                      "Canviar SD"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y abans Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_cn.h

@@ -142,7 +142,8 @@
 #define MSG_INIT_SDCARD                     "Init. SD card"
 #define MSG_CNG_SDCARD                      "Change SD card"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y before Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_cz.h

@@ -174,8 +174,8 @@
 #define MSG_INIT_SDCARD                     "Nacist SD kartu"
 #define MSG_CNG_SDCARD                      "Vymenit SD kartu"
 #define MSG_ZPROBE_OUT                      "Sonda Z mimo podl"
-#define MSG_YX_UNHOMED                      "Domu X/Y pred Z"
-#define MSG_XYZ_UNHOMED                     "Domu XYZ prvni"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z ofset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_da.h

@@ -170,8 +170,8 @@
 #define MSG_INIT_SDCARD                     "Init. SD card"
 #define MSG_CNG_SDCARD                      "Skift SD kort"
 #define MSG_ZPROBE_OUT                      "Probe udenfor plade"
-#define MSG_YX_UNHOMED                      "Home X/Y før Z"
-#define MSG_XYZ_UNHOMED                     "Home XYZ first"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_de.h

@@ -145,7 +145,8 @@
 #define MSG_INIT_SDCARD                     "SD-Karte erkennen"  // Manually initialize the SD-card via user interface
 #define MSG_CNG_SDCARD                      "SD-Karte getauscht" // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
 #define MSG_ZPROBE_OUT                      "Sensor ausserhalb"
-#define MSG_YX_UNHOMED                      "X/Y vor Z homen!"
+#define MSG_HOME                            "Vorher"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "homen"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_en.h

@@ -445,11 +445,11 @@
 #ifndef MSG_ZPROBE_OUT
   #define MSG_ZPROBE_OUT                      "Z probe out. bed"
 #endif
-#ifndef MSG_YX_UNHOMED
-  #define MSG_YX_UNHOMED                      "Home X/Y before Z"
+#ifndef MSG_HOME
+  #define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #endif
-#ifndef MSG_XYZ_UNHOMED
-  #define MSG_XYZ_UNHOMED                     "Home XYZ first"
+#ifndef MSG_FIRST
+  #define MSG_FIRST                           "first"
 #endif
 #ifndef MSG_ZPROBE_ZOFFSET
   #define MSG_ZPROBE_ZOFFSET                  "Z Offset"

Marlin/language_es.h

@@ -169,8 +169,8 @@
 #define MSG_INIT_SDCARD                     "Iniciando tarjeta"
 #define MSG_CNG_SDCARD                      "Cambiar tarjeta"
 #define MSG_ZPROBE_OUT                      "Sonda Z fuera"
-#define MSG_YX_UNHOMED                      "Reiniciar X/Y y Z"
-#define MSG_XYZ_UNHOMED                     "Reiniciar XYZ"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Desfase Z"
 #define MSG_BABYSTEP_X                      "Micropaso X"
 #define MSG_BABYSTEP_Y                      "Micropaso Y"

Marlin/language_eu.h

@@ -142,7 +142,8 @@
 #define MSG_INIT_SDCARD                     "Hasieratu txartela"
 #define MSG_CNG_SDCARD                      "Aldatu txartela"
 #define MSG_ZPROBE_OUT                      "Z ohe hasiera"
-#define MSG_YX_UNHOMED                      "Posizio ezezaguna"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z konpentsatu"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_fi.h

@@ -142,7 +142,8 @@
 #define MSG_INIT_SDCARD                     "Init. SD-Card"
 #define MSG_CNG_SDCARD                      "Change SD-Card"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y before Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_fr.h

@@ -145,7 +145,8 @@
 #define MSG_INIT_SDCARD                     "Init. la carte SD"
 #define MSG_CNG_SDCARD                      "Changer de carte"
 #define MSG_ZPROBE_OUT                      "Z sonde exte. lit"
-#define MSG_YX_UNHOMED                      "Rev. dans XY av.Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Decalage Z"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_gl.h

@@ -170,8 +170,8 @@
 #define MSG_INIT_SDCARD                     "Iniciando SD"
 #define MSG_CNG_SDCARD                      "Cambiar SD"
 #define MSG_ZPROBE_OUT                      "Sonda-Z sen cama"
-#define MSG_YX_UNHOMED                      "X/Y antes que Z"
-#define MSG_XYZ_UNHOMED                     "Orixe XYZ antes"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Offset Z"
 #define MSG_BABYSTEP_X                      "Micropaso X"
 #define MSG_BABYSTEP_Y                      "Micropaso Y"

Marlin/language_hr.h

@@ -171,8 +171,8 @@
 #define MSG_INIT_SDCARD                     "Init. SD karticu"
 #define MSG_CNG_SDCARD                      "Promijeni SD karticu"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home-aj X/Y prije Z"
-#define MSG_XYZ_UNHOMED                     "Home-aj XYZ prvo"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_it.h

@@ -150,8 +150,8 @@
 #define MSG_INIT_SDCARD                     "Iniz. SD-Card"
 #define MSG_CNG_SDCARD                      "Cambia SD-Card"
 #define MSG_ZPROBE_OUT                      "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y prima di Z"
-#define MSG_XYZ_UNHOMED                     "Home XYZ prima"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_kana.h

@@ -184,6 +184,10 @@
 #define MSG_INIT_SDCARD                     "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0"                       // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card")
 #define MSG_CNG_SDCARD                      "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd"                               // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card")
 #define MSG_ZPROBE_OUT                      "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2"    // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed")
+
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
+/*
 #if LCD_WIDTH < 20
   #define MSG_YX_UNHOMED                    "\xbb\xb7\xc6X/Y\xa6\xcc\xaf\xb7\xbb\xbe\xd6"                                   // "ｻｷﾆX/Yｦﾌｯｷｻｾﾖ" ("Home X/Y before Z")
   #define MSG_XYZ_UNHOMED                   "\xbb\xb7\xc6\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7\xa6\xbe\xd6"                      // "ｻｷﾆｹﾞﾝﾃﾝﾌｯｷｦｾﾖ" ("Home XYZ first")
@@ -191,6 +195,7 @@
   #define MSG_YX_UNHOMED                    "\xbb\xb7\xc6X/Y\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2"               // "ｻｷﾆX/Yｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("Home X/Y before Z")
   #define MSG_XYZ_UNHOMED                   "\xbb\xb7\xc6\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7\xa6\xbc\xc3\xb8\xc0\xde\xbb\xb2"  // "ｻｷﾆｹﾞﾝﾃﾝﾌｯｷｦｼﾃｸﾀﾞｻｲ" ("Home XYZ first")
 #endif
+*/
 #define MSG_ZPROBE_ZOFFSET                  "Z\xb5\xcc\xbe\xaf\xc4"                                            // "Zｵﾌｾｯﾄ" ("Z Offset")
 #define MSG_BABYSTEP_X                      "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3"                            // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X")
 #define MSG_BABYSTEP_Y                      "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3"                            // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y")

Marlin/language_kana_utf8.h

@@ -155,8 +155,8 @@
 #define MSG_INIT_SDCARD                     "SDカードサイヨミコミ"             // "Init. SD card"
 #define MSG_CNG_SDCARD                      "SDカードコウカン"               // "Change SD card"
 #define MSG_ZPROBE_OUT                      "Zプローブ ベッドガイ"            // "Z probe out. bed"
-#define MSG_YX_UNHOMED                      "サキニX/Yヲフッキサセテクダサイ"    // "Home X/Y before Z"
-#define MSG_XYZ_UNHOMED                     "サキニゲンテンフッキヲシテクダサイ"   // "Home XYZ first"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Zオフセット"                   // "Z Offset"
 #define MSG_BABYSTEP_X                      "Xジク ビドウ"                  // "Babystep X"
 #define MSG_BABYSTEP_Y                      "Yジク ビドウ"                  // "Babystep Y"

Marlin/language_nl.h

@@ -144,7 +144,8 @@
 #define MSG_INIT_SDCARD                     "Init. SD kaart"
 #define MSG_CNG_SDCARD                      "Verv. SD Kaart"
 #define MSG_ZPROBE_OUT                      "Z probe uit. bed"
-#define MSG_YX_UNHOMED                      "Home X/Y voor Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
 #define MSG_BABYSTEP_X                      "Babystap X"
 #define MSG_BABYSTEP_Y                      "Babystap Y"

Marlin/language_pl.h

@@ -167,7 +167,8 @@
 #define MSG_INIT_SDCARD                     "Inicjal. karty SD"
 #define MSG_CNG_SDCARD                      "Zmiana karty SD"
 #define MSG_ZPROBE_OUT                      "Sonda Z za lozem"
-#define MSG_YX_UNHOMED                      "Wroc w XY przed Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Offset Z"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_pt-br.h

@@ -144,7 +144,8 @@
 #define MSG_INIT_SDCARD                     "Iniciar SD"
 #define MSG_CNG_SDCARD                      "Trocar SD"
 #define MSG_ZPROBE_OUT                      "Son. fora da mesa"
-#define MSG_YX_UNHOMED                      "Pos. Desconhecida"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Deslocamento no Z"
 #define MSG_BABYSTEP_X                      "Passinho X"
 #define MSG_BABYSTEP_Y                      "Passinho Y"

Marlin/language_pt-br_utf8.h

@@ -144,7 +144,8 @@
 #define MSG_INIT_SDCARD                     "Iniciar SD"
 #define MSG_CNG_SDCARD                      "Trocar SD"
 #define MSG_ZPROBE_OUT                      "Son. fora da mesa"
-#define MSG_YX_UNHOMED                      "Pos. Desconhecida"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Deslocamento no Z"
 #define MSG_BABYSTEP_X                      "Passinho X"
 #define MSG_BABYSTEP_Y                      "Passinho Y"

Marlin/language_pt.h

@@ -152,7 +152,8 @@
 #define MSG_INIT_SDCARD                     "Inici. cartao SD"
 #define MSG_CNG_SDCARD                      "Trocar cartao SD"
 #define MSG_ZPROBE_OUT                      "Sensor fora/base"
-#define MSG_YX_UNHOMED                      "XY antes de Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Desvio Z"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"

Marlin/language_pt_utf8.h

@@ -152,7 +152,8 @@
 #define MSG_INIT_SDCARD                     "Inici. cartão SD"
 #define MSG_CNG_SDCARD                      "Trocar cartão SD"
 #define MSG_ZPROBE_OUT                      "Sensor fora/base"
-#define MSG_YX_UNHOMED                      "XY antes de Z"
+#define MSG_HOME                            "Home"  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_FIRST                           "first"
 #define MSG_ZPROBE_ZOFFSET                  "Desvio Z"
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"