Преглед изворни кода

Update Chinese (TW) language (#17071)

Scott Lahteine пре 4 година
родитељ
комит
3a72b0fd41
No account linked to committer's email address
1 измењених фајлова са 247 додато и 30 уклоњено
  1. 247
    30
      Marlin/src/lcd/language/language_zh_TW.h

+ 247
- 30
Marlin/src/lcd/language/language_zh_TW.h Прегледај датотеку

@@ -35,11 +35,23 @@ namespace Language_zh_TW {
35 35
   PROGMEM Language_Str LANGUAGE                            = _UxGT("Traditional Chinese");
36 36
 
37 37
   PROGMEM Language_Str WELCOME_MSG                         = MACHINE_NAME _UxGT("已就緒.");     //" ready."
38
-  PROGMEM Language_Str MSG_BACK                            = _UxGT("返回");     // ”Back“
38
+  PROGMEM Language_Str MSG_MARLIN                          = _UxGT("Marlin");
39
+  PROGMEM Language_Str MSG_YES                             = _UxGT("是");  //"YES"
40
+  PROGMEM Language_Str MSG_NO                              = _UxGT("否");  //"NO"
41
+  PROGMEM Language_Str MSG_BACK                            = _UxGT("返回");     // "Back"
42
+  PROGMEM Language_Str MSG_MEDIA_ABORTING                  = _UxGT("正在中止...");   //"Aborting..."
39 43
   PROGMEM Language_Str MSG_MEDIA_INSERTED                  = _UxGT("記憶卡已插入");     //"Card inserted"
40 44
   PROGMEM Language_Str MSG_MEDIA_REMOVED                   = _UxGT("記憶卡被拔出");     //"Card removed"
45
+  PROGMEM Language_Str MSG_MEDIA_RELEASED                  = _UxGT("記憶卡被釋放");   //"Media Released"
46
+  PROGMEM Language_Str MSG_MEDIA_WAITING                   = _UxGT("等待記憶卡");    //"Waiting for media"
47
+  PROGMEM Language_Str MSG_MEDIA_READ_ERROR                = _UxGT("記憶卡讀取錯誤"); //"Media read error"
48
+  PROGMEM Language_Str MSG_MEDIA_USB_REMOVED               = _UxGT("USB裝置已移除");   //"USB device removed"
49
+  PROGMEM Language_Str MSG_MEDIA_USB_FAILED                = _UxGT("USB啟動失敗");  //"USB start failed"
41 50
   PROGMEM Language_Str MSG_LCD_ENDSTOPS                    = _UxGT("擋塊");     //"Endstops" // Max length 8 characters
51
+  PROGMEM Language_Str MSG_LCD_SOFT_ENDSTOPS               = _UxGT("軟體擋塊");    //"Soft Endstops"
42 52
   PROGMEM Language_Str MSG_MAIN                            = _UxGT("主選單");     //"Main"
53
+  PROGMEM Language_Str MSG_ADVANCED_SETTINGS               = _UxGT("進階設置");   //"Advanced Settings"
54
+  PROGMEM Language_Str MSG_CONFIGURATION                   = _UxGT("設置");    //Configuration
43 55
   PROGMEM Language_Str MSG_AUTOSTART                       = _UxGT("自動開始");     //"Autostart"
44 56
   PROGMEM Language_Str MSG_DISABLE_STEPPERS                = _UxGT("關閉步進馬達");     //"Disable steppers"
45 57
   PROGMEM Language_Str MSG_DEBUG_MENU                      = _UxGT("除錯選單");     // "Debug Menu"
@@ -48,6 +60,7 @@ namespace Language_zh_TW {
48 60
   PROGMEM Language_Str MSG_AUTO_HOME_X                     = _UxGT("回X原點");     //"Home X"
49 61
   PROGMEM Language_Str MSG_AUTO_HOME_Y                     = _UxGT("回Y原點");     //"Home Y"
50 62
   PROGMEM Language_Str MSG_AUTO_HOME_Z                     = _UxGT("回Z原點");     //"Home Z"
63
+  PROGMEM Language_Str MSG_AUTO_Z_ALIGN                    = _UxGT("自動Z對齊");   //"Auto Z-Align"
51 64
   PROGMEM Language_Str MSG_LEVEL_BED_HOMING                = _UxGT("平台調平XYZ歸原點");     //"Homing XYZ"
52 65
   PROGMEM Language_Str MSG_LEVEL_BED_WAITING               = _UxGT("單擊開始熱床調平");     //"Click to Begin"
53 66
   PROGMEM Language_Str MSG_LEVEL_BED_NEXT_POINT            = _UxGT("下個熱床調平點");     //"Next Point"
@@ -70,7 +83,17 @@ namespace Language_zh_TW {
70 83
   PROGMEM Language_Str MSG_PREHEAT_2_ALL                   = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 全部");     //MSG_PREHEAT_2 " All"
71 84
   PROGMEM Language_Str MSG_PREHEAT_2_BEDONLY               = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 熱床");     //MSG_PREHEAT_2 " Bed"
72 85
   PROGMEM Language_Str MSG_PREHEAT_2_SETTINGS              = _UxGT("預熱 ") PREHEAT_2_LABEL _UxGT(" 設置");     //MSG_PREHEAT_2 " conf"
86
+  PROGMEM Language_Str MSG_PREHEAT_CUSTOM                  = _UxGT("自定預熱");   //"Preheat Custom"
73 87
   PROGMEM Language_Str MSG_COOLDOWN                        = _UxGT("降溫");     //"Cooldown"
88
+  PROGMEM Language_Str MSG_LASER_MENU                      = _UxGT("激光控制");    //"Laser Control"
89
+  PROGMEM Language_Str MSG_LASER_OFF                       = _UxGT("激光 關");    //"Laser Off"
90
+  PROGMEM Language_Str MSG_LASER_ON                        = _UxGT("激光 開");   //"Laser On"
91
+  PROGMEM Language_Str MSG_LASER_POWER                     = _UxGT("激光電源");    //"Laser Power"
92
+  PROGMEM Language_Str MSG_SPINDLE_MENU                    = _UxGT("主軸控告制");    //"Spindle Control"
93
+  PROGMEM Language_Str MSG_SPINDLE_OFF                     = _UxGT("主軸 關");    //"Spindle Off"
94
+  PROGMEM Language_Str MSG_SPINDLE_ON                      = _UxGT("主軸 開");   //"Spindle On"
95
+  PROGMEM Language_Str MSG_SPINDLE_POWER                   = _UxGT("主軸電源");    //"Spindle Power"
96
+  PROGMEM Language_Str MSG_SPINDLE_REVERSE                 = _UxGT("主軸反轉");  //"Spindle Reverse"
74 97
   PROGMEM Language_Str MSG_SWITCH_PS_ON                    = _UxGT("電源打開");     //"Switch power on"
75 98
   PROGMEM Language_Str MSG_SWITCH_PS_OFF                   = _UxGT("電源關閉");     //"Switch power off"
76 99
   PROGMEM Language_Str MSG_EXTRUDE                         = _UxGT("擠出");     //"Extrude"
@@ -79,15 +102,31 @@ namespace Language_zh_TW {
79 102
   PROGMEM Language_Str MSG_BED_LEVELING                    = _UxGT("調平熱床");     //"Bed leveling"
80 103
   PROGMEM Language_Str MSG_LEVEL_BED                       = _UxGT("調平熱床");     //"Level bed"
81 104
   PROGMEM Language_Str MSG_LEVEL_CORNERS                   = _UxGT("調平邊角");     // "Level corners"
82
-
83 105
   PROGMEM Language_Str MSG_NEXT_CORNER                     = _UxGT("下個邊角");     // "Next corner"
106
+  PROGMEM Language_Str MSG_MESH_EDITOR                     = _UxGT("網格編輯器");    //"Mesh Editor"
84 107
   PROGMEM Language_Str MSG_EDIT_MESH                       = _UxGT("編輯網格");     // "Edit Mesh"
85 108
   PROGMEM Language_Str MSG_EDITING_STOPPED                 = _UxGT("網格編輯已停止");     // "Mesh Editing Stopped"
86
-  PROGMEM Language_Str MSG_USER_MENU                       = _UxGT("客制命令");     // "Custom Commands"
87
-
109
+  PROGMEM Language_Str MSG_PROBING_MESH                    = _UxGT("探測點");   //"Probing Point"
110
+  PROGMEM Language_Str MSG_MESH_X                          = _UxGT("索引 X");    //"Index X"
111
+  PROGMEM Language_Str MSG_MESH_Y                          = _UxGT("索引 Y");    //"Index Y"
112
+  PROGMEM Language_Str MSG_MESH_EDIT_Z                     = _UxGT("Z 值");    //"Z Value"
113
+  PROGMEM Language_Str MSG_USER_MENU                       = _UxGT("自定命令");     // "Custom Commands"
114
+  PROGMEM Language_Str MSG_M48_TEST                        = _UxGT("M48 探測測試");   //"M48 Probe Test"
115
+  PROGMEM Language_Str MSG_M48_POINT                       = _UxGT("M48 探測點");    //"M48 Point"
116
+  PROGMEM Language_Str MSG_M48_DEVIATION                   = _UxGT("偏差");    //"Deviation"
117
+  PROGMEM Language_Str MSG_IDEX_MENU                       = _UxGT("IDEX Mode");
118
+  PROGMEM Language_Str MSG_OFFSETS_MENU                    = _UxGT("Tool Offsets");
119
+  PROGMEM Language_Str MSG_IDEX_MODE_AUTOPARK              = _UxGT("Auto-Park");
120
+  PROGMEM Language_Str MSG_IDEX_MODE_DUPLICATE             = _UxGT("Duplication");
121
+  PROGMEM Language_Str MSG_IDEX_MODE_MIRRORED_COPY         = _UxGT("Mirrored Copy");
122
+  PROGMEM Language_Str MSG_IDEX_MODE_FULL_CTRL             = _UxGT("Full Control");
123
+  PROGMEM Language_Str MSG_HOTEND_OFFSET_X                 = _UxGT("2nd Nozzle X");
124
+  PROGMEM Language_Str MSG_HOTEND_OFFSET_Y                 = _UxGT("2nd Nozzle Y");
125
+  PROGMEM Language_Str MSG_HOTEND_OFFSET_Z                 = _UxGT("2nd Nozzle Z");
88 126
   PROGMEM Language_Str MSG_UBL_DOING_G29                   = _UxGT("執行G29");     // "Doing G29"
89 127
   PROGMEM Language_Str MSG_UBL_TOOLS                       = _UxGT("UBL工具");     // "UBL Tools"
90 128
   PROGMEM Language_Str MSG_UBL_LEVEL_BED                   = _UxGT("統一熱床調平(UBL)");     // "Unified Bed Leveling"
129
+  PROGMEM Language_Str MSG_LCD_TILTING_MESH                = _UxGT("傾斜點");  //"Tilting Point"
91 130
   PROGMEM Language_Str MSG_UBL_MANUAL_MESH                 = _UxGT("手工建網");     // "Manually Build Mesh"
92 131
   PROGMEM Language_Str MSG_UBL_BC_INSERT                   = _UxGT("放置墊片並測量");     // "Place shim & measure"
93 132
   PROGMEM Language_Str MSG_UBL_BC_INSERT2                  = _UxGT("測量");     // "Measure"
@@ -95,8 +134,10 @@ namespace Language_zh_TW {
95 134
   PROGMEM Language_Str MSG_UBL_MOVING_TO_NEXT              = _UxGT("移動到下一個");     // "Moving to next"
96 135
   PROGMEM Language_Str MSG_UBL_ACTIVATE_MESH               = _UxGT("啟動UBL");     // "Activate UBL"
97 136
   PROGMEM Language_Str MSG_UBL_DEACTIVATE_MESH             = _UxGT("關閉UBL");     // "Deactivate UBL"
98
-  PROGMEM Language_Str MSG_UBL_SET_TEMP_BED                = _UxGT("設置熱床溫度");     // "Bed Temp"
99
-  PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND             = _UxGT("熱端溫度");     // "Hotend Temp"
137
+  PROGMEM Language_Str MSG_UBL_SET_TEMP_BED                = _UxGT("置設熱床溫度");     // "Bed Temp"
138
+  PROGMEM Language_Str MSG_UBL_BED_TEMP_CUSTOM             = _UxGT("置設熱床溫度");    //"Bed Temp")
139
+  PROGMEM Language_Str MSG_UBL_SET_TEMP_HOTEND             = _UxGT("置設噴嘴溫度");     // "Hotend Temp"
140
+  PROGMEM Language_Str MSG_UBL_HOTEND_TEMP_CUSTOM          = _UxGT("熱端溫度");    //"Hotend Temp"
100 141
   PROGMEM Language_Str MSG_UBL_MESH_EDIT                   = _UxGT("網格編輯");     // "Mesh Edit"
101 142
   PROGMEM Language_Str MSG_UBL_EDIT_CUSTOM_MESH            = _UxGT("編輯客戶網格");     // "Edit Custom Mesh"
102 143
   PROGMEM Language_Str MSG_UBL_FINE_TUNE_MESH              = _UxGT("細調網格");     // "Fine Tuning Mesh"
@@ -112,6 +153,13 @@ namespace Language_zh_TW {
112 153
   PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M1            = _UxGT("批准 ") PREHEAT_1_LABEL _UxGT(" 網格");     // "Validate PREHEAT_1_LABEL Mesh"
113 154
   PROGMEM Language_Str MSG_UBL_VALIDATE_MESH_M2            = _UxGT("批准 ") PREHEAT_2_LABEL _UxGT(" 網格");     // "Validate PREHEAT_2_LABEL Mesh"
114 155
   PROGMEM Language_Str MSG_UBL_VALIDATE_CUSTOM_MESH        = _UxGT("批准客戶網格");     // "Validate Custom Mesh"
156
+  PROGMEM Language_Str MSG_G26_HEATING_BED                 = _UxGT("G26 加熱熱床");    //"G26 Heating Bed"
157
+  PROGMEM Language_Str MSG_G26_HEATING_NOZZLE              = _UxGT("G26 加熱噴嘴"); //"G26 Heating Nozzle"
158
+  PROGMEM Language_Str MSG_G26_MANUAL_PRIME                = _UxGT("手動填裝");  //"Manual priming..."
159
+  PROGMEM Language_Str MSG_G26_FIXED_LENGTH                = _UxGT("固定距離填裝");   //"Fixed Length Prime"
160
+  PROGMEM Language_Str MSG_G26_PRIME_DONE                  = _UxGT("完成填裝");   //"Done Priming"
161
+  PROGMEM Language_Str MSG_G26_CANCELED                    = _UxGT("G26已取消");   //"G26 Canceled"
162
+  PROGMEM Language_Str MSG_G26_LEAVING                     = _UxGT("離開 G26");  //"Leaving G26"
115 163
   PROGMEM Language_Str MSG_UBL_CONTINUE_MESH               = _UxGT("繼續熱床網格");     // "Continue Bed Mesh"
116 164
   PROGMEM Language_Str MSG_UBL_MESH_LEVELING               = _UxGT("網格調平");     // "Mesh Leveling"
117 165
   PROGMEM Language_Str MSG_UBL_3POINT_MESH_LEVELING        = _UxGT("三點調平");     // "3-Point Leveling"
@@ -141,6 +189,7 @@ namespace Language_zh_TW {
141 189
   PROGMEM Language_Str MSG_UBL_NO_STORAGE                  = _UxGT("沒有存儲");     // "No storage"
142 190
   PROGMEM Language_Str MSG_UBL_SAVE_ERROR                  = _UxGT("錯誤: UBL保存");     // "Err: UBL Save"
143 191
   PROGMEM Language_Str MSG_UBL_RESTORE_ERROR               = _UxGT("錯誤: UBL還原");     // "Err: UBL Restore"
192
+  PROGMEM Language_Str MSG_UBL_Z_OFFSET                    = _UxGT("Z-偏移:");   //"Z-Offset: "
144 193
   PROGMEM Language_Str MSG_UBL_Z_OFFSET_STOPPED            = _UxGT("Z偏移已停止");     // "Z-Offset Stopped"
145 194
   PROGMEM Language_Str MSG_UBL_STEP_BY_STEP_MENU           = _UxGT("一步步UBL");     // "Step-By-Step UBL"
146 195
   PROGMEM Language_Str MSG_UBL_1_BUILD_COLD_MESH           = _UxGT("1. 創設冷網格");
@@ -162,7 +211,7 @@ namespace Language_zh_TW {
162 211
   PROGMEM Language_Str MSG_SET_LEDS_INDIGO                 = _UxGT("青");     // "Indigo")
163 212
   PROGMEM Language_Str MSG_SET_LEDS_VIOLET                 = _UxGT("紫");     // "Violet")
164 213
   PROGMEM Language_Str MSG_SET_LEDS_WHITE                  = _UxGT("白");     // "White")
165
-  PROGMEM Language_Str MSG_SET_LEDS_DEFAULT                = _UxGT("缺省");     // "Default")
214
+  PROGMEM Language_Str MSG_SET_LEDS_DEFAULT                = _UxGT("復歸");     // "Default")
166 215
   PROGMEM Language_Str MSG_CUSTOM_LEDS                     = _UxGT("定制燈");     // "Custom Lights")
167 216
   PROGMEM Language_Str MSG_INTENSITY_R                     = _UxGT("紅飽和度");     // "Red Intensity")
168 217
   PROGMEM Language_Str MSG_INTENSITY_G                     = _UxGT("綠飽和度");     // "Green Intensity")
@@ -176,7 +225,8 @@ namespace Language_zh_TW {
176 225
   PROGMEM Language_Str MSG_MOVE_Y                          = _UxGT("移動Y");     //"Move Y"
177 226
   PROGMEM Language_Str MSG_MOVE_Z                          = _UxGT("移動Z");     //"Move Z"
178 227
   PROGMEM Language_Str MSG_MOVE_E                          = _UxGT("擠出機");     //"Extruder"
179
-  PROGMEM Language_Str MSG_MOVE_EN                         = _UxGT("擠出機 *");
228
+  PROGMEM Language_Str MSG_MOVE_EN                         = _UxGT("擠出機 *");       //"Extruder *"
229
+  PROGMEM Language_Str MSG_HOTEND_TOO_COLD                 = _UxGT("噴嘴溫度不夠");  //"Hotend too cold"
180 230
   PROGMEM Language_Str MSG_MOVE_Z_DIST                     = _UxGT("移動 %s mm");     //"Move 0.025mm"
181 231
   PROGMEM Language_Str MSG_MOVE_01MM                       = _UxGT("移動 0.1 mm");     //"Move 0.1mm"
182 232
   PROGMEM Language_Str MSG_MOVE_1MM                        = _UxGT("移動 1 mm");     //"Move 1mm"
@@ -186,10 +236,12 @@ namespace Language_zh_TW {
186 236
   PROGMEM Language_Str MSG_NOZZLE                          = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴");     //"Nozzle" 噴嘴
187 237
   PROGMEM Language_Str MSG_NOZZLE_N                        = " " LCD_STR_THERMOMETER _UxGT(" 噴嘴 ~");
188 238
   PROGMEM Language_Str MSG_BED                             = " " LCD_STR_THERMOMETER _UxGT(" 熱床");     //"Bed"
239
+  PROGMEM Language_Str MSG_CHAMBER                         = _UxGT("Enclosure");
189 240
   PROGMEM Language_Str MSG_FAN_SPEED                       = _UxGT("風扇速率");     //"Fan speed"
190
-  PROGMEM Language_Str MSG_FAN_SPEED_N                     = _UxGT("風扇速率 ~");
241
+  PROGMEM Language_Str MSG_FAN_SPEED_N                     = _UxGT("風扇速率 =");
242
+  PROGMEM Language_Str MSG_STORED_FAN_N                    = _UxGT("Stored Fan =");
191 243
   PROGMEM Language_Str MSG_EXTRA_FAN_SPEED                 = _UxGT("額外風扇速率");     // "Extra fan speed"
192
-  PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N               = _UxGT("額外風扇速率 ~");
244
+  PROGMEM Language_Str MSG_EXTRA_FAN_SPEED_N               = _UxGT("額外風扇速率 =");
193 245
   PROGMEM Language_Str MSG_FLOW                            = _UxGT("擠出速率");
194 246
   PROGMEM Language_Str MSG_FLOW_N                          = _UxGT("擠出速率 ~");     //"Flow"
195 247
   PROGMEM Language_Str MSG_CONTROL                         = _UxGT("控制");     //"Control"
@@ -197,8 +249,20 @@ namespace Language_zh_TW {
197 249
   PROGMEM Language_Str MSG_MAX                             = " " LCD_STR_THERMOMETER _UxGT(" 最大");     //" " LCD_STR_THERMOMETER " Max"
198 250
   PROGMEM Language_Str MSG_FACTOR                          = " " LCD_STR_THERMOMETER _UxGT(" 系數");     //" " LCD_STR_THERMOMETER " Fact"
199 251
   PROGMEM Language_Str MSG_AUTOTEMP                        = _UxGT("自動控溫");     //"Autotemp"
200
-  PROGMEM Language_Str MSG_LCD_ON                          = _UxGT("開");     //"On"
201
-  PROGMEM Language_Str MSG_LCD_OFF                         = _UxGT("關");     //"Off"
252
+  PROGMEM Language_Str MSG_LCD_ON                          = _UxGT("開 ");     //"On"
253
+  PROGMEM Language_Str MSG_LCD_OFF                         = _UxGT("關 ");     //"Off"
254
+  PROGMEM Language_Str MSG_PID_AUTOTUNE                    = _UxGT("PID Autotune");
255
+  PROGMEM Language_Str MSG_PID_AUTOTUNE_E                  = _UxGT("PID Autotune *");
256
+  PROGMEM Language_Str MSG_PID_P                           = _UxGT("PID-P");     //"PID-P"
257
+  PROGMEM Language_Str MSG_PID_P_E                         = _UxGT("PID-P *");
258
+  PROGMEM Language_Str MSG_PID_I                           = _UxGT("PID-I");     //"PID-I"
259
+  PROGMEM Language_Str MSG_PID_I_E                         = _UxGT("PID-I *");
260
+  PROGMEM Language_Str MSG_PID_D                           = _UxGT("PID-D");     //"PID-D"
261
+  PROGMEM Language_Str MSG_PID_D_E                         = _UxGT("PID-D *");
262
+  PROGMEM Language_Str MSG_PID_C                           = _UxGT("PID-C");     //"PID-C"
263
+  PROGMEM Language_Str MSG_PID_C_E                         = _UxGT("PID-C *");
264
+  PROGMEM Language_Str MSG_PID_F                           = _UxGT("PID-F");    //"PID-F"
265
+  PROGMEM Language_Str MSG_PID_F_E                         = _UxGT("PID-F *");
202 266
   PROGMEM Language_Str MSG_SELECT                          = _UxGT("選擇");     //"Select"
203 267
   PROGMEM Language_Str MSG_SELECT_E                        = _UxGT("選擇 *");
204 268
   PROGMEM Language_Str MSG_ACC                             = _UxGT("加速度");     //"Accel" acceleration
@@ -207,6 +271,7 @@ namespace Language_zh_TW {
207 271
   PROGMEM Language_Str MSG_VB_JERK                         = _UxGT("軸抖動速率") LCD_STR_B;     //"Vb-jerk"
208 272
   PROGMEM Language_Str MSG_VC_JERK                         = _UxGT("軸抖動速率") LCD_STR_C;     //"Vc-jerk"
209 273
   PROGMEM Language_Str MSG_VE_JERK                         = _UxGT("擠出機抖動速率");     //"Ve-jerk"
274
+  PROGMEM Language_Str MSG_JUNCTION_DEVIATION              = _UxGT("Junction Dev");
210 275
   PROGMEM Language_Str MSG_VELOCITY                        = _UxGT("速度");     // "Velocity"
211 276
   PROGMEM Language_Str MSG_VMAX_A                          = _UxGT("最大進料速率") LCD_STR_A;     //"Vmax " max_feedrate_mm_s
212 277
   PROGMEM Language_Str MSG_VMAX_B                          = _UxGT("最大進料速率") LCD_STR_B;
@@ -237,23 +302,45 @@ namespace Language_zh_TW {
237 302
   PROGMEM Language_Str MSG_FILAMENT_DIAM_E                 = _UxGT("絲料直徑 *");
238 303
   PROGMEM Language_Str MSG_FILAMENT_UNLOAD                 = _UxGT("卸載 mm");     // "Unload mm"
239 304
   PROGMEM Language_Str MSG_FILAMENT_LOAD                   = _UxGT("装載 mm");     // "Load mm"
305
+  PROGMEM Language_Str MSG_ADVANCE_K                       = _UxGT("Advance K");
306
+  PROGMEM Language_Str MSG_ADVANCE_K_E                     = _UxGT("Advance K *");
240 307
   PROGMEM Language_Str MSG_CONTRAST                        = _UxGT("LCD對比度");     //"LCD contrast"
241 308
   PROGMEM Language_Str MSG_STORE_EEPROM                    = _UxGT("保存設置");     //"Store memory"
242 309
   PROGMEM Language_Str MSG_LOAD_EEPROM                     = _UxGT("載入設置");     //"Load memory"
243
-  PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = _UxGT("恢復安全值");     //"Restore Defaults"
310
+  PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = _UxGT("恢復安全值");     //"Restore failsafe"
244 311
   PROGMEM Language_Str MSG_INIT_EEPROM                     = _UxGT("初始化設置");     // "Initialize EEPROM"
245
-  PROGMEM Language_Str MSG_REFRESH                         = LCD_STR_REFRESH  _UxGT("刷新");     //"Refresh"
312
+  PROGMEM Language_Str MSG_ERR_EEPROM_CRC                  = _UxGT("錯誤: EEPROM CRC");    //"Err: EEPROM CRC"
313
+  PROGMEM Language_Str MSG_ERR_EEPROM_INDEX                = _UxGT("錯誤: EEPROM Index");    //"Err: EEPROM Index"
314
+  PROGMEM Language_Str MSG_ERR_EEPROM_VERSION              = _UxGT("錯誤: EEPROM Version");    //"EEPROM Version"
315
+  PROGMEM Language_Str MSG_MEDIA_UPDATE                    = _UxGT("媒體更新");    //"Media Update"
316
+  PROGMEM Language_Str MSG_RESET_PRINTER                   = _UxGT("重置打印機");    //"Reset Printer
317
+  PROGMEM Language_Str MSG_REFRESH                         = _UxGT("刷新");     //"Refresh"
246 318
   PROGMEM Language_Str MSG_INFO_SCREEN                     = _UxGT("資訊界面");     //"Info screen"
247 319
   PROGMEM Language_Str MSG_PREPARE                         = _UxGT("準備");     //"Prepare"
248 320
   PROGMEM Language_Str MSG_TUNE                            = _UxGT("調整");     //"Tune"
321
+  PROGMEM Language_Str MSG_START_PRINT                     = _UxGT("開始列印");   //"Start Print"
322
+  PROGMEM Language_Str MSG_BUTTON_NEXT                     = _UxGT("下一個");   //"Next"
323
+  PROGMEM Language_Str MSG_BUTTON_INIT                     = _UxGT("初始  ");   //"Init"
324
+  PROGMEM Language_Str MSG_BUTTON_STOP                     = _UxGT("停止  ");   //"Stop"
325
+  PROGMEM Language_Str MSG_BUTTON_PRINT                    = _UxGT("列印  ");   //"Print"
326
+  PROGMEM Language_Str MSG_BUTTON_RESET                    = _UxGT("復歸  ");   //"Reset"
327
+  PROGMEM Language_Str MSG_BUTTON_CANCEL                   = _UxGT("放棄  ");   //"Cancel"
328
+  PROGMEM Language_Str MSG_BUTTON_DONE                     = _UxGT("確認  ");   //"Done"
329
+  PROGMEM Language_Str MSG_BUTTON_BACK                     = _UxGT("返回  ");   //"Back"
330
+  PROGMEM Language_Str MSG_BUTTON_PROCEED                  = _UxGT("繼續  ");   //"Proceed"
249 331
   PROGMEM Language_Str MSG_PAUSE_PRINT                     = _UxGT("暫停列印");     //"Pause print"
250 332
   PROGMEM Language_Str MSG_RESUME_PRINT                    = _UxGT("恢復列印");     //"Resume print"
251 333
   PROGMEM Language_Str MSG_STOP_PRINT                      = _UxGT("停止列印");     //"Stop print"
334
+  PROGMEM Language_Str MSG_PRINTING_OBJECT                 = _UxGT("列印物件");   //"Printing Object"
335
+  PROGMEM Language_Str MSG_CANCEL_OBJECT                   = _UxGT("中止物件");   //"Cancel Object"
336
+  PROGMEM Language_Str MSG_CANCEL_OBJECT_N                 = _UxGT("中止物件 =");   //"Cancel Object ="
337
+  PROGMEM Language_Str MSG_OUTAGE_RECOVERY                 = _UxGT("中斷恢復");   //"Outage Recovery"
252 338
   PROGMEM Language_Str MSG_MEDIA_MENU                      = _UxGT("從記憶卡上列印");     //"Print from SD"
253 339
   PROGMEM Language_Str MSG_NO_MEDIA                        = _UxGT("無記憶卡");     //"No SD card"
254 340
   PROGMEM Language_Str MSG_DWELL                           = _UxGT("休眠 ...");     //"Sleep..."
255 341
   PROGMEM Language_Str MSG_USERWAIT                        = _UxGT("點擊繼續 ...");     //"Click to resume..."
256 342
   PROGMEM Language_Str MSG_PRINT_PAUSED                    = _UxGT("列印已暫停");     // "Print paused"
343
+  PROGMEM Language_Str MSG_PRINTING                        = _UxGT("列印中 ...");   //"Printing..."
257 344
   PROGMEM Language_Str MSG_PRINT_ABORTED                   = _UxGT("已取消列印");     //"Print aborted"
258 345
   PROGMEM Language_Str MSG_NO_MOVE                         = _UxGT("無移動");     //"No move."
259 346
   PROGMEM Language_Str MSG_KILLED                          = _UxGT("已砍掉");     //"KILLED. "
@@ -267,6 +354,13 @@ namespace Language_zh_TW {
267 354
   PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVERF        = _UxGT("回縮恢復後進料速率mm/s");     //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s)
268 355
   PROGMEM Language_Str MSG_CONTROL_RETRACT_RECOVER_SWAPF   = _UxGT("S UnRet V");     // "S UnRet V"
269 356
   PROGMEM Language_Str MSG_AUTORETRACT                     = _UxGT("自動回縮");     //"AutoRetr." autoretract_enabled,
357
+  PROGMEM Language_Str MSG_FILAMENT_SWAP_LENGTH            = _UxGT("交換長度");    //"Swap Length"
358
+  PROGMEM Language_Str MSG_FILAMENT_PURGE_LENGTH           = _UxGT("清除長度");   //"Purge Length"
359
+  PROGMEM Language_Str MSG_TOOL_CHANGE                     = _UxGT("交換工具"); //"Tool Change"
360
+  PROGMEM Language_Str MSG_TOOL_CHANGE_ZLIFT               = _UxGT("Z軸提昇");    //"Z Raise"
361
+  PROGMEM Language_Str MSG_SINGLENOZZLE_PRIME_SPD          = _UxGT("最高速度");    //"Prime Speed"
362
+  PROGMEM Language_Str MSG_SINGLENOZZLE_RETRACT_SPD        = _UxGT("收回速度");  //"Retract Speed"
363
+  PROGMEM Language_Str MSG_NOZZLE_STANDBY                  = _UxGT("噴嘴待機"); //"Nozzle Standby"
270 364
   PROGMEM Language_Str MSG_FILAMENTCHANGE                  = _UxGT("更換絲料");     //"Change filament"
271 365
   PROGMEM Language_Str MSG_FILAMENTCHANGE_E                = _UxGT("更換絲料 *");
272 366
   PROGMEM Language_Str MSG_FILAMENTLOAD                    = _UxGT("裝載絲料");     // "Load filament"
@@ -274,28 +368,55 @@ namespace Language_zh_TW {
274 368
   PROGMEM Language_Str MSG_FILAMENTUNLOAD                  = _UxGT("卸載絲料");     // "Unload filament"
275 369
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_E                = _UxGT("卸載絲料 *");     // "Unload filament"
276 370
   PROGMEM Language_Str MSG_FILAMENTUNLOAD_ALL              = _UxGT("卸載全部");     // "Unload All"
277
-  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("初始化記憶卡");     //"Init. SD card"
371
+  PROGMEM Language_Str MSG_INIT_MEDIA                      = _UxGT("初始化記憶卡");     //"Init. SD card"
372
+  PROGMEM Language_Str MSG_ATTACH_MEDIA                    = _UxGT("連接記憶卡");     //"Attach Media
278 373
   PROGMEM Language_Str MSG_CHANGE_MEDIA                    = _UxGT("更換記憶卡");     //"Change SD card"
374
+  PROGMEM Language_Str MSG_RELEASE_MEDIA                   = _UxGT("釋放媒體");   //"Release Media"
279 375
   PROGMEM Language_Str MSG_ZPROBE_OUT                      = _UxGT("Z探針在熱床之外");     //"Z probe out. bed" Z probe is not within the physical limits
280 376
   PROGMEM Language_Str MSG_SKEW_FACTOR                     = _UxGT("偏斜因數");     // "Skew Factor"
281 377
   PROGMEM Language_Str MSG_BLTOUCH                         = _UxGT("BLTouch");     // "BLTouch"
282 378
   PROGMEM Language_Str MSG_BLTOUCH_SELFTEST                = _UxGT("BLTouch 自檢");     // "BLTouch Self-Test"
283 379
   PROGMEM Language_Str MSG_BLTOUCH_RESET                   = _UxGT("重置BLTouch");     // "Reset BLTouch"
284
-  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("部署BLTouch");     // "Deploy BLTouch"
285 380
   PROGMEM Language_Str MSG_BLTOUCH_STOW                    = _UxGT("裝載BLTouch");     // "Stow BLTouch"
381
+  PROGMEM Language_Str MSG_BLTOUCH_DEPLOY                  = _UxGT("部署BLTouch");     // "Deploy BLTouch"
382
+  PROGMEM Language_Str MSG_BLTOUCH_SW_MODE                 = _UxGT("Cmd: SW-Mode");
383
+  PROGMEM Language_Str MSG_BLTOUCH_5V_MODE                 = _UxGT("Cmd: 5V-Mode");
384
+  PROGMEM Language_Str MSG_BLTOUCH_OD_MODE                 = _UxGT("Cmd: OD-Mode");
385
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE              = _UxGT("Cmd: Mode-Store");
386
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_5V           = _UxGT("Set BLTouch to 5V");
387
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_STORE_OD           = _UxGT("Set BLTouch to OD");
388
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_ECHO               = _UxGT("Report Drain");
389
+  PROGMEM Language_Str MSG_BLTOUCH_MODE_CHANGE             = _UxGT("DANGER: Bad settings can cause damage! Proceed anyway?");
390
+  PROGMEM Language_Str MSG_TOUCHMI_PROBE                   = _UxGT("TouchMI");
391
+  PROGMEM Language_Str MSG_TOUCHMI_INIT                    = _UxGT("Init TouchMI");
392
+  PROGMEM Language_Str MSG_TOUCHMI_ZTEST                   = _UxGT("Z Offset Test");
393
+  PROGMEM Language_Str MSG_TOUCHMI_SAVE                    = _UxGT("Save");
394
+  PROGMEM Language_Str MSG_MANUAL_DEPLOY_TOUCHMI           = _UxGT("Deploy TouchMI");
395
+  PROGMEM Language_Str MSG_MANUAL_DEPLOY                   = _UxGT("Deploy Z-Probe");
396
+  PROGMEM Language_Str MSG_MANUAL_STOW                     = _UxGT("Stow Z-Probe");
286 397
   PROGMEM Language_Str MSG_HOME_FIRST                      = _UxGT("歸位 %s%s%s 先");     //"Home ... first"
287
-  PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("Z偏移");     //"Z Offset"
398
+  PROGMEM Language_Str MSG_ZPROBE_OFFSETS                  = _UxGT("探針偏移");   //Probe Offsets
399
+  PROGMEM Language_Str MSG_ZPROBE_XOFFSET                  = _UxGT("探針X偏移量");   //Probe X Offset
400
+  PROGMEM Language_Str MSG_ZPROBE_YOFFSET                  = _UxGT("探針Y偏移量");   //Probe Y Offset
401
+  PROGMEM Language_Str MSG_ZPROBE_ZOFFSET                  = _UxGT("探針Z偏移量");   //Probe Z Offset
288 402
   PROGMEM Language_Str MSG_BABYSTEP_X                      = _UxGT("微量調整X軸");     //"Babystep X" lcd_babystep_x, Babystepping enables the user to control the axis in tiny amounts
289 403
   PROGMEM Language_Str MSG_BABYSTEP_Y                      = _UxGT("微量調整Y軸");     //"Babystep Y"
290 404
   PROGMEM Language_Str MSG_BABYSTEP_Z                      = _UxGT("微量調整Z軸");     //"Babystep Z"
405
+  PROGMEM Language_Str MSG_BABYSTEP_TOTAL                  = _UxGT("總計");    //"Total"
291 406
   PROGMEM Language_Str MSG_ENDSTOP_ABORT                   = _UxGT("擋塊終止");     //"Endstop abort"
292 407
   PROGMEM Language_Str MSG_HEATING_FAILED_LCD              = _UxGT("加熱失敗");     //"Heating failed"
293
-  PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("錯誤:REDUNDANT TEMP");     //"Err: REDUNDANT TEMP"
294
-  PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("溫控失控");     //"THERMAL RUNAWAY"
408
+  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_BED          = _UxGT("熱床加熱失敗");   //"Bed Heating Failed"
409
+  PROGMEM Language_Str MSG_HEATING_FAILED_LCD_CHAMBER      = _UxGT("機箱加熱失敗");   //"Chamber Heating Fail"
410
+  PROGMEM Language_Str MSG_ERR_REDUNDANT_TEMP              = _UxGT("錯誤:冗餘溫度");     //"Err: REDUNDANT TEMP"
411
+  PROGMEM Language_Str MSG_THERMAL_RUNAWAY                 = _UxGT("溫度失控");    //"THERMAL RUNAWAY"
412
+  PROGMEM Language_Str MSG_THERMAL_RUNAWAY_BED             = _UxGT("熱床溫度失控");    //"BED THERMAL RUNAWAY"
413
+  PROGMEM Language_Str MSG_THERMAL_RUNAWAY_CHAMBER         = _UxGT("機箱溫度失控");   //"CHAMBER T. RUNAWAY"
295 414
   PROGMEM Language_Str MSG_ERR_MAXTEMP                     = _UxGT("錯誤:最高溫度");     //"Err: MAXTEMP"
296 415
   PROGMEM Language_Str MSG_ERR_MINTEMP                     = _UxGT("錯誤:最低溫度");     //"Err: MINTEMP"
297 416
   PROGMEM Language_Str MSG_ERR_MAXTEMP_BED                 = _UxGT("錯誤:最高熱床溫度");     //"Err: MAXTEMP BED"
298 417
   PROGMEM Language_Str MSG_ERR_MINTEMP_BED                 = _UxGT("錯誤:最低熱床溫度");     //"Err: MINTEMP BED"
418
+  PROGMEM Language_Str MSG_ERR_MAXTEMP_CHAMBER             = _UxGT("錯誤:最高機箱溫度");   //"Err: MAXTEMP CHAMBER"
419
+  PROGMEM Language_Str MSG_ERR_MINTEMP_CHAMBER             = _UxGT("錯誤:最低機箱溫度");   //"Err: MINTEMP CHAMBER"
299 420
   PROGMEM Language_Str MSG_ERR_Z_HOMING                    = _UxGT("歸位 XY 先");     //"Home XY First"
300 421
   PROGMEM Language_Str MSG_HALTED                          = _UxGT("印表機停機");     //"PRINTER HALTED"
301 422
   PROGMEM Language_Str MSG_PLEASE_RESET                    = _UxGT("請重置");     //"Please reset"
@@ -303,7 +424,11 @@ namespace Language_zh_TW {
303 424
   PROGMEM Language_Str MSG_SHORT_HOUR                      = _UxGT("時");     //"h" // One character only
304 425
   PROGMEM Language_Str MSG_SHORT_MINUTE                    = _UxGT("分");     //"m" // One character only
305 426
   PROGMEM Language_Str MSG_HEATING                         = _UxGT("加熱中 ...");     //"Heating..."
427
+  PROGMEM Language_Str MSG_COOLING                         = _UxGT("冷卻中 ...");   //"Cooling..."
306 428
   PROGMEM Language_Str MSG_BED_HEATING                     = _UxGT("加熱熱床中 ...");     //"Bed Heating..."
429
+  PROGMEM Language_Str MSG_BED_COOLING                     = _UxGT("熱床冷卻中 ...");   //"Bed Cooling..."
430
+  PROGMEM Language_Str MSG_CHAMBER_HEATING                 = _UxGT("機箱加熱中 ..");   //"Chamber Heating..."
431
+  PROGMEM Language_Str MSG_CHAMBER_COOLING                 = _UxGT("機箱冷卻中 ...");   //Chamber Cooling...
307 432
   PROGMEM Language_Str MSG_DELTA_CALIBRATE                 = _UxGT("⊿校準");     //"Delta Calibration"
308 433
   PROGMEM Language_Str MSG_DELTA_CALIBRATE_X               = _UxGT("⊿校準X");     //"Calibrate X"
309 434
   PROGMEM Language_Str MSG_DELTA_CALIBRATE_Y               = _UxGT("⊿校準Y");     //"Calibrate Y"
@@ -312,6 +437,7 @@ namespace Language_zh_TW {
312 437
   PROGMEM Language_Str MSG_DELTA_SETTINGS                  = _UxGT("⊿設置");     // "Delta Settings"
313 438
   PROGMEM Language_Str MSG_DELTA_AUTO_CALIBRATE            = _UxGT("⊿自動校準");     // "Auto Calibration"
314 439
   PROGMEM Language_Str MSG_DELTA_HEIGHT_CALIBRATE          = _UxGT("設置⊿高度");     // "Set Delta Height"
440
+  PROGMEM Language_Str MSG_DELTA_Z_OFFSET_CALIBRATE        = _UxGT("Z偏移");
315 441
   PROGMEM Language_Str MSG_DELTA_DIAG_ROD                  = _UxGT("⊿斜柱");     // "Diag Rod"
316 442
   PROGMEM Language_Str MSG_DELTA_HEIGHT                    = _UxGT("⊿高度");     // "Height"
317 443
   PROGMEM Language_Str MSG_DELTA_RADIUS                    = _UxGT("⊿半徑");     // "Radius"
@@ -319,18 +445,20 @@ namespace Language_zh_TW {
319 445
   PROGMEM Language_Str MSG_INFO_PRINTER_MENU               = _UxGT("印表機訊息");     //"Printer Info"
320 446
   PROGMEM Language_Str MSG_3POINT_LEVELING                 = _UxGT("三點調平");     // "3-Point Leveling"
321 447
   PROGMEM Language_Str MSG_LINEAR_LEVELING                 = _UxGT("線性調平");     // "Linear Leveling"
322
-  PROGMEM Language_Str MSG_BILINEAR_LEVELING               = _UxGT("雙線性調平");     // "Bilinear Leveling"
448
+  PROGMEM Language_Str MSG_BILINEAR_LEVELING               = _UxGT("      雙線性調平");     // "Bilinear Leveling"
323 449
   PROGMEM Language_Str MSG_UBL_LEVELING                    = _UxGT("統一熱床調平(UBL)");     // "Unified Bed Leveling"
324 450
   PROGMEM Language_Str MSG_MESH_LEVELING                   = _UxGT("網格調平");     // "Mesh Leveling"
325 451
   PROGMEM Language_Str MSG_INFO_STATS_MENU                 = _UxGT("印表機統計");     //"Printer Stats"
326 452
   PROGMEM Language_Str MSG_INFO_BOARD_MENU                 = _UxGT("主板訊息");     //"Board Info"
327 453
   PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU            = _UxGT("溫度計");     //"Thermistors"
328
-  PROGMEM Language_Str MSG_INFO_EXTRUDERS                  = _UxGT("擠出機");     //"Extruders"
454
+  PROGMEM Language_Str MSG_INFO_EXTRUDERS                  = _UxGT("      擠出機");     //"Extruders"
329 455
   PROGMEM Language_Str MSG_INFO_BAUDRATE                   = _UxGT("傳輸率");     //"Baud"
330 456
   PROGMEM Language_Str MSG_INFO_PROTOCOL                   = _UxGT("協議");     //"Protocol"
457
+  PROGMEM Language_Str MSG_INFO_RUNAWAY_OFF                = _UxGT("監測溫度失控:關");   //"Runaway Watch: OFF"
458
+  PROGMEM Language_Str MSG_INFO_RUNAWAY_ON                 = _UxGT("監測溫度失控:開");    //"Runaway Watch: ON"
459
+
331 460
   PROGMEM Language_Str MSG_CASE_LIGHT                      = _UxGT("外殼燈");     // "Case light"
332 461
   PROGMEM Language_Str MSG_CASE_LIGHT_BRIGHTNESS           = _UxGT("燈亮度");     // "Light BRIGHTNESS"
333
-
334 462
   PROGMEM Language_Str MSG_EXPECTED_PRINTER                = _UxGT("打印機不正確");     // "The printer is incorrect"
335 463
 
336 464
   #if LCD_WIDTH >= 20
@@ -351,11 +479,14 @@ namespace Language_zh_TW {
351 479
   PROGMEM Language_Str MSG_INFO_MAX_TEMP                   = _UxGT("最高溫度");     //"Max Temp"
352 480
   PROGMEM Language_Str MSG_INFO_PSU                        = _UxGT("電源供應");     //"Power Supply"
353 481
   PROGMEM Language_Str MSG_DRIVE_STRENGTH                  = _UxGT("驅動力度");     // "Drive Strength"
354
-  PROGMEM Language_Str MSG_DAC_PERCENT_X                   = _UxGT("X 驅動 %");     // "X Driver %"
355
-  PROGMEM Language_Str MSG_DAC_PERCENT_Y                   = _UxGT("Y 驅動 %");     // "Y Driver %"
356
-  PROGMEM Language_Str MSG_DAC_PERCENT_Z                   = _UxGT("Z 驅動 %");     // "Z Driver %"
357
-  PROGMEM Language_Str MSG_DAC_PERCENT_E                   = _UxGT("E 驅動 %");     // "E Driver %"
482
+  PROGMEM Language_Str MSG_DAC_PERCENT                     = _UxGT("驅動 %");     // "Driver %"
483
+  PROGMEM Language_Str MSG_DAC_PERCENT_X                   = _UxGT("X 驅動 %");    //X Driver %
484
+  PROGMEM Language_Str MSG_DAC_PERCENT_Y                   = _UxGT("Y 驅動 %");    //Y Driver %
485
+  PROGMEM Language_Str MSG_DAC_PERCENT_Z                   = _UxGT("Z 驅動 %");    //Z Driver %
486
+  PROGMEM Language_Str MSG_DAC_PERCENT_E                   = _UxGT("E 驅動 %");    //E Driver %
487
+  PROGMEM Language_Str MSG_ERROR_TMC                       = _UxGT("TMC連接錯誤");   //"TMC CONNECTION ERROR"
358 488
   PROGMEM Language_Str MSG_DAC_EEPROM_WRITE                = _UxGT("保存驅動設置");     // "DAC EEPROM Write"
489
+  PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER          = _UxGT("更換絲料");   //"FILAMENT CHANGE"
359 490
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_PAUSE    = _UxGT("列印已暫停");     // "PRINT PAUSED"
360 491
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_LOAD     = _UxGT("裝載絲料");     // "LOAD FILAMENT"
361 492
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEADER_UNLOAD   = _UxGT("卸載絲料");     // "UNLOAD FILAMENT"
@@ -363,26 +494,112 @@ namespace Language_zh_TW {
363 494
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_PURGE    = _UxGT("清除更多");     // "Purge more"
364 495
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_OPTION_RESUME   = _UxGT("恢復列印");     //"Resume print"
365 496
   PROGMEM Language_Str MSG_FILAMENT_CHANGE_NOZZLE          = _UxGT("  噴嘴: ");     // "  Nozzle: "
497
+  PROGMEM Language_Str MSG_RUNOUT_SENSOR                   = _UxGT("斷絲偵測");    //"Runout Sensor"
498
+  PROGMEM Language_Str MSG_RUNOUT_DISTANCE_MM              = _UxGT("絲距離mm");   //"Runout Dist mm"
366 499
   PROGMEM Language_Str MSG_LCD_HOMING_FAILED               = _UxGT("歸原位失敗");     // "Homing failed"
367 500
   PROGMEM Language_Str MSG_LCD_PROBING_FAILED              = _UxGT("探針探測失敗");     // "Probing failed"
368 501
   PROGMEM Language_Str MSG_M600_TOO_COLD                   = _UxGT("M600: 太冷");     // "M600: Too cold"
369 502
 
503
+  PROGMEM Language_Str MSG_MMU2_CHOOSE_FILAMENT_HEADER     = _UxGT("CHOOSE FILAMENT");
504
+  PROGMEM Language_Str MSG_MMU2_MENU                       = _UxGT("MMU");
505
+  PROGMEM Language_Str MSG_MMU2_WRONG_FIRMWARE             = _UxGT("Update MMU Firmware!");
506
+  PROGMEM Language_Str MSG_MMU2_NOT_RESPONDING             = _UxGT("MMU Needs Attention.");
507
+  PROGMEM Language_Str MSG_MMU2_RESUME                     = _UxGT("Resume Print");
508
+  PROGMEM Language_Str MSG_MMU2_RESUMING                   = _UxGT("Resuming...");
509
+  PROGMEM Language_Str MSG_MMU2_LOAD_FILAMENT              = _UxGT("Load Filament");
510
+  PROGMEM Language_Str MSG_MMU2_LOAD_ALL                   = _UxGT("Load All");
511
+  PROGMEM Language_Str MSG_MMU2_LOAD_TO_NOZZLE             = _UxGT("Load to Nozzle");
512
+  PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT             = _UxGT("Eject Filament");
513
+  PROGMEM Language_Str MSG_MMU2_EJECT_FILAMENT_N           = _UxGT("Eject Filament ~");
514
+  PROGMEM Language_Str MSG_MMU2_UNLOAD_FILAMENT            = _UxGT("Unload Filament");
515
+  PROGMEM Language_Str MSG_MMU2_LOADING_FILAMENT           = _UxGT("Loading Fil. %i...");
516
+  PROGMEM Language_Str MSG_MMU2_EJECTING_FILAMENT          = _UxGT("Ejecting Fil. ...");
517
+  PROGMEM Language_Str MSG_MMU2_UNLOADING_FILAMENT         = _UxGT("Unloading Fil....");
518
+  PROGMEM Language_Str MSG_MMU2_ALL                        = _UxGT("All");
519
+  PROGMEM Language_Str MSG_MMU2_FILAMENT_N                 = _UxGT("Filament ~");
520
+  PROGMEM Language_Str MSG_MMU2_RESET                      = _UxGT("Reset MMU");
521
+  PROGMEM Language_Str MSG_MMU2_RESETTING                  = _UxGT("Resetting MMU...");
522
+  PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER              = _UxGT("Remove, click");
523
+
524
+  PROGMEM Language_Str MSG_MIX                             = _UxGT("Mix");
525
+  PROGMEM Language_Str MSG_MIX_COMPONENT_N                 = _UxGT("Component =");
526
+  PROGMEM Language_Str MSG_MIXER                           = _UxGT("Mixer");
527
+  PROGMEM Language_Str MSG_GRADIENT                        = _UxGT("Gradient");
528
+  PROGMEM Language_Str MSG_FULL_GRADIENT                   = _UxGT("Full Gradient");
529
+  PROGMEM Language_Str MSG_TOGGLE_MIX                      = _UxGT("Toggle Mix");
530
+  PROGMEM Language_Str MSG_CYCLE_MIX                       = _UxGT("Cycle Mix");
531
+  PROGMEM Language_Str MSG_GRADIENT_MIX                    = _UxGT("Gradient Mix");
532
+  PROGMEM Language_Str MSG_REVERSE_GRADIENT                = _UxGT("Reverse Gradient");
533
+  PROGMEM Language_Str MSG_ACTIVE_VTOOL                    = _UxGT("Active V-tool");
534
+  PROGMEM Language_Str MSG_START_VTOOL                     = _UxGT("Start V-tool");
535
+  PROGMEM Language_Str MSG_END_VTOOL                       = _UxGT("  End V-tool");
536
+  PROGMEM Language_Str MSG_GRADIENT_ALIAS                  = _UxGT("Alias V-tool");
537
+  PROGMEM Language_Str MSG_RESET_VTOOLS                    = _UxGT("Reset V-tools");
538
+  PROGMEM Language_Str MSG_COMMIT_VTOOL                    = _UxGT("Commit V-tool Mix");
539
+  PROGMEM Language_Str MSG_VTOOLS_RESET                    = _UxGT("V-tools Were Reset");
540
+  PROGMEM Language_Str MSG_START_Z                         = _UxGT("Start Z:");
541
+  PROGMEM Language_Str MSG_END_Z                           = _UxGT("  End Z:");
542
+
543
+  PROGMEM Language_Str MSG_GAMES                           = _UxGT("Games");
544
+  PROGMEM Language_Str MSG_BRICKOUT                        = _UxGT("Brickout");
545
+  PROGMEM Language_Str MSG_INVADERS                        = _UxGT("Invaders");
546
+  PROGMEM Language_Str MSG_SNAKE                           = _UxGT("Sn4k3");
547
+  PROGMEM Language_Str MSG_MAZE                            = _UxGT("Maze");
548
+
549
+  #define MSG_1_LINE(A)     A "\0"   "\0"
550
+  #define MSG_2_LINE(A,B)   A "\0" B "\0"
551
+  #define MSG_3_LINE(A,B,C) A "\0" B "\0" C
552
+
553
+  //
554
+  // Filament Change screens show up to 3 lines on a 4-line display
555
+  //                        ...or up to 2 lines on a 3-line display
556
+  //
370 557
   #if LCD_HEIGHT >= 4
558
+    PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING        = _UxGT(MSG_2_LINE("按下按鈕", "恢復列印")); //"Press Button to resume print"
559
+    PROGMEM Language_Str MSG_PAUSE_PRINT_INIT              = _UxGT(MSG_1_LINE("停車中 ..."));   //"Parking..."
371 560
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT          = _UxGT(MSG_3_LINE("等待開始", "絲料", "變更"));     //"Wait for start of the filament change"
372 561
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD        = _UxGT(MSG_2_LINE("等待", "卸下絲料"));     //"Wait for filament unload"
373 562
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT        = _UxGT(MSG_3_LINE("插入絲料", "並按鍵", "繼續 ..."));     //"Insert filament and press button to continue..."
374
-    PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT          = _UxGT(MSG_2_LINE("按下按鈕來", "加熱噴嘴."));     // "Press button to heat nozzle."
563
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT          = _UxGT(MSG_2_LINE("按下按鈕", "加熱噴嘴."));     // "Press button to heat nozzle."
375 564
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING       = _UxGT(MSG_2_LINE("加熱噴嘴", "請等待 ..."));     // "Heating nozzle Please wait..."
376 565
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD          = _UxGT(MSG_2_LINE("等待", "進料"));     //"Wait for filament load"
377 566
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE         = _UxGT(MSG_2_LINE("等待", "絲料清除"));     // "Wait for filament purge"
567
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE    = _UxGT(MSG_2_LINE("按下完成","絲料清除")); //"Press button to filament purge"
378 568
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME        = _UxGT(MSG_2_LINE("等待列印", "恢復"));     //"Wait for print to resume"
379 569
   #else // LCD_HEIGHT < 4
570
+    PROGMEM Language_Str MSG_ADVANCED_PAUSE_WAITING        = _UxGT(MSG_1_LINE("按下繼續.."));   //"Click to continue"
571
+    PROGMEM Language_Str MSG_PAUSE_PRINT_INIT              = _UxGT(MSG_1_LINE("停車中 ..."));     //"Parking..."
380 572
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_INIT          = _UxGT(MSG_1_LINE("請等待 ..."));     //"Please wait..."
381
-    PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD        = _UxGT(MSG_1_LINE("退出中 ..."));     //"Ejecting..."
382 573
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_INSERT        = _UxGT(MSG_1_LINE("插入並點擊"));     //"Insert and Click"
383
-    PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING       = _UxGT(MSG_1_LINE("加熱中 ..."));     // "Heating..."
574
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEAT          = _UxGT(MSG_1_LINE("按下加熱.."));     //"Click to heat"
575
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_HEATING       = _UxGT(MSG_1_LINE("加熱中 ..."));     //"Heating..."
576
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_UNLOAD        = _UxGT(MSG_1_LINE("退出中 ..."));     //"Ejecting..."
384 577
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_LOAD          = _UxGT(MSG_1_LINE("載入中 ..."));     //"Loading..."
385
-    PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE         = _UxGT(MSG_1_LINE("清除中 ..."));     // "Purging..."
578
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_PURGE         = _UxGT(MSG_1_LINE("清除中 ..."));     //"Purging..."
579
+    PROGMEM Language_Str MSG_FILAMENT_CHANGE_CONT_PURGE    = _UxGT(MSG_1_LINE("按下完成.."));     //"Click to finish"
386 580
     PROGMEM Language_Str MSG_FILAMENT_CHANGE_RESUME        = _UxGT(MSG_1_LINE("恢復中 ..."));     //"Resuming..."
387 581
   #endif // LCD_HEIGHT < 4
582
+
583
+  PROGMEM Language_Str MSG_TMC_DRIVERS                     = _UxGT("TMC Drivers");
584
+  PROGMEM Language_Str MSG_TMC_CURRENT                     = _UxGT("Driver Current");
585
+  PROGMEM Language_Str MSG_TMC_HYBRID_THRS                 = _UxGT("Hybrid Threshold");
586
+  PROGMEM Language_Str MSG_TMC_HOMING_THRS                 = _UxGT("Sensorless Homing");
587
+  PROGMEM Language_Str MSG_TMC_STEPPING_MODE               = _UxGT("Stepping Mode");
588
+  PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED             = _UxGT("StealthChop Enabled");
589
+  PROGMEM Language_Str MSG_SERVICE_RESET                   = _UxGT("Reset");
590
+  PROGMEM Language_Str MSG_SERVICE_IN                      = _UxGT(" in:");
591
+  PROGMEM Language_Str MSG_BACKLASH                        = _UxGT("Backlash");
592
+  PROGMEM Language_Str MSG_BACKLASH_A                      = LCD_STR_A;
593
+  PROGMEM Language_Str MSG_BACKLASH_B                      = LCD_STR_B;
594
+  PROGMEM Language_Str MSG_BACKLASH_C                      = LCD_STR_C;
595
+  PROGMEM Language_Str MSG_BACKLASH_CORRECTION             = _UxGT("Correction");
596
+  PROGMEM Language_Str MSG_BACKLASH_SMOOTHING              = _UxGT("Smoothing");
388 597
 }
598
+
599
+#if FAN_COUNT == 1
600
+  #define MSG_FIRST_FAN_SPEED       MSG_FAN_SPEED
601
+  #define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED
602
+#else
603
+  #define MSG_FIRST_FAN_SPEED       MSG_FAN_SPEED_N
604
+  #define MSG_FIRST_EXTRA_FAN_SPEED MSG_EXTRA_FAN_SPEED_N
605
+#endif

Loading…
Откажи
Сачувај