Multi-line comments cleanup (#19535)

Marlin/Configuration.h

@@ -34,7 +34,6 @@
  * - Extra features
  *
  * Advanced settings can be found in Configuration_adv.h
- *
  */
 #define CONFIGURATION_H_VERSION 020007
 
@@ -855,7 +854,6 @@
  *    - For simple switches connect...
  *      - normally-closed switches to GND and D32.
  *      - normally-open switches to 5V and D32.
- *
  */
 //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
 
@@ -1567,7 +1565,6 @@
  *
  *   Caveats: The ending Z should be the same as starting Z.
  * Attention: EXPERIMENTAL. G-code arguments may change.
- *
  */
 //#define NOZZLE_CLEAN_FEATURE
 
@@ -1720,7 +1717,6 @@
  *
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
- *
  */
 //#define SDSUPPORT
 
@@ -2343,7 +2339,6 @@
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.
- *
  */
 //#define RGB_LED
 //#define RGBW_LED

Marlin/Configuration_adv.h

@@ -29,7 +29,6 @@
  * Some of these settings can damage your printer if improperly set!
  *
  * Basic settings can be found in Configuration.h
- *
  */
 #define CONFIGURATION_ADV_H_VERSION 020007
 
@@ -738,7 +737,6 @@
    *               | 4   3 | 1   4 | 2   1 | 3   2 |
    *               |       |       |       |       |
    *               | 1   2 | 2   3 | 3   4 | 4   1 |
-   *
    */
   #ifndef Z_STEPPER_ALIGN_XY
     //#define Z_STEPPERS_ORIENTATION 0
@@ -1954,7 +1952,6 @@
  * Be sure to turn off auto-retract during filament change.
  *
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
- *
  */
 //#define FWRETRACT
 #if ENABLED(FWRETRACT)

Marlin/src/HAL/AVR/HAL.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/AVR/Servo.cpp

@@ -48,7 +48,6 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
- *
  */
 
 #ifdef __AVR__

Marlin/src/HAL/AVR/timers.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -759,7 +759,6 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
-     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -52,7 +52,6 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifdef __SAM3X8E__

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -53,7 +53,6 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
- *
  */
 
 //#define EE_EMU_DEBUG

Marlin/src/HAL/DUE/pinsDebug.h

@@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
- *
  */

Marlin/src/HAL/ESP32/HAL.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/ESP32/ota.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/LINUX/include/serial.h

@@ -33,7 +33,6 @@
  * Generic RingBuffer
  * T type of the buffer array
  * S size of the buffer (must be power of 2)
- *
  */
 template <typename T, uint32_t S> class RingBuffer {
 public:

Marlin/src/HAL/LINUX/servo_private.h

@@ -45,7 +45,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <stdint.h>

Marlin/src/HAL/LPC1768/Servo.h

@@ -46,7 +46,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <Servo.h>

Marlin/src/HAL/LPC1768/timers.h

@@ -21,7 +21,6 @@
 #pragma once
 
 /**
- *
  * HAL For LPC1768
  */
 

Marlin/src/HAL/SAMD51/QSPIFlash.h

@@ -24,7 +24,6 @@
  * THE SOFTWARE.
  *
  * Derived from Adafruit_SPIFlash class with no SdFat references
- *
  */
 
 #pragma once

Marlin/src/HAL/SAMD51/pinsDebug.h

@@ -150,5 +150,4 @@ void pwm_details(int32_t pin) {
  *  93             |  PA10  | QSPI: IO2
  *  94             |  PA11  | QSPI: IO3
  *  95             |  PB31  | SD: DETECT
- *
  */

Marlin/src/HAL/STM32F1/onboard_sd.cpp

@@ -9,7 +9,6 @@
  * No restriction on use. You can use, modify and redistribute it for
  * personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
  * Redistributions of source code must retain the above copyright notice.
- *
  */
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp

@@ -22,7 +22,6 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
- *
  */
 
 #if defined(STM32GENERIC) && defined(STM32F7)
@@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P
 /**
  * reads a value from the TMC26X status register. The value is not obtained directly but can then
  * be read by the various status routines.
- *
  */
 void TMC26XStepper::readStatus(char read_value) {
   uint32_t old_driver_configuration_register_value = driver_configuration_register_value;

Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h

@@ -22,7 +22,6 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  * THE SOFTWARE.
- *
  */
 #pragma once
 

Marlin/src/HAL/TEENSY35_36/timers.h

@@ -16,6 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/TEENSY40_41/timers.h

@@ -16,6 +16,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/shared/servo.cpp

@@ -48,7 +48,6 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
- *
  */
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/shared/servo.h

@@ -41,7 +41,6 @@
  */
 
 /**
- *
  * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
  * The servos are pulsed in the background using the value most recently written using the write() method
  *

Marlin/src/core/language.h

@@ -348,7 +348,6 @@
  * However, internal to Marlin E0/T0 is the first tool, and
  * most board silkscreens say "E0." Zero-based labels will
  * make these indexes consistent but this defies expectation.
- *
  */
 #if ENABLED(NUMBER_TOOLS_FROM_0)
   #define LCD_FIRST_TOOL 0

Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@@ -236,9 +236,7 @@
     }
 
     /**
-     *
      * Generic case of a line crossing both X and Y Mesh lines.
-     *
      */
 
     xy_int8_t cnt = (istart - iend).ABS();

Marlin/src/feature/encoder_i2c.cpp

@@ -816,7 +816,6 @@ int8_t I2CPositionEncodersMgr::parse() {
  *    Y       Report on Y axis encoder, if present.
  *    Z       Report on Z axis encoder, if present.
  *    E       Report on E axis encoder, if present.
- *
  */
 void I2CPositionEncodersMgr::M860() {
   if (parse()) return;
@@ -846,7 +845,6 @@ void I2CPositionEncodersMgr::M860() {
  *    Y       Report on Y axis encoder, if present.
  *    Z       Report on Z axis encoder, if present.
  *    E       Report on E axis encoder, if present.
- *
  */
 void I2CPositionEncodersMgr::M861() {
   if (parse()) return;
@@ -875,7 +873,6 @@ void I2CPositionEncodersMgr::M861() {
  *    Y       Report on Y axis encoder, if present.
  *    Z       Report on Z axis encoder, if present.
  *    E       Report on E axis encoder, if present.
- *
  */
 void I2CPositionEncodersMgr::M862() {
   if (parse()) return;
@@ -905,7 +902,6 @@ void I2CPositionEncodersMgr::M862() {
  *    Y       Report on Y axis encoder, if present.
  *    Z       Report on Z axis encoder, if present.
  *    E       Report on E axis encoder, if present.
- *
  */
 void I2CPositionEncodersMgr::M863() {
   if (parse()) return;

Marlin/src/feature/mmu2/mmu2.cpp

@@ -710,13 +710,11 @@ void MMU2::tool_change(const uint8_t index) {
 }
 
 /**
- *
  * Handle special T?/Tx/Tc commands
  *
  * T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically
  * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load.
  * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated.
- *
  */
 void MMU2::tool_change(const char* special) {
   if (!enabled) return;
@@ -922,9 +920,7 @@ void MMU2::filament_runout() {
   }
 
   /**
-   *
    * Switch material and load to nozzle
-   *
    */
   bool MMU2::load_filament_to_nozzle(const uint8_t index) {
 

Marlin/src/feature/twibus.h

@@ -48,7 +48,6 @@ typedef void (*twiRequestFunc_t)();
  *  For more information see
  *    - https://marlinfw.org/docs/gcode/M260.html
  *    - https://marlinfw.org/docs/gcode/M261.html
- *
  */
 class TWIBus {
   private:

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -160,7 +160,6 @@
  *  E  By default G29 will engage the Z probe, test the bed, then disengage.
  *     Include "E" to engage/disengage the Z probe for each sample.
  *     There's no extra effect if you have a fixed Z probe.
- *
  */
 G29_TYPE GcodeSuite::G29() {
 

Marlin/src/gcode/bedlevel/mbl/G29.cpp

@@ -57,7 +57,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM("
  *  S3 In Jn Zn.nn  Manually modify a single point
  *  S4 Zn.nn        Set z offset. Positive away from bed, negative closer to bed.
  *  S5              Reset and disable mesh
- *
  */
 void GcodeSuite::G29() {
 

Marlin/src/gcode/calibrate/G28.cpp

@@ -192,7 +192,6 @@
  *  X   Home to the X endstop
  *  Y   Home to the Y endstop
  *  Z   Home to the Z endstop
- *
  */
 void GcodeSuite::G28() {
   DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING));

Marlin/src/gcode/control/M999.cpp

@@ -34,7 +34,6 @@
  *
  * Sending "M999 S1" will resume printing without flushing the
  * existing command buffer.
- *
  */
 void GcodeSuite::M999() {
   marlin_state = MF_RUNNING;

Marlin/src/gcode/feature/L6470/M906.cpp

@@ -33,7 +33,6 @@
 #include "../../../core/debug_out.h"
 
 /**
- *
  * M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the
  *       PWMs to the steppers
  *
@@ -56,7 +55,6 @@
  *
  * L6470 is used in the STEP-CLOCK mode.  KVAL_HOLD is the only KVAL_xxx
  * that affects the effective voltage seen by the stepper.
- *
  */
 
 /**

Marlin/src/gcode/feature/L6470/M916-918.cpp

@@ -37,7 +37,6 @@
 #include "../../../core/debug_out.h"
 
 /**
- *
  * M916: increase KVAL_HOLD until get thermal warning
  *       NOTE - on L6474 it is TVAL that is used
  *
@@ -62,7 +61,6 @@
  *
  * D - time (in seconds) to run each setting of KVAL_HOLD/TVAL
  *     optional - defaults to zero (runs each setting once)
- *
  */
 
 /**
@@ -187,7 +185,6 @@ void GcodeSuite::M916() {
 }
 
 /**
- *
  * M917: Find minimum current thresholds
  *
  *   Decrease OCD current until overcurrent error
@@ -214,7 +211,6 @@ void GcodeSuite::M916() {
  *
  * K - value for KVAL_HOLD (0 - 255) (ignored for L6474)
  *     optional - will report current value from driver if not specified
- *
  */
 void GcodeSuite::M917() {
 
@@ -522,7 +518,6 @@ void GcodeSuite::M917() {
 }
 
 /**
- *
  * M918: increase speed until error or max feedrate achieved (as shown in configuration.h))
  *
  * J - select which driver(s) to monitor on multi-driver axis
@@ -543,7 +538,6 @@ void GcodeSuite::M917() {
  *
  * M - value for microsteps (1 - 128) (optional)
  *     optional - will report current value from driver if not specified
- *
  */
 void GcodeSuite::M918() {
 

Marlin/src/gcode/feature/i2c/M260_M261.cpp

@@ -42,7 +42,6 @@
  *
  *  M260 S1 ; Send the buffered data and reset the buffer
  *  M260 R1 ; Reset the buffer without sending data
- *
  */
 void GcodeSuite::M260() {
   // Set the target address

Marlin/src/gcode/feature/pause/M603.cpp

@@ -39,7 +39,6 @@
  *  T[toolhead] - Select extruder to configure, active extruder if not specified
  *  U[distance] - Retract distance for removal, for the specified extruder
  *  L[distance] - Extrude distance for insertion, for the specified extruder
- *
  */
 void GcodeSuite::M603() {
 

Marlin/src/gcode/gcode.h

@@ -289,7 +289,6 @@
  * "T" Codes
  *
  * T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
- *
  */
 
 #include "../inc/MarlinConfig.h"

Marlin/src/gcode/sd/M32.cpp

@@ -38,7 +38,6 @@
  *    M32 !PATH/TO/FILE.GCO#      ; Start FILE.GCO
  *    M32 P !PATH/TO/FILE.GCO#    ; Start FILE.GCO as a procedure
  *    M32 S60 !PATH/TO/FILE.GCO#  ; Start FILE.GCO at byte 60
- *
  */
 void GcodeSuite::M32() {
   if (IS_SD_PRINTING()) planner.synchronize();

Marlin/src/inc/Conditionals_LCD.h

@@ -512,7 +512,6 @@
  *  HOTENDS      - Number of hotends, whether connected or separate
  *  E_STEPPERS   - Number of actual E stepper motors
  *  E_MANUAL     - Number of E steppers for LCD move options
- *
  */
 
 #if EXTRUDERS == 0

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -11,7 +11,6 @@
  * any later version.  The code is distributed WITHOUT ANY WARRANTY;
  * without even the implied warranty of MERCHANTABILITY or FITNESS
  * FOR A PARTICULAR PURPOSE.  See the GNU GPL for more details.
- *
  */
 
 /**

Marlin/src/lcd/dogm/status_screen_lite_ST7920.h

@@ -11,7 +11,6 @@
  * any later version.  The code is distributed WITHOUT ANY WARRANTY;
  * without even the implied warranty of MERCHANTABILITY or FITNESS
  * FOR A PARTICULAR PURPOSE.  See the GNU GPL for more details.
- *
  */
 #pragma once
 

Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp

@@ -51,7 +51,6 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -1632,7 +1632,6 @@ void update_variable() {
  * TODO: New code can follow the pattern of menu_media.cpp
  * and rely on Marlin caching for performance. No need to
  * cache files here.
- *
  */
 
 #ifndef strcasecmp_P

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp

@@ -42,7 +42,6 @@ constexpr uint32_t flash_eeprom_version = 1;
  * 0       16       DATA STORAGE AREA
  * 16      1        VERSIONING DATA
  * 17      inf      MEDIA STORAGE AREA
- *
  */
 
 #define DATA_STORAGE_SIZE_64K

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h

@@ -32,7 +32,6 @@
  *     Selecting an LCD Display
  *     Version 2.1
  *     Issue Date: 2017-11-14
- *
  */
 #define COMPUTE_REGS_FROM_DATASHEET \
     constexpr uint16_t Hoffset              = thfp + thb - 1; \

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp

@@ -109,7 +109,6 @@ namespace FTDI {
    *  - Handles auto-repetition by sending onTouchHeld to the active screen periodically.
    *  - Plays touch feedback "click" sounds when appropriate.
    *  - Performs debouncing to supress spurious touch events.
-   *
    */
   void EventLoop::process_events() {
     // If the LCD is processing commands, don't check

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h

@@ -49,7 +49,6 @@
  *       ...
  *     }
  *   }
- *
  */
 
 class PolyReader {

Marlin/src/lcd/extui/ui_api.h

@@ -375,7 +375,6 @@ namespace ExtUI {
  *   constexpr float increment = 10;
  *
  *   UI_INCREMENT(TargetTemp_celsius, E0)
- *
  */
 #define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__)
 #define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__)

Marlin/src/lcd/language/language_an.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_bg.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_5

Marlin/src/lcd/language/language_ca.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_ca {
   using namespace Language_en; // Inherit undefined strings from English

Marlin/src/lcd/language/language_cz.h

@@ -31,7 +31,6 @@
  * Translated by Petr Zahradnik, Computer Laboratory
  * Blog and video blog Zahradnik se bavi
  * https://www.zahradniksebavi.cz
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_CZ

Marlin/src/lcd/language/language_da.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_de.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 namespace Language_de {

Marlin/src/lcd/language/language_el.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_GREEK

Marlin/src/lcd/language/language_el_gr.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_GREEK

Marlin/src/lcd/language/language_en.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define en 1234

Marlin/src/lcd/language/language_es.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 namespace Language_es {

Marlin/src/lcd/language/language_eu.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_fi.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_fr.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_gl.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_hr.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.

Marlin/src/lcd/language/language_hu.h

@@ -29,7 +29,6 @@
  * A Magyar fordítást készítette: AntoszHUN
  *
  *
- *
  */
 
 namespace Language_hu {

Marlin/src/lcd/language/language_it.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_jp_kana.h

@@ -27,7 +27,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 //#define DISPLAY_CHARSET_ISO10646_KANA

Marlin/src/lcd/language/language_ko_KR.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_ko_KR {
   using namespace Language_en; // Inherit undefined strings from English

Marlin/src/lcd/language/language_nl.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_pl.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_PL

Marlin/src/lcd/language/language_pt.h

@@ -27,7 +27,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
  #define DISPLAY_CHARSET_ISO10646_1

Marlin/src/lcd/language/language_pt_br.h

@@ -27,7 +27,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_pt_br {
   using namespace Language_en; // Inherit undefined strings from English

Marlin/src/lcd/language/language_ru.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 #define DISPLAY_CHARSET_ISO10646_5
 

Marlin/src/lcd/language/language_sk.h

@@ -30,7 +30,6 @@
  *
  * Translated by Michal Holeš, Farma MaM
  * https://www.facebook.com/farmamam
- *
  */
 #define DISPLAY_CHARSET_ISO10646_SK
 

Marlin/src/lcd/language/language_test.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 // Select ONE of the following Mappers.

Marlin/src/lcd/language/language_tr.h

@@ -30,7 +30,6 @@
  * Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim;
  * Contact for issues and corrections in this translation file;
  * Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_TR

Marlin/src/lcd/language/language_uk.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 
 #define DISPLAY_CHARSET_ISO10646_5

Marlin/src/lcd/language/language_vi.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_vi {
   using namespace Language_en; // Inherit undefined strings from English

Marlin/src/lcd/language/language_zh_CN.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_zh_CN {
   using namespace Language_en;  // Inherit undefined strings from English

Marlin/src/lcd/language/language_zh_TW.h

@@ -26,7 +26,6 @@
  *
  * LCD Menu Messages
  * See also https://marlinfw.org/docs/development/lcd_language.html
- *
  */
 namespace Language_zh_TW {
   using namespace Language_en;  // Inherit undefined strings from English

Marlin/src/lcd/menu/menu_filament.cpp

@@ -101,9 +101,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
 }
 
 /**
- *
  * "Change Filament" submenu
- *
  */
 #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
 

Marlin/src/libs/least_squares_fit.cpp

@@ -29,7 +29,6 @@
  * it saves roughly 10K of program memory. It also does not require all of
  * coordinates to be present during the calculations. Each point can be
  * probed and then discarded.
- *
  */
 
 #include "../inc/MarlinConfig.h"

Marlin/src/libs/least_squares_fit.h

@@ -30,7 +30,6 @@
  * it saves roughly 10K of program memory.   And even better...  the data
  * fed into the algorithm does not need to all be present at the same time.
  * A point can be probed and its values fed into the algorithm and then discarded.
- *
  */
 
 #include "../inc/MarlinConfig.h"

Marlin/src/module/planner.cpp

@@ -339,7 +339,6 @@ void Planner::init() {
      *  const uint32_t r = _BV(24) - x * d;                             // Estimate remainder
      *  if (r >= d) x++;                                                // Check whether to adjust result
      *  return uint32_t(x);                                             // x holds the proper estimation
-     *
      */
     static uint32_t get_period_inverse(uint32_t d) {
 
@@ -2243,7 +2242,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
       #define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e)
 
       /**
-       *
        * Use LIN_ADVANCE for blocks if all these are true:
        *
        * esteps             : This is a print move, because we checked for A, B, C steps before.

Marlin/src/module/planner_bezier.cpp

@@ -24,7 +24,6 @@
  * planner_bezier.cpp
  *
  * Compute and buffer movement commands for bezier curves
- *
  */
 
 #include "../inc/MarlinConfig.h"

Marlin/src/module/planner_bezier.h

@@ -25,7 +25,6 @@
  * planner_bezier.h
  *
  * Compute and buffer movement commands for Bézier curves
- *
  */
 
 #include "../core/types.h"

Marlin/src/module/probe.cpp

@@ -729,7 +729,6 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise
      * when starting up the machine or rebooting the board.
      * There's no way to know where the nozzle is positioned until
      * homing has been done - no homing with z-probe without init!
-     *
      */
     STOW_Z_SERVO();
   }

Marlin/src/module/settings.cpp

@@ -33,7 +33,6 @@
  * ALSO: Variables in the Store and Retrieve sections must be in the same order.
  *       If a feature is disabled, some data must still be written that, when read,
  *       either sets a Sane Default, or results in No Change to the existing value.
- *
  */
 
 // Change EEPROM version if the structure changes

Marlin/src/module/thermistor/thermistor_30.h

@@ -26,11 +26,11 @@
 // Resistance Tolerance     + / -1%
 // B Value             3950K at 25/50 deg. C
 // B Value Tolerance         + / - 1%
-// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083) 
+// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083)
 // Temperature setting time 10 min to determine the 12Bit ADC value on the surface. (le3tspeak)
 const temp_entry_t temptable_30[] PROGMEM = {
-  { OV(   1), 938 }, 
-  { OV( 298), 125 }, // 1193 - 125° 
+  { OV(   1), 938 },
+  { OV( 298), 125 }, // 1193 - 125°
   { OV( 321), 121 }, // 1285 - 121°
   { OV( 348), 117 }, // 1392 - 117°
   { OV( 387), 113 }, // 1550 - 113°

Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h

@@ -27,7 +27,6 @@
  * Applies to the following boards:
  *
  *  BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
- *
  */
 
 #if NOT_TARGET(MCU_LPC1768)

Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h

@@ -27,7 +27,6 @@
  * Applies to the following boards:
  *
  *  BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
- *
  */
 
 #if NOT_TARGET(MCU_LPC1768)

Marlin/src/pins/lpc1768/pins_MKS_SBASE.h

@@ -372,7 +372,6 @@
  *   P1_31 - not 5V tolerant - EXP1
  *   P0_27 - open collector  - EXP2
  *   P0_28 - open collector  - EXP2
- *
  */
 
 /**
@@ -387,5 +386,4 @@
  *   P0_03 - AUX1
  *   P0_29 - Port -1
  *   P0_30 - USB
- *
  */

Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h

@@ -31,7 +31,6 @@
  *  RAMPS_14_EFF (Hotend, Fan0, Fan1)
  *  RAMPS_14_EEF (Hotend0, Hotend1, Fan)
  *  RAMPS_14_SF  (Spindle, Controller Fan)
- *
  */
 
 // Numbers in parentheses () are the corresponding mega2560 pin numbers

Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/pins/lpc1769/pins_MKS_SGEN.h

@@ -26,7 +26,6 @@
  *
  * The pins diagram can be found and the following URL:
  * https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf
- *
  */
 
 #if NOT_TARGET(MCU_LPC1769)

Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h

@@ -166,7 +166,6 @@
  *
  * A remote SD card is currently not supported because the pins routed to the EXP2
  * connector are shared with the onboard SD card.
- *
  */
 
 #if ENABLED(CR10_STOCKDISPLAY)

Marlin/src/pins/mega/pins_INTAMSYS40.h

@@ -137,7 +137,6 @@
 ///////////////////// SPARE HEADERS //////////////
 
 /**
- *
  * J25
  * 1 D54
  * 2 D55

Marlin/src/pins/mega/pins_MINITRONICS.h

@@ -29,7 +29,6 @@
  * Rev B   2 JAN 2017
  *
  *  Added pin definitions for M3, M4 & M5 spindle control commands
- *
  */
 
 #if NOT_TARGET(__AVR_ATmega1281__)

Marlin/src/pins/pinsDebug.h

@@ -31,7 +31,6 @@
  *
  *  Both passes use the same pin list.  The list contains two macro names. The
  *  actual macro definitions are changed depending on which pass is being done.
- *
  */
 
 // first pass - put the name strings into FLASH