Clean up trailing whitespace

Marlin/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -1636,7 +1636,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -1775,7 +1775,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -1624,7 +1624,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -1607,7 +1607,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -1617,7 +1617,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -1607,7 +1607,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Cartesio/Configuration.h

@@ -1615,7 +1615,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -1626,7 +1626,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Felix/Configuration.h

@@ -1598,7 +1598,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -1598,7 +1598,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -1621,7 +1621,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -1631,7 +1631,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -1620,7 +1620,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -1644,7 +1644,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -1620,7 +1620,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -1620,7 +1620,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/SCARA/Configuration.h

@@ -1628,7 +1628,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -1647,7 +1647,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -1672,7 +1672,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -1651,7 +1651,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -1616,7 +1616,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -1750,7 +1750,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -1743,7 +1743,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/generic/Configuration.h

@@ -1738,7 +1738,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -1741,7 +1741,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -1741,7 +1741,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -1750,7 +1750,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -1630,7 +1630,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/makibox/Configuration.h

@@ -1619,7 +1619,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -1611,7 +1611,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.

Marlin/example_configurations/wt150/Configuration.h

@@ -1621,7 +1621,7 @@
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs
- *  more current than the Arduino 5V linear regulator can produce. 
+ *  more current than the Arduino 5V linear regulator can produce.
  * *** CAUTION ***
  *
  * LED Type. Enable only one of the following two options.