MKS UI prelim. cleanup (#20763)

Marlin/src/lcd/extui/lib/mks_ui/SPIFlashStorage.cpp

@@ -169,7 +169,6 @@ void SPIFlashStorage::endWrite() {
 
 void SPIFlashStorage::savePage(uint8_t* buffer) {
   W25QXX.SPI_FLASH_BufferWrite(buffer, m_startAddress + (SPI_FLASH_PageSize * m_currentPage), SPI_FLASH_PageSize);
-
   // Test env
   // char fname[256];
   // snprintf(fname, sizeof(fname), "./pages/page-%03d.data", m_currentPage);
@@ -180,7 +179,6 @@ void SPIFlashStorage::savePage(uint8_t* buffer) {
 
 void SPIFlashStorage::loadPage(uint8_t* buffer) {
   W25QXX.SPI_FLASH_BufferRead(buffer, m_startAddress + (SPI_FLASH_PageSize * m_currentPage), SPI_FLASH_PageSize);
-
   // Test env
   // char fname[256];
   // snprintf(fname, sizeof(fname), "./pages/page-%03d.data", m_currentPage);

Marlin/src/lcd/extui/lib/mks_ui/SPI_TFT.cpp

@@ -73,8 +73,6 @@ void TFT::LCD_clear(uint16_t color) {
   tftio.WriteMultiple(color, (uint32_t)(TFT_WIDTH) * (TFT_HEIGHT));
 }
 
-extern unsigned char bmp_public_buf[17 * 1024];
-
 void TFT::LCD_Draw_Logo() {
   #if HAS_LOGO_IN_FLASH
     setWindow(0, 0, TFT_WIDTH, TFT_HEIGHT);

Marlin/src/lcd/extui/lib/mks_ui/draw_about.cpp

@@ -25,16 +25,12 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../inc/MarlinConfig.h"
 
 extern lv_group_t *g;
 static lv_obj_t *scr;
-static lv_obj_t *fw_type, *board; //*fw_version;
+static lv_obj_t *fw_type, *board;
 
 enum { ID_A_RETURN = 1 };
 
@@ -52,9 +48,6 @@ void lv_draw_about(void) {
   scr = lv_screen_create(ABOUT_UI);
   lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_A_RETURN);
 
-  //fw_version = lv_label_create(scr, SHORT_BUILD_VERSION);
-  //lv_obj_align(fw_version, nullptr, LV_ALIGN_CENTER, 0, -60);
-
   fw_type = lv_label_create(scr, "Firmware: Marlin " SHORT_BUILD_VERSION);
   lv_obj_align(fw_type, nullptr, LV_ALIGN_CENTER, 0, -20);
 

Marlin/src/lcd/extui/lib/mks_ui/draw_about.h

@@ -28,7 +28,6 @@
 extern void lv_draw_about(void);
 extern void lv_clear_about();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_baby_stepping.cpp

@@ -87,7 +87,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       has_adjust_z = 1;
       break;
     case ID_BABY_STEP_Z_N:
-      sprintf_P(baby_buf, PSTR("M290 Z%.3f"), babystep_dist);
+      sprintf_P(baby_buf, PSTR("M290 Z%.3f"), -babystep_dist);
       gcode.process_subcommands_now_P(PSTR(baby_buf));
       has_adjust_z = 1;
       break;
@@ -136,7 +136,6 @@ void lv_draw_baby_stepping(void) {
 }
 
 void disp_baby_step_dist() {
-  // char buf[30] = {0};
   if ((int)(100 * babystep_dist) == 1)
     lv_imgbtn_set_src_both(buttonV, "F:/bmp_baby_move0_01.bin");
   else if ((int)(100 * babystep_dist) == 5)

Marlin/src/lcd/extui/lib/mks_ui/draw_baby_stepping.h

@@ -30,7 +30,6 @@ extern void lv_clear_baby_stepping();
 extern void disp_baby_step_dist();
 extern void disp_z_offset_value();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_change_speed.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../module/planner.h"
 #include "../../../../inc/MarlinConfig.h"
@@ -65,9 +61,6 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
           planner.flow_percentage[0] += uiCfg.stepPrintSpeed;
         else
           planner.flow_percentage[0] = MAX_EXT_SPEED_PERCENT;
-        //planner.e_factor[0]= planner.flow_percentage[0]*0.01;
-        //planner.flow_percentage[1] = planner.flow_percentage[0];
-        //planner.e_factor[1]= planner.flow_percentage[1]*0.01;
         planner.refresh_e_factor(0);
         #if HAS_MULTI_EXTRUDER
           planner.flow_percentage[1] = planner.flow_percentage[0];
@@ -88,9 +81,6 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
           planner.flow_percentage[0] -= uiCfg.stepPrintSpeed;
         else
           planner.flow_percentage[0] = MIN_EXT_SPEED_PERCENT;
-        //planner.e_factor[0]= planner.flow_percentage[0] * 0.01;
-        //planner.flow_percentage[1] = planner.flow_percentage[0];
-        //planner.e_factor[1]= planner.flow_percentage[1] * 0.01;
         planner.refresh_e_factor(0);
         #if HAS_MULTI_EXTRUDER
           planner.flow_percentage[1] = planner.flow_percentage[0];
@@ -143,9 +133,9 @@ void lv_draw_change_speed(void) {
   lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_C_RETURN);
 
   // Create labels on the image buttons
-  labelMov              = lv_label_create_empty(buttonMov);
-  labelExt              = lv_label_create_empty(buttonExt);
-  labelStep             = lv_label_create_empty(buttonStep);
+  labelMov  = lv_label_create_empty(buttonMov);
+  labelExt  = lv_label_create_empty(buttonExt);
+  labelStep = lv_label_create_empty(buttonStep);
 
   #if HAS_ROTARY_ENCODER
     if (gCfgItems.encoder_enable) {

Marlin/src/lcd/extui/lib/mks_ui/draw_change_speed.h

@@ -34,7 +34,6 @@ extern void disp_speed_step();
 extern void disp_print_speed();
 extern void disp_speed_type();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.cpp

@@ -31,11 +31,6 @@
 #include "draw_ui.h"
 #include <lv_conf.h>
 
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
-
 #include "../../../../sd/cardreader.h"
 #include "../../../../gcode/queue.h"
 #include "../../../../module/temperature.h"
@@ -100,7 +95,6 @@ static void btn_ok_event_cb(lv_obj_t *btn, lv_event_t event) {
         card.openFileRead(cur_name);
         if (card.isFileOpen()) {
           feedrate_percentage = 100;
-          //saved_feedrate_percentage = feedrate_percentage;
           planner.flow_percentage[0] = 100;
           planner.e_factor[0]        = planner.flow_percentage[0] * 0.01f;
           #if HAS_MULTI_EXTRUDER
@@ -123,20 +117,8 @@ static void btn_ok_event_cb(lv_obj_t *btn, lv_event_t event) {
     lv_draw_ready_print();
 
     #if ENABLED(SDSUPPORT)
-      //card.endFilePrint();
-      //wait_for_heatup = false;
       uiCfg.print_state           = IDLE;
       card.flag.abort_sd_printing = true;
-      //queue.clear();
-      //quickstop_stepper();
-      //print_job_timer.stop();
-      //thermalManager.disable_all_heaters();
-
-      //#if ENABLED(POWER_LOSS_RECOVERY)
-      //  recovery.purge();
-      //#endif
-      //queue.enqueue_now_P(PSTR("G91\nG1 Z10\nG90\nG28 X0 Y0"));
-      //queue.inject_P(PSTR("G91\nG1 Z10\nG90\nG28 X0 Y0\nM84\nM107"));
     #endif
   }
   else if (DIALOG_IS(TYPE_FINISH_PRINT)) {
@@ -244,19 +226,19 @@ void lv_draw_dialog(uint8_t type) {
   else if (DIALOG_IS(WIFI_ENABLE_TIPS)) {
     btnCancel = lv_button_btn_create(scr, BTN_OK_X + 90, BTN_OK_Y, 100, 50, btn_cancel_event_cb);
     lv_obj_t *labelCancel = lv_label_create_empty(btnCancel);
-    lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+    lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
   }
   else if (DIALOG_IS(TRANSFER_NO_DEVICE)) {
     btnCancel = lv_button_btn_create(scr, BTN_OK_X + 90, BTN_OK_Y, 100, 50, btn_cancel_event_cb);
     lv_obj_t *labelCancel = lv_label_create_empty(btnCancel);
-    lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+    lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
   }
   #if ENABLED(MKS_WIFI_MODULE)
     else if (DIALOG_IS(TYPE_UPLOAD_FILE)) {
       if (upload_result == 2) {
         btnCancel = lv_button_btn_create(scr, BTN_OK_X + 90, BTN_OK_Y, 100, 50, btn_cancel_event_cb);
         lv_obj_t *labelCancel = lv_label_create_empty(btnCancel);
-        lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+        lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
       }
       else if (upload_result == 3) {
         btnOk = lv_button_btn_create(scr, BTN_OK_X + 90, BTN_OK_Y, 100, 50, btn_ok_event_cb);
@@ -268,7 +250,7 @@ void lv_draw_dialog(uint8_t type) {
   else if (DIALOG_IS(TYPE_FILAMENT_LOAD_HEAT, TYPE_FILAMENT_UNLOAD_HEAT)) {
     btnCancel = lv_button_btn_create(scr, BTN_OK_X+90, BTN_OK_Y, 100, 50, btn_cancel_event_cb);
     lv_obj_t *labelCancel = lv_label_create_empty(btnCancel);
-    lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+    lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
 
     tempText1 = lv_label_create_empty(scr);
     filament_sprayer_temp();
@@ -281,7 +263,7 @@ void lv_draw_dialog(uint8_t type) {
   else if (DIALOG_IS(TYPE_FILAMENT_LOADING, TYPE_FILAMENT_UNLOADING)) {
     btnCancel = lv_button_btn_create(scr, BTN_OK_X + 90, BTN_OK_Y, 100, 50, btn_cancel_event_cb);
     lv_obj_t *labelCancel = lv_label_create_empty(btnCancel);
-    lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+    lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
 
     filament_bar = lv_bar_create(scr, nullptr);
     lv_obj_set_pos(filament_bar, (TFT_WIDTH-400)/2, ((TFT_HEIGHT - titleHeight)-40)/2);
@@ -303,7 +285,7 @@ void lv_draw_dialog(uint8_t type) {
     }
     else {
       lv_label_set_text(labelOk, print_file_dialog_menu.confirm);  // Set the labels text
-      lv_label_set_text(labelCancel, print_file_dialog_menu.cancle);
+      lv_label_set_text(labelCancel, print_file_dialog_menu.cancel);
     }
   }
   if (DIALOG_IS(TYPE_PRINT_FILE)) {
@@ -314,7 +296,7 @@ void lv_draw_dialog(uint8_t type) {
     lv_obj_align(labelFile, nullptr, LV_ALIGN_CENTER, 0, -60);
   }
   else if (DIALOG_IS(TYPE_STOP)) {
-    lv_label_set_text(labelDialog, print_file_dialog_menu.cancle_print);
+    lv_label_set_text(labelDialog, print_file_dialog_menu.cancel_print);
     lv_obj_align(labelDialog, nullptr, LV_ALIGN_CENTER, 0, -20);
   }
   else if (DIALOG_IS(TYPE_FINISH_PRINT)) {

Marlin/src/lcd/extui/lib/mks_ui/draw_dialog.h

@@ -33,7 +33,7 @@ enum {
   DIALOG_TYPE_M80_FAIL,
   DIALOG_TYPE_MESSAGE_ERR1,
 
-  DIALOG_TYPE_UPDATE_ESP_FIRMARE,
+  DIALOG_TYPE_UPDATE_ESP_FIRMWARE,
   DIALOG_TYPE_UPDATE_ESP_DATA,
   DIALOG_TYPE_UPLOAD_FILE,
   DIALOG_TYPE_UNBIND,
@@ -85,7 +85,6 @@ extern void filament_sprayer_temp();
 extern void filament_dialog_handle();
 extern void lv_filament_setbar();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_error_message.cpp

@@ -27,10 +27,6 @@
 #include <lv_conf.h>
 
 #include "tft_lvgl_configuration.h"
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "SPI_TFT.h"
 #include "mks_hardware_test.h"
@@ -39,25 +35,6 @@
 static lv_obj_t *scr;
 
 void lv_draw_error_message(PGM_P const msg) {
-  #if 0
-    static lv_obj_t *message = nullptr, *kill_message = nullptr, *reset_tips = nullptr;
-
-    scr = lv_screen_create(ERROR_MESSAGE_UI, "");
-
-    if (msg) {
-      message = lv_label_create(scr, msg);
-      lv_obj_align(message, nullptr, LV_ALIGN_CENTER, 0, -50);
-    }
-
-    kill_message = lv_label_create(scr, "PRINTER HALTED");
-    lv_obj_align(kill_message, nullptr, LV_ALIGN_CENTER, 0, -10);
-
-    reset_tips = lv_label_create(scr, "Please Reset");
-    lv_obj_align(reset_tips, nullptr, LV_ALIGN_CENTER, 0, 30);
-
-    lv_task_handler();
-  #endif
-
   SPI_TFT.LCD_clear(0x0000);
   if (msg) disp_string((TFT_WIDTH - strlen(msg) * 16) / 2, 100, msg, 0xFFFF, 0x0000);
   disp_string((TFT_WIDTH - strlen("PRINTER HALTED") * 16) / 2, 140, "PRINTER HALTED", 0xFFFF, 0x0000);

Marlin/src/lcd/extui/lib/mks_ui/draw_error_message.h

@@ -32,7 +32,6 @@
 extern void lv_draw_error_message(PGM_P const msg);
 extern void lv_clear_error_message();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../module/temperature.h"
 #include "../../../../gcode/queue.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_extrusion.h

@@ -33,7 +33,6 @@ extern void disp_ext_speed();
 extern void disp_hotend_temp();
 extern void disp_extru_amount();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_fan.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../module/temperature.h"
 #include "../../../../gcode/queue.h"
@@ -52,35 +48,30 @@ static uint8_t fanSpeed;
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+
   switch (obj->mks_obj_id) {
     case ID_F_ADD:
-      if (fanSpeed + 1 <= 255) {
-        fanSpeed++;
-        sprintf_P(public_buf_l, PSTR("M106 S%d"), fanSpeed);
-        gcode.process_subcommands_now(public_buf_l);
-      }
+      if (fanSpeed < 254) fanSpeed++;
       break;
     case ID_F_DEC:
-      if (fanSpeed > 0) {
-        fanSpeed--;
-        sprintf_P(public_buf_l, PSTR("M106 S%d"), fanSpeed);
-        gcode.process_subcommands_now(public_buf_l);
-      }
+      if (fanSpeed > 0) fanSpeed--;
       break;
     case ID_F_HIGH:
-      gcode.process_subcommands_now_P(PSTR("M106 S255"));
+      fanSpeed = 255;
       break;
     case ID_F_MID:
-      gcode.process_subcommands_now_P(PSTR("M106 S127"));
+      fanSpeed = 127;
       break;
     case ID_F_OFF:
       gcode.process_subcommands_now_P(PSTR("M107"));
-      break;
+      return;
     case ID_F_RETURN:
       clear_cur_ui();
       draw_return_ui();
-      break;
+      return;
   }
+  sprintf_P(public_buf_l, PSTR("M106 S%d"), fanSpeed);
+  gcode.process_subcommands_now(public_buf_l);
 }
 
 void lv_draw_fan(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_fan.h

@@ -29,7 +29,6 @@ extern void lv_draw_fan(void);
 extern void lv_clear_fan();
 extern void disp_fan_value();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_filament_change.cpp

@@ -85,10 +85,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       break;
     case ID_FILAMNT_TYPE:
       #if HAS_MULTI_EXTRUDER
-        if (uiCfg.curSprayerChoose == 0)
-          uiCfg.curSprayerChoose = 1;
-        else if (uiCfg.curSprayerChoose == 1)
-          uiCfg.curSprayerChoose = 0;
+        uiCfg.curSprayerChoose = !uiCfg.curSprayerChoose;
       #endif
       disp_filament_type();
       break;
@@ -100,7 +97,6 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       feedrate_mm_s = (float)uiCfg.moveSpeed_bak;
       if (uiCfg.print_state == PAUSED)
         planner.set_e_position_mm((destination.e = current_position.e = uiCfg.current_e_position_bak));
-        //current_position.e = destination.e = uiCfg.current_e_position_bak;
       thermalManager.temp_hotend[uiCfg.curSprayerChoose].target = uiCfg.desireSprayerTempBak;
 
       clear_cur_ui();

Marlin/src/lcd/extui/lib/mks_ui/draw_filament_change.h

@@ -30,7 +30,6 @@ extern void lv_clear_filament_change();
 extern void disp_filament_type();
 extern void disp_filament_temp();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_home.cpp

@@ -27,10 +27,6 @@
 #include "draw_set.h"
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../gcode/queue.h"
 #include "../../../../inc/MarlinConfig.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_home.h

@@ -28,7 +28,6 @@
 extern void lv_draw_home(void);
 extern void lv_clear_home();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_keyboard.cpp

@@ -73,8 +73,6 @@ static const lv_btnm_ctrl_t kb_ctrl_num_map[] = {
         1, 1, 1, 1, 1};
 
 static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
-  //LV_ASSERT_OBJ(kb, LV_OBJX_NAME);
-
   if (event != LV_EVENT_VALUE_CHANGED) return;
 
   lv_kb_ext_t * ext = (lv_kb_ext_t * )lv_obj_get_ext_attr(kb);
@@ -104,22 +102,18 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
   }
   else if (strcmp(txt, LV_SYMBOL_CLOSE) == 0) {
     if (kb->event_cb != lv_kb_def_event_cb) {
-      //lv_res_t res = lv_event_send(kb, LV_EVENT_CANCEL, nullptr);
-      //if (res != LV_RES_OK) return;
       lv_clear_keyboard();
       draw_return_ui();
     }
     else {
-      lv_kb_set_ta(kb, nullptr); // De-assign the text area  to hide it cursor if needed
+      lv_kb_set_ta(kb, nullptr); // De-assign the text area to hide its cursor if needed
       lv_obj_del(kb);
       return;
     }
-  return;
+    return;
   }
   else if (strcmp(txt, LV_SYMBOL_OK) == 0) {
     if (kb->event_cb != lv_kb_def_event_cb) {
-      //lv_res_t res = lv_event_send(kb, LV_EVENT_APPLY, nullptr);
-      //if (res != LV_RES_OK) return;
       const char * ret_ta_txt = lv_ta_get_text(ext->ta);
       switch (keyboard_value) {
         #if ENABLED(MKS_WIFI_MODULE)
@@ -142,7 +136,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
 
             gCfgItems.wifi_mode_sel = STA_MODEL;
 
-            package_to_wifi(WIFI_PARA_SET, (char *)0, 0);
+            package_to_wifi(WIFI_PARA_SET, (uint8_t *)0, 0);
 
             public_buf_l[0] = 0xA5;
             public_buf_l[1] = 0x09;
@@ -151,7 +145,7 @@ static void lv_kb_event_cb(lv_obj_t *kb, lv_event_t event) {
             public_buf_l[4] = 0x01;
             public_buf_l[5] = 0xFC;
             public_buf_l[6] = 0x00;
-            raw_send_to_wifi(public_buf_l, 6);
+            raw_send_to_wifi((uint8_t*)public_buf_l, 6);
 
             last_disp_state = KEY_BOARD_UI;
             lv_clear_keyboard();
@@ -238,8 +232,6 @@ void lv_draw_keyboard() {
   lv_kb_set_style(kb, LV_KB_STYLE_BTN_PR, &pr_style);
   #if HAS_ROTARY_ENCODER
     if (gCfgItems.encoder_enable) {
-      //lv_group_add_obj(g, kb);
-      //lv_group_set_editing(g, true);
     }
   #endif
 
@@ -260,9 +252,6 @@ void lv_draw_keyboard() {
 }
 
 void lv_clear_keyboard() {
-  #if HAS_ROTARY_ENCODER
-    if (gCfgItems.encoder_enable) { /* lv_group_remove_all_objs(g); */ }
-  #endif
   lv_obj_del(scr);
 }
 

Marlin/src/lcd/extui/lib/mks_ui/draw_language.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../inc/MarlinConfig.h"
 #include <string.h>

Marlin/src/lcd/extui/lib/mks_ui/draw_language.h

@@ -28,7 +28,6 @@
 extern void lv_draw_language(void);
 extern void lv_clear_language();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_level_settings.cpp

@@ -40,23 +40,20 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_level_settings();
   switch (obj->mks_obj_id) {
     case ID_LEVEL_RETURN:
-      lv_clear_level_settings();
       draw_return_ui();
       break;
     case ID_LEVEL_POSITION:
-      lv_clear_level_settings();
       lv_draw_manual_level_pos_settings();
       break;
     case ID_LEVEL_COMMAND:
       keyboard_value = gcodeCommand;
-      lv_clear_level_settings();
       lv_draw_keyboard();
       break;
     #if HAS_BED_PROBE
       case ID_LEVEL_ZOFFSET:
-        lv_clear_level_settings();
         lv_draw_auto_level_offset_settings();
         break;
     #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../gcode/queue.h"
 #include "../../../../inc/MarlinConfig.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_manuaLevel.h

@@ -28,7 +28,6 @@
 extern void lv_draw_manualLevel(void);
 extern void lv_clear_manualLevel();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_manual_level_pos_settings.cpp

@@ -55,68 +55,50 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
       uiCfg.para_ui_page = 0;
       lv_clear_manual_level_pos_settings();
       draw_return_ui();
-      break;
+      return;
     case ID_MANUAL_POS_X1:
       value = level_pos_x1;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_Y1:
       value = level_pos_y1;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_X2:
       value = level_pos_x2;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_Y2:
       value = level_pos_y2;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_X3:
       value = level_pos_x3;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_Y3:
       value = level_pos_y3;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_X4:
       value = level_pos_x4;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_Y4:
       value = level_pos_y4;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_X5:
       value = level_pos_y5;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_Y5:
       value = level_pos_y5;
-      lv_clear_manual_level_pos_settings();
-      lv_draw_number_key();
       break;
     case ID_MANUAL_POS_UP:
       uiCfg.para_ui_page = 0;
       lv_clear_manual_level_pos_settings();
       lv_draw_manual_level_pos_settings();
-      break;
+      return;
     case ID_MANUAL_POS_DOWN:
       uiCfg.para_ui_page = 1;
       lv_clear_manual_level_pos_settings();
       lv_draw_manual_level_pos_settings();
-      break;
+      return;
   }
+  lv_clear_manual_level_pos_settings();
+  lv_draw_number_key();
 }
 
 void lv_draw_manual_level_pos_settings(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_max_feedrate_settings.cpp

@@ -45,48 +45,38 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+
+  lv_clear_max_feedrate_settings();
   switch (obj->mks_obj_id) {
     case ID_FEED_RETURN:
       uiCfg.para_ui_page = 0;
-      lv_clear_max_feedrate_settings();
       draw_return_ui();
-      break;
+      return;
     case ID_FEED_X:
       value = XMaxFeedRate;
-      lv_clear_max_feedrate_settings();
-      lv_draw_number_key();
       break;
     case ID_FEED_Y:
       value = YMaxFeedRate;
-      lv_clear_max_feedrate_settings();
-      lv_draw_number_key();
       break;
     case ID_FEED_Z:
       value = ZMaxFeedRate;
-      lv_clear_max_feedrate_settings();
-      lv_draw_number_key();
       break;
     case ID_FEED_E0:
       value = E0MaxFeedRate;
-      lv_clear_max_feedrate_settings();
-      lv_draw_number_key();
       break;
     case ID_FEED_E1:
       value = E1MaxFeedRate;
-      lv_clear_max_feedrate_settings();
-      lv_draw_number_key();
       break;
     case ID_FEED_UP:
       uiCfg.para_ui_page = 0;
-      lv_clear_max_feedrate_settings();
       lv_draw_max_feedrate_settings();
-      break;
+      return;
     case ID_FEED_DOWN:
       uiCfg.para_ui_page = 1;
-      lv_clear_max_feedrate_settings();
       lv_draw_max_feedrate_settings();
-      break;
+      return;
   }
+  lv_draw_number_key();
 }
 
 void lv_draw_max_feedrate_settings(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_motor_settings.cpp

@@ -41,30 +41,26 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_motor_settings();
   switch (obj->mks_obj_id) {
     case ID_MOTOR_RETURN:
-      lv_clear_motor_settings();
       draw_return_ui();
       break;
     case ID_MOTOR_STEPS:
-      lv_clear_motor_settings();
       lv_draw_step_settings();
       break;
     #if USE_SENSORLESS
       case ID_HOME_SENSE:
-        lv_clear_motor_settings();
         lv_draw_homing_sensitivity_settings();
         break;
     #endif
 
     #if HAS_TRINAMIC_CONFIG
       case ID_MOTOR_TMC_CURRENT:
-        lv_clear_motor_settings();
         lv_draw_tmc_current_settings();
         break;
       #if HAS_STEALTHCHOP
         case ID_MOTOR_STEP_MODE:
-          lv_clear_motor_settings();
           lv_draw_tmc_step_mode_settings();
           break;
       #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../gcode/queue.h"
 #include "../../../../inc/MarlinConfig.h"
@@ -124,7 +120,7 @@ void lv_draw_move_motor(void) {
   lv_big_button_create(scr, "F:/bmp_zAdd.bin", move_menu.z_add, BTN_X_PIXEL * 2 + INTERVAL_V * 3, titleHeight, event_handler, ID_M_Z_P);
   lv_big_button_create(scr, "F:/bmp_zDec.bin", move_menu.z_dec, BTN_X_PIXEL * 2 + INTERVAL_V * 3, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_M_Z_N);
 
-  // button with image and label changed dinamycally by disp_move_dist
+  // button with image and label changed dynamically by disp_move_dist
   buttonV = lv_imgbtn_create(scr, nullptr, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight, event_handler, ID_M_STEP);
   labelV = lv_label_create_empty(buttonV);
   #if HAS_ROTARY_ENCODER

Marlin/src/lcd/extui/lib/mks_ui/draw_move_motor.h

@@ -29,7 +29,6 @@ extern void lv_draw_move_motor(void);
 extern void lv_clear_move_motor();
 extern void disp_move_dist();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_number_key.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../../lvgl/src/lv_objx/lv_img.h"
-//#include "../../lvgl/src/lv_core/lv_disp.h"
-//#include "../../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../gcode/gcode.h"
 #include "../../../../gcode/queue.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_operation.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../module/temperature.h"
 #include "../../../../module/motion.h"
@@ -178,7 +174,6 @@ void lv_draw_operation(void) {
   label_PowerOff = lv_label_create_empty(buttonPowerOff);
 
   if (uiCfg.print_state != WORKING) {
-    //label_Filament = lv_label_create_empty(buttonFilament);
     labelExtrusion = lv_label_create_empty(buttonExtrusion);
     label_Move = lv_label_create_empty(buttonMove);
   }
@@ -205,8 +200,6 @@ void lv_draw_operation(void) {
     lv_obj_align(label_PowerOff, buttonPowerOff, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
 
     if (uiCfg.print_state != WORKING) {
-      //lv_label_set_text(label_Filament, operation_menu.filament);
-      //lv_obj_align(label_Filament, buttonFilament, LV_ALIGN_IN_BOTTOM_MID,0, BUTTON_TEXT_Y_OFFSET);
       lv_label_set_text(labelExtrusion, operation_menu.extr);
       lv_obj_align(labelExtrusion, buttonExtrusion, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
 

Marlin/src/lcd/extui/lib/mks_ui/draw_operation.h

@@ -28,7 +28,6 @@
 extern void lv_draw_operation(void);
 extern void lv_clear_operation();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_pause_message.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../feature/pause.h"
 #include "../../../../inc/MarlinConfig.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_pause_message.h

@@ -27,7 +27,6 @@
 
 extern void lv_draw_pause_message(const PauseMessage msg);
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_pause_position.cpp

@@ -41,27 +41,22 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_pause_position();
   switch (obj->mks_obj_id) {
     case ID_PAUSE_RETURN:
-      lv_clear_pause_position();
       draw_return_ui();
-      break;
+      return;
     case ID_PAUSE_X:
       value = pause_pos_x;
-      lv_clear_pause_position();
-      lv_draw_number_key();
       break;
     case ID_PAUSE_Y:
       value = pause_pos_y;
-      lv_clear_pause_position();
-      lv_draw_number_key();
       break;
     case ID_PAUSE_Z:
       value = pause_pos_z;
-      lv_clear_pause_position();
-      lv_draw_number_key();
       break;
   }
+  lv_draw_number_key();
 }
 
 void lv_draw_pause_position(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../module/temperature.h"
 #include "../../../../inc/MarlinConfig.h"

Marlin/src/lcd/extui/lib/mks_ui/draw_preHeat.h

@@ -31,7 +31,6 @@ extern void disp_temp_type();
 extern void disp_step_heat();
 extern void disp_desire_temp();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.cpp

@@ -49,7 +49,7 @@ int8_t curDirLever = 0;
 LIST_FILE list_file;
 DIR_OFFSET dir_offset[10];
 
-extern uint8_t public_buf[512];
+extern uint8_t public_buf[513];
 extern char public_buf_m[100];
 
 uint8_t sel_id = 0;

Marlin/src/lcd/extui/lib/mks_ui/draw_print_file.h

@@ -33,16 +33,15 @@ typedef struct {
 extern DIR_OFFSET dir_offset[10];
 
 #define FILE_NUM 6
-#define SHORT_NEME_LEN 13
+#define SHORT_NAME_LEN 13
 #define NAME_CUT_LEN 23
 
 #define MAX_DIR_LEVEL  10
 
 typedef struct {
-  //char longName[FILE_NUM][LONG_FILENAME_LENGTH];
-  char file_name[FILE_NUM][SHORT_NEME_LEN * MAX_DIR_LEVEL + 1];
-  char curDirPath[SHORT_NEME_LEN * MAX_DIR_LEVEL + 1];
-  char long_name[FILE_NUM][SHORT_NEME_LEN * 2 + 1];
+  char file_name[FILE_NUM][SHORT_NAME_LEN * MAX_DIR_LEVEL + 1];
+  char curDirPath[SHORT_NAME_LEN * MAX_DIR_LEVEL + 1];
+  char long_name[FILE_NUM][SHORT_NAME_LEN * 2 + 1];
   bool IsFolder[FILE_NUM];
   char Sd_file_cnt;
   char sd_file_index;
@@ -60,7 +59,6 @@ extern int ascii2dec_test(char *ascii);
 extern void lv_clear_print_file();
 extern void lv_gcode_file_seek(uint32_t pos);
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../MarlinCore.h" // for marlin_state
 #include "../../../../module/temperature.h"
@@ -75,10 +71,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
   switch (obj->mks_obj_id) {
     case ID_PAUSE:
       if (uiCfg.print_state == WORKING) {
-        // #if ENABLED(PARK_HEAD_ON_PAUSE)
-        // queue.inject_P(PSTR("M25 P\nM24"));
         #if ENABLED(SDSUPPORT)
-          // queue.inject_P(PSTR("M25\nG91\nG1 Z10\nG90"));
           card.pauseSDPrint();
           stop_print_time();
           uiCfg.print_state = PAUSING;
@@ -99,7 +92,6 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
           lv_imgbtn_set_src_both(obj, "F:/bmp_pause.bin");
           lv_label_set_text(labelPause, printing_menu.pause);
           lv_obj_align(labelPause, buttonPause, LV_ALIGN_CENTER, 30, 0);
-          // recovery.resume();
           print_time.minutes = recovery.info.print_job_elapsed / 60;
           print_time.seconds = recovery.info.print_job_elapsed % 60;
           print_time.hours   = print_time.minutes / 60;
@@ -164,20 +156,6 @@ void lv_draw_printing(void) {
     }
   #endif
 
-  // Create labels on the image buttons
-  //lv_btn_set_layout(buttonExt1, LV_LAYOUT_OFF);
-  //#if HAS_MULTI_EXTRUDER
-  //  lv_btn_set_layout(buttonExt2, LV_LAYOUT_OFF);
-  //#endif
-
-  //#if HAS_HEATED_BED
-  //  lv_btn_set_layout(buttonBedstate, LV_LAYOUT_OFF);
-  //#endif
-
-  //lv_btn_set_layout(buttonFanstate, LV_LAYOUT_OFF);
-  //lv_btn_set_layout(buttonTime, LV_LAYOUT_OFF);
-  //lv_btn_set_layout(buttonZpos, LV_LAYOUT_OFF);
-
   labelExt1 = lv_label_create(scr, 250, 146, nullptr);
 
   #if HAS_MULTI_EXTRUDER
@@ -262,12 +240,10 @@ void disp_fan_Zpos() {
 }
 
 void reset_print_time() {
-  // print_time.days = 0;
   print_time.hours   = 0;
   print_time.minutes = 0;
   print_time.seconds = 0;
   print_time.ms_10   = 0;
-  // print_time.start = 1;
 }
 
 void start_print_time() { print_time.start = 1; }
@@ -290,7 +266,6 @@ void setProBarRate() {
     #endif
     rate = (rate_tmp_r - (PREVIEW_SIZE + To_pre_view)) * 100 / (gCfgItems.curFilesize - (PREVIEW_SIZE + To_pre_view));
   }
-  // gCurFileState.totalSend = rate;
 
   if (rate <= 0) return;
 

Marlin/src/lcd/extui/lib/mks_ui/draw_printing.h

@@ -48,7 +48,6 @@ extern void start_print_time();
 extern void stop_print_time();
 extern void setProBarRate();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.cpp

@@ -26,10 +26,6 @@
 #include "draw_ready_print.h"
 #include "draw_tool.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 #include "tft_lvgl_configuration.h"
 #include "mks_hardware_test.h"
 #include "draw_ui.h"
@@ -46,7 +42,6 @@
 
 #include <stdio.h>
 
-//static lv_obj_t *buttonPrint, *buttonTool, *buttonSet;
 extern lv_group_t*  g;
 static lv_obj_t *scr;
 #if ENABLED(MKS_TEST)
@@ -61,17 +56,16 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_ready_print();
+
   switch (obj->mks_obj_id) {
     case ID_TOOL:
-      lv_clear_ready_print();
       lv_draw_tool();
       break;
     case ID_SET:
-      lv_clear_ready_print();
       lv_draw_set();
       break;
     case ID_PRINT:
-      lv_clear_ready_print();
       lv_draw_print_file();
       break;
   }
@@ -104,17 +98,12 @@ void disp_det_error() {
 lv_obj_t *e1, *e2, *e3, *bed;
 void mks_disp_test() {
   char buf[30] = {0};
-  //lv_obj_t *label_tool2 = lv_label_create_empty(scr);
-  //lv_obj_set_pos(label_tool, 20, 50);
   sprintf_P(buf, PSTR("e1:%d"), (int)thermalManager.temp_hotend[0].celsius);
   lv_label_set_text(e1, buf);
   #if HAS_MULTI_HOTEND
     sprintf_P(buf, PSTR("e2:%d"), (int)thermalManager.temp_hotend[1].celsius);
     lv_label_set_text(e2, buf);
   #endif
-
-  //sprintf_P(buf, PSTR("e3:%d"), (int)thermalManager.temp_hotend[2].celsius);
-  //lv_label_set_text(e3, buf);
   #if HAS_HEATED_BED
     sprintf_P(buf, PSTR("bed:%d"), (int)thermalManager.temp_bed.celsius);
     lv_label_set_text(bed, buf);
@@ -128,41 +117,15 @@ void lv_draw_ready_print(void) {
   disp_state_stack._disp_index = 0;
   ZERO(disp_state_stack._disp_state);
   scr = lv_screen_create(PRINT_READY_UI, "");
-  //lv_obj_set_hidden(scr, true);
 
   if (mks_test_flag == 0x1E) {
-    //(void)lv_label_create(scr, TITLE_XPOS, TITLE_YPOS, creat_title_text());
-
     // Create image buttons
-    //buttonPrint = lv_imgbtn_create(scr, nullptr);
     buttonTool = lv_imgbtn_create(scr, "F:/bmp_tool.bin", event_handler, ID_TOOL);
 
     lv_obj_set_pos(buttonTool, 360, 180);
 
-    //buttonSet = lv_imgbtn_create(scr, nullptr);
-    //lv_obj_set_pos(buttonSet, 180, 90);
-    //lv_obj_set_pos(buttonPrint, 340, 90);
-
-    //lv_obj_set_pos(buttonTool, SIMPLE_FIRST_PAGE_GRAP+1, (TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
-    //lv_obj_set_pos(buttonSet, BTN_X_PIXEL+SIMPLE_FIRST_PAGE_GRAP*2+1, (TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
-    //lv_obj_set_pos(buttonPrint, BTN_X_PIXEL*2+SIMPLE_FIRST_PAGE_GRAP*3+1, (TFT_HEIGHT-BTN_Y_PIXEL)/2+2);
-
-    // Create labels on the image buttons
-    //lv_btn_set_layout(buttonPrint, LV_LAYOUT_OFF);
-    //lv_btn_set_layout(buttonSet, LV_LAYOUT_OFF);
-
-    //lv_obj_t *label_print = lv_label_create_empty(buttonPrint);
-    //lv_obj_t *label_set = lv_label_create_empty(buttonSet);
     lv_obj_t *label_tool = lv_label_create_empty(buttonTool);
     if (gCfgItems.multiple_language) {
-      //lv_label_set_text(label_print, main_menu.print);
-      //lv_obj_align(label_print, buttonPrint, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
-
-      //lv_label_set_text(label_set, main_menu.set);
-      //lv_obj_align(label_set, buttonSet, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
-
-      //lv_label_set_style(label_tool, LV_BTN_STATE_PR, &tft_style_label_pre);
-      //lv_label_set_style(label_tool, LV_BTN_STATE_REL, &tft_style_label_rel);
       lv_label_set_text(label_tool, main_menu.tool);
       lv_obj_align(label_tool, buttonTool, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
     }
@@ -179,11 +142,6 @@ void lv_draw_ready_print(void) {
         lv_label_set_text(e2, buf);
       #endif
 
-      //e3 = lv_label_create_empty(scr);
-      //lv_obj_set_pos(e3, 20, 70);
-      //sprintf_P(buf, PSTR("e1:  %d"), (int)thermalManager.temp_hotend[2].celsius);
-      //lv_label_set_text(e3, buf);
-
       #if HAS_HEATED_BED
         bed = lv_label_create_empty(scr);
         lv_obj_set_pos(bed, 20, 95);

Marlin/src/lcd/extui/lib/mks_ui/draw_ready_print.h

@@ -33,7 +33,6 @@ extern void disp_det_error();
 extern void disp_det_ok();
 extern void lv_clear_ready_print();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_set.cpp

@@ -27,10 +27,6 @@
 #include "draw_set.h"
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "pic_manager.h"
 
@@ -58,36 +54,29 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
-  #if ENABLED(MKS_WIFI_MODULE)
-    char buf[6] = { 0 };
-  #endif
+  if (obj->mks_obj_id == ID_S_CONTINUE) return;
+  if (obj->mks_obj_id == ID_S_MOTOR_OFF) {
+    TERN(HAS_SUICIDE, suicide(), queue.enqueue_now_P(PSTR("M84")));
+    return;
+  }
+  lv_clear_set();
   switch (obj->mks_obj_id) {
     case ID_S_FAN:
-      lv_clear_set();
       lv_draw_fan();
       break;
     case ID_S_ABOUT:
-      lv_clear_set();
       lv_draw_about();
       break;
-    case ID_S_CONTINUE: break;
-    case ID_S_MOTOR_OFF:
-      TERN(HAS_SUICIDE, suicide(), queue.enqueue_now_P(PSTR("M84")));
-      break;
     case ID_S_LANGUAGE:
-      lv_clear_set();
       lv_draw_language();
       break;
     case ID_S_MACHINE_PARA:
-      lv_clear_set();
       lv_draw_machine_para();
       break;
     case ID_S_EEPROM_SET:
-      lv_clear_set();
       lv_draw_eeprom_settings();
       break;
     case ID_S_RETURN:
-      lv_clear_set();
       lv_draw_ready_print();
       break;
 
@@ -96,32 +85,23 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
         if (gCfgItems.wifi_mode_sel == STA_MODEL) {
           if (wifi_link_state == WIFI_CONNECTED) {
             last_disp_state = SET_UI;
-            lv_clear_set();
             lv_draw_wifi();
           }
           else {
             if (uiCfg.command_send == 1) {
-              buf[0] = 0xA5;
-              buf[1] = 0x07;
-              buf[2] = 0x00;
-              buf[3] = 0x00;
-              buf[4] = 0xFC;
-              raw_send_to_wifi(buf, 5);
-
+              uint8_t cmd_wifi_list[] = { 0xA5, 0x07, 0x00, 0x00, 0xFC };
+              raw_send_to_wifi(cmd_wifi_list, COUNT(cmd_wifi_list));
               last_disp_state = SET_UI;
-              lv_clear_set();
               lv_draw_wifi_list();
             }
             else {
               last_disp_state = SET_UI;
-              lv_clear_set();
               lv_draw_dialog(DIALOG_WIFI_ENABLE_TIPS);
             }
           }
         }
         else {
           last_disp_state = SET_UI;
-          lv_clear_set();
           lv_draw_wifi();
         }
         break;

Marlin/src/lcd/extui/lib/mks_ui/draw_set.h

@@ -28,7 +28,6 @@
 extern void lv_draw_set(void);
 extern void lv_clear_set();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_step_settings.cpp

@@ -45,48 +45,37 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_step_settings();
   switch (obj->mks_obj_id) {
     case ID_STEP_RETURN:
       uiCfg.para_ui_page = 0;
-      lv_clear_step_settings();
       draw_return_ui();
-      break;
+      return;
     case ID_STEP_X:
       value = Xstep;
-      lv_clear_step_settings();
-      lv_draw_number_key();
       break;
     case ID_STEP_Y:
       value = Ystep;
-      lv_clear_step_settings();
-      lv_draw_number_key();
       break;
     case ID_STEP_Z:
       value = Zstep;
-      lv_clear_step_settings();
-      lv_draw_number_key();
       break;
     case ID_STEP_E0:
       value = E0step;
-      lv_clear_step_settings();
-      lv_draw_number_key();
       break;
     case ID_STEP_E1:
       value = E1step;
-      lv_clear_step_settings();
-      lv_draw_number_key();
       break;
     case ID_STEP_UP:
       uiCfg.para_ui_page = 0;
-      lv_clear_step_settings();
       lv_draw_step_settings();
-      break;
+      return;
     case ID_STEP_DOWN:
       uiCfg.para_ui_page = 1;
-      lv_clear_step_settings();
       lv_draw_step_settings();
-      break;
+      return;
   }
+  lv_draw_number_key();
 }
 
 void lv_draw_step_settings(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_tmc_current_settings.cpp

@@ -46,60 +46,49 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  lv_clear_tmc_current_settings();
   switch (obj->mks_obj_id) {
     case ID_TMC_CURRENT_RETURN:
       uiCfg.para_ui_page = 0;
-      lv_clear_tmc_current_settings();
       draw_return_ui();
-      break;
-
+      return;
     #if AXIS_IS_TMC(X)
       case ID_TMC_CURRENT_X:
         value = Xcurrent;
-        lv_clear_tmc_current_settings();
-        lv_draw_number_key();
         break;
     #endif
     #if AXIS_IS_TMC(Y)
       case ID_TMC_CURRENT_Y:
         value = Ycurrent;
-        lv_clear_tmc_current_settings();
-        lv_draw_number_key();
         break;
     #endif
     #if AXIS_IS_TMC(Z)
       case ID_TMC_CURRENT_Z:
         value = Zcurrent;
-        lv_clear_tmc_current_settings();
-        lv_draw_number_key();
         break;
     #endif
     #if AXIS_IS_TMC(E0)
       case ID_TMC_CURRENT_E0:
         value = E0current;
-        lv_clear_tmc_current_settings();
-        lv_draw_number_key();
         break;
     #endif
     #if AXIS_IS_TMC(E1)
       case ID_TMC_CURRENT_E1:
         value = E1current;
-        lv_clear_tmc_current_settings();
-        lv_draw_number_key();
         break;
     #endif
 
     case ID_TMC_CURRENT_UP:
       uiCfg.para_ui_page = 0;
-      lv_clear_tmc_current_settings();
       lv_draw_tmc_current_settings();
-      break;
+      return;
     case ID_TMC_CURRENT_DOWN:
       uiCfg.para_ui_page = 1;
-      lv_clear_tmc_current_settings();
       lv_draw_tmc_current_settings();
-      break;
+      return;
   }
+  lv_draw_number_key();
+
 }
 
 void lv_draw_tmc_current_settings(void) {

Marlin/src/lcd/extui/lib/mks_ui/draw_tmc_step_mode_settings.cpp

@@ -50,9 +50,7 @@ enum {
 
 static lv_obj_t *buttonXState = nullptr, *buttonYState = nullptr, *buttonZState = nullptr, *buttonE0State = nullptr;
 
-//#if AXIS_HAS_STEALTHCHOP(E1)
-  static lv_obj_t *buttonE1State = nullptr;
-//#endif
+static lv_obj_t *buttonE1State = nullptr;
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;

Marlin/src/lcd/extui/lib/mks_ui/draw_tool.cpp

@@ -25,10 +25,6 @@
 
 #include "draw_ui.h"
 #include <lv_conf.h>
-//#include "../lvgl/src/lv_objx/lv_imgbtn.h"
-//#include "../lvgl/src/lv_objx/lv_img.h"
-//#include "../lvgl/src/lv_core/lv_disp.h"
-//#include "../lvgl/src/lv_core/lv_refr.h"
 
 #include "../../../../gcode/queue.h"
 #include "../../../../module/temperature.h"
@@ -54,45 +50,42 @@ enum {
 
 static void event_handler(lv_obj_t *obj, lv_event_t event) {
   if (event != LV_EVENT_RELEASED) return;
+  #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+    bool clear = (obj->mks_obj_id != ID_T_LEVELING);
+  #else
+    constexpr bool clear = true;
+  #endif
+  if (clear) lv_clear_tool();
   switch (obj->mks_obj_id) {
     case ID_T_PRE_HEAT:
-      lv_clear_tool();
       lv_draw_preHeat();
       break;
     case ID_T_EXTRUCT:
-      lv_clear_tool();
       lv_draw_extrusion();
       break;
     case ID_T_MOV:
-      lv_clear_tool();
       lv_draw_move_motor();
       break;
     case ID_T_HOME:
-      lv_clear_tool();
       lv_draw_home();
       break;
     case ID_T_LEVELING:
       #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
-        //queue.enqueue_one_P(PSTR("G28"));
-        //queue.enqueue_one_P(PSTR("G29"));
         get_gcode_command(AUTO_LEVELING_COMMAND_ADDR,(uint8_t *)public_buf_m);
         public_buf_m[sizeof(public_buf_m)-1] = 0;
         queue.inject_P(PSTR(public_buf_m));
       #else
         uiCfg.leveling_first_time = 1;
-        lv_clear_tool();
         lv_draw_manualLevel();
       #endif
       break;
     case ID_T_FILAMENT:
       uiCfg.desireSprayerTempBak = thermalManager.temp_hotend[uiCfg.curSprayerChoose].target;
-      lv_clear_tool();
       lv_draw_filament_change();
       break;
     case ID_T_MORE: break;
     case ID_T_RETURN:
       TERN_(MKS_TEST, curent_disp_ui = 1);
-      lv_clear_tool();
       lv_draw_ready_print();
       break;
   }

Marlin/src/lcd/extui/lib/mks_ui/draw_tool.h

@@ -28,7 +28,6 @@
 extern void lv_draw_tool(void);
 extern void lv_clear_tool();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_touch_calibration.h

@@ -29,7 +29,6 @@ extern void lv_draw_touch_calibration_screen();
 extern void lv_clear_touch_calibration_screen();
 extern void lv_update_touch_calibration_screen();
 
-//extern void disp_temp_ready_print();
 #ifdef __cplusplus
   } /* C-declarations for C++ */
 #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_ui.cpp

@@ -70,10 +70,11 @@ uint8_t printing_rate_update_flag;
 
 extern bool once_flag;
 extern uint8_t sel_id;
-extern uint8_t public_buf[512];
-extern uint8_t bmp_public_buf[17 * 1024];
 extern lv_group_t *g;
 
+extern uint8_t bmp_public_buf[14 * 1024];
+extern uint8_t public_buf[513];
+
 extern void LCD_IO_WriteData(uint16_t RegValue);
 
 static const char custom_gcode_command[][100] = {
@@ -568,11 +569,7 @@ char *creat_title_text() {
 
   ZERO(tmpCurFileStr);
 
-  #if _LFN_UNICODE
-    //cutFileName((TCHAR *)curFileName, 16, 16, (TCHAR *)tmpCurFileStr);
-  #else
-    cutFileName(list_file.long_name[sel_id], 16, 16, tmpCurFileStr);
-  #endif
+  cutFileName(list_file.long_name[sel_id], 16, 16, tmpCurFileStr);
 
   ZERO(public_buf_m);
 
@@ -589,10 +586,7 @@ char *creat_title_text() {
     index++;
   }
 
-  if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI
-    /*|| disp_state_stack._disp_state[disp_state_stack._disp_index] == OPERATE_UI
-    || disp_state_stack._disp_state[disp_state_stack._disp_index] == PAUSE_UI*/
-  ) {
+  if (disp_state_stack._disp_state[disp_state_stack._disp_index] == PRINTING_UI) {
     titleText_cat(public_buf_m, sizeof(public_buf_m), (char *)":");
     titleText_cat(public_buf_m, sizeof(public_buf_m), tmpCurFileStr);
   }
@@ -617,8 +611,6 @@ char *creat_title_text() {
 
   void preview_gcode_prehandle(char *path) {
     #if ENABLED(SDSUPPORT)
-      //uint8_t re;
-      //uint32_t read;
       uint32_t pre_read_cnt = 0;
       uint32_t *p1;
       char *cur_name;
@@ -957,7 +949,6 @@ void GUI_RefreshPage() {
 
   switch (disp_state) {
     case MAIN_UI:
-      //lv_draw_ready_print();
       break;
     case EXTRUSION_UI:
       if (temps_update_flag) {
@@ -972,14 +963,6 @@ void GUI_RefreshPage() {
       }
       break;
     case PRINT_READY_UI:
-      /*
-      if (gCfgItems.display_style == 2) {
-        if (temps_update_flag) {
-          temps_update_flag = false;
-          disp_restro_state();
-        }
-      }
-      */
       break;
 
     case PRINT_FILE_UI: break;
@@ -1000,23 +983,9 @@ void GUI_RefreshPage() {
       break;
 
     case OPERATE_UI:
-      /*
-      if (temps_update_flag) {
-        temps_update_flag = false;
-        disp_temp_operate();
-      }
-
-      setProBarRateOpera();
-      */
       break;
 
     case PAUSE_UI:
-      /*
-      if (temps_update_flag) {
-        temps_update_flag = false;
-        disp_temp_pause();
-      }
-      */
       break;
 
     case FAN_UI:
@@ -1027,17 +996,6 @@ void GUI_RefreshPage() {
       break;
 
     case MOVE_MOTOR_UI:
-      /*
-      if (mksReprint.mks_printer_state == MKS_IDLE) {
-        if (z_high_count == 1 && temper_error_flg != 1) {
-          z_high_count = 0;
-          memset((char *)gCfgItems.move_z_coordinate, ' ', sizeof(gCfgItems.move_z_coordinate));
-          GUI_DispStringAt((const char *)gCfgItems.move_z_coordinate, 380, TITLE_YPOS);
-          sprintf_P((char *)gCfgItems.move_z_coordinate, PSTR("Z: %.3f"), current_position[Z_AXIS]);
-          GUI_DispStringAt((const char *)gCfgItems.move_z_coordinate, 380, TITLE_YPOS);
-        }
-      }
-      */
       break;
 
     #if ENABLED(MKS_WIFI_MODULE)
@@ -1064,7 +1022,6 @@ void GUI_RefreshPage() {
       TERN_(MKS_WIFI_MODULE, wifi_scan_handle());
       break;
     case MESHLEVELING_UI:
-      /*disp_zpos();*/
       break;
     case HARDWARE_TEST_UI:
       break;
@@ -1077,8 +1034,6 @@ void GUI_RefreshPage() {
       #endif
       break;
     case KEY_BOARD_UI:
-      /*update_password_disp();
-      update_join_state_disp();*/
       break;
     #if ENABLED(MKS_WIFI_MODULE)
       case WIFI_TIPS_UI:
@@ -1142,33 +1097,33 @@ void clear_cur_ui() {
   last_disp_state = disp_state_stack._disp_state[disp_state_stack._disp_index];
 
   switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
-    case PRINT_READY_UI:              //Get_Temperature_Flg = 0;
+    case PRINT_READY_UI:
                                       lv_clear_ready_print(); break;
     case PRINT_FILE_UI:               lv_clear_print_file(); break;
     case PRINTING_UI:                 lv_clear_printing(); break;
     case MOVE_MOTOR_UI:               lv_clear_move_motor(); break;
     case OPERATE_UI:                  lv_clear_operation(); break;
-    case PAUSE_UI:                    /* Clear_pause(); */ break;
+    case PAUSE_UI:                    break;
     case EXTRUSION_UI:                lv_clear_extrusion(); break;
     case PRE_HEAT_UI:                 lv_clear_preHeat(); break;
     case CHANGE_SPEED_UI:             lv_clear_change_speed(); break;
     case FAN_UI:                      lv_clear_fan(); break;
     case SET_UI:                      lv_clear_set(); break;
     case ZERO_UI:                     lv_clear_home(); break;
-    case SPRAYER_UI:                  /* Clear_Sprayer(); */ break;
-    case MACHINE_UI:                  /* Clear_Machine(); */ break;
+    case SPRAYER_UI:                  break;
+    case MACHINE_UI:                  break;
     case LANGUAGE_UI:                 lv_clear_language(); break;
     case ABOUT_UI:                    lv_clear_about(); break;
-    case LOG_UI:                      /* Clear_Connect(); */ break;
-    case DISK_UI:                     /* Clear_Disk(); */ break;
+    case LOG_UI:                      break;
+    case DISK_UI:                     break;
     #if ENABLED(MKS_WIFI_MODULE)
       case WIFI_UI:                   lv_clear_wifi(); break;
     #endif
     case MORE_UI:                     /* Clear_more(); */ break;
-    case FILETRANSFER_UI:             /* Clear_fileTransfer(); */ break;
+    case FILETRANSFER_UI:             break;
     case DIALOG_UI:                   lv_clear_dialog(); break;
-    case FILETRANSFERSTATE_UI:        /* Clear_WifiFileTransferdialog(); */ break;
-    case PRINT_MORE_UI:               /* Clear_Printmore(); */ break;
+    case FILETRANSFERSTATE_UI:        break;
+    case PRINT_MORE_UI:               break;
     case FILAMENTCHANGE_UI:           lv_clear_filament_change(); break;
     case LEVELING_UI:                 lv_clear_manualLevel(); break;
     case BIND_UI:                     /* Clear_Bind(); */ break;
@@ -1176,8 +1131,8 @@ void clear_cur_ui() {
       case NOZZLE_PROBE_OFFSET_UI:    lv_clear_auto_level_offset_settings(); break;
     #endif
     case TOOL_UI:                     lv_clear_tool(); break;
-    case MESHLEVELING_UI:             /* Clear_MeshLeveling(); */ break;
-    case HARDWARE_TEST_UI:            /* Clear_Hardwaretest(); */ break;
+    case MESHLEVELING_UI:             break;
+    case HARDWARE_TEST_UI:            break;
     #if ENABLED(MKS_WIFI_MODULE)
       case WIFI_LIST_UI:              lv_clear_wifi_list(); break;
     #endif
@@ -1187,28 +1142,28 @@ void clear_cur_ui() {
     #endif
     case MACHINE_PARA_UI:             lv_clear_machine_para(); break;
     case MACHINE_SETTINGS_UI:         lv_clear_machine_settings(); break;
-    case TEMPERATURE_SETTINGS_UI:     /* Clear_TemperatureSettings(); */ break;
+    case TEMPERATURE_SETTINGS_UI:     break;
     case MOTOR_SETTINGS_UI:           lv_clear_motor_settings(); break;
-    case MACHINETYPE_UI:              /* Clear_MachineType(); */ break;
-    case STROKE_UI:                   /* Clear_Stroke(); */ break;
-    case HOME_DIR_UI:                 /* Clear_HomeDir(); */ break;
-    case ENDSTOP_TYPE_UI:             /* Clear_EndstopType(); */ break;
-    case FILAMENT_SETTINGS_UI:        lv_clear_filament_settings(); break;
-    case LEVELING_SETTIGNS_UI:        /* Clear_LevelingSettings(); */ break;
+    case MACHINETYPE_UI:              break;
+    case STROKE_UI:                   break;
+    case HOME_DIR_UI:                 break;
+    case ENDSTOP_TYPE_UI:             break;
+    case FILAMENT_SETTINGS_UI:        break;
+    case LEVELING_SETTIGNS_UI:        break;
     case LEVELING_PARA_UI:            lv_clear_level_settings(); break;
-    case DELTA_LEVELING_PARA_UI:      /* Clear_DeltaLevelPara(); */ break;
+    case DELTA_LEVELING_PARA_UI:      break;
     case MANUAL_LEVELING_POSIGION_UI: lv_clear_manual_level_pos_settings(); break;
     case MAXFEEDRATE_UI:              lv_clear_max_feedrate_settings(); break;
     case STEPS_UI:                    lv_clear_step_settings(); break;
     case ACCELERATION_UI:             lv_clear_acceleration_settings(); break;
     case JERK_UI:                     TERN_(HAS_CLASSIC_JERK, lv_clear_jerk_settings()); break;
-    case MOTORDIR_UI:                 /* Clear_MotorDir(); */ break;
-    case HOMESPEED_UI:                /* Clear_HomeSpeed(); */ break;
-    case NOZZLE_CONFIG_UI:            /* Clear_NozzleConfig(); */ break;
-    case HOTBED_CONFIG_UI:            /* Clear_HotbedConfig(); */ break;
+    case MOTORDIR_UI:                 break;
+    case HOMESPEED_UI:                break;
+    case NOZZLE_CONFIG_UI:            break;
+    case HOTBED_CONFIG_UI:            break;
     case ADVANCED_UI:                 lv_clear_advance_settings(); break;
-    case DOUBLE_Z_UI:                 /* Clear_DoubleZ(); */ break;
-    case ENABLE_INVERT_UI:            /* Clear_EnableInvert(); */ break;
+    case DOUBLE_Z_UI:                 break;
+    case ENABLE_INVERT_UI:            break;
     case NUMBER_KEY_UI:               lv_clear_number_key(); break;
     case BABY_STEP_UI:                lv_clear_baby_stepping(); break;
     case PAUSE_POS_UI:                lv_clear_pause_position(); break;
@@ -1233,7 +1188,6 @@ void clear_cur_ui() {
     #endif
     default: break;
   }
-  //GUI_Clear();
 }
 
 void draw_return_ui() {
@@ -1253,25 +1207,25 @@ void draw_return_ui() {
 
       case MOVE_MOTOR_UI:               lv_draw_move_motor(); break;
       case OPERATE_UI:                  lv_draw_operation(); break;
-      case PAUSE_UI:                    /* draw_pause(); */ break;
+      case PAUSE_UI:                    break;
       case EXTRUSION_UI:                lv_draw_extrusion(); break;
       case PRE_HEAT_UI:                 lv_draw_preHeat(); break;
       case CHANGE_SPEED_UI:             lv_draw_change_speed(); break;
       case FAN_UI:                      lv_draw_fan(); break;
       case SET_UI:                      lv_draw_set(); break;
       case ZERO_UI:                     lv_draw_home(); break;
-      case SPRAYER_UI:                  /* draw_Sprayer(); */ break;
-      case MACHINE_UI:                  /* draw_Machine(); */ break;
+      case SPRAYER_UI:                  break;
+      case MACHINE_UI:                  break;
       case LANGUAGE_UI:                 lv_draw_language(); break;
       case ABOUT_UI:                    lv_draw_about(); break;
 
-      case CALIBRATE_UI:                /* draw_calibrate(); */ break;
-      case DISK_UI:                     /* draw_Disk(); */ break;
+      case CALIBRATE_UI:                break;
+      case DISK_UI:                     break;
       #if ENABLED(MKS_WIFI_MODULE)
         case WIFI_UI:                   lv_draw_wifi(); break;
       #endif
-      case MORE_UI:                     /* draw_More(); */ break;
       case PRINT_MORE_UI:               /* draw_printmore(); */ break;
+      case MORE_UI:                     break;
       case FILAMENTCHANGE_UI:           lv_draw_filament_change(); break;
       case LEVELING_UI:                 lv_draw_manualLevel(); break;
       case BIND_UI:                     /* draw_bind(); */ break;
@@ -1279,8 +1233,8 @@ void draw_return_ui() {
         case NOZZLE_PROBE_OFFSET_UI:    lv_draw_auto_level_offset_settings(); break;
       #endif
       case TOOL_UI:                     lv_draw_tool(); break;
-      case MESHLEVELING_UI:             /* draw_meshleveling(); */ break;
-      case HARDWARE_TEST_UI:            /* draw_Hardwaretest(); */ break;
+      case MESHLEVELING_UI:             break;
+      case HARDWARE_TEST_UI:            break;
       #if ENABLED(MKS_WIFI_MODULE)
         case WIFI_LIST_UI:              lv_draw_wifi_list(); break;
       #endif
@@ -1290,16 +1244,16 @@ void draw_return_ui() {
       #endif
       case MACHINE_PARA_UI:             lv_draw_machine_para(); break;
       case MACHINE_SETTINGS_UI:         lv_draw_machine_settings(); break;
-      case TEMPERATURE_SETTINGS_UI:     /* draw_TemperatureSettings(); */ break;
+      case TEMPERATURE_SETTINGS_UI:     break;
       case MOTOR_SETTINGS_UI:           lv_draw_motor_settings(); break;
-      case MACHINETYPE_UI:              /* draw_MachineType(); */ break;
-      case STROKE_UI:                   /* draw_Stroke(); */ break;
-      case HOME_DIR_UI:                 /* draw_HomeDir(); */ break;
-      case ENDSTOP_TYPE_UI:             /* draw_EndstopType(); */ break;
+      case MACHINETYPE_UI:              break;
+      case STROKE_UI:                   break;
+      case HOME_DIR_UI:                 break;
+      case ENDSTOP_TYPE_UI:             break;
       case FILAMENT_SETTINGS_UI:        lv_draw_filament_settings(); break;
-      case LEVELING_SETTIGNS_UI:        /* draw_LevelingSettings(); */ break;
+      case LEVELING_SETTIGNS_UI:        break;
       case LEVELING_PARA_UI:            lv_draw_level_settings(); break;
-      case DELTA_LEVELING_PARA_UI:      /* draw_DeltaLevelPara(); */ break;
+      case DELTA_LEVELING_PARA_UI:      break;
       case MANUAL_LEVELING_POSIGION_UI: lv_draw_manual_level_pos_settings(); break;
       case MAXFEEDRATE_UI:              lv_draw_max_feedrate_settings(); break;
       case STEPS_UI:                    lv_draw_step_settings(); break;
@@ -1307,15 +1261,15 @@ void draw_return_ui() {
       #if HAS_CLASSIC_JERK
         case JERK_UI:                   lv_draw_jerk_settings(); break;
       #endif
-      case MOTORDIR_UI:                 /* draw_MotorDir(); */ break;
-      case HOMESPEED_UI:                /* draw_HomeSpeed(); */ break;
-      case NOZZLE_CONFIG_UI:            /* draw_NozzleConfig(); */ break;
-      case HOTBED_CONFIG_UI:            /* draw_HotbedConfig(); */ break;
+      case MOTORDIR_UI:                 break;
+      case HOMESPEED_UI:                break;
+      case NOZZLE_CONFIG_UI:            break;
+      case HOTBED_CONFIG_UI:            break;
       case ADVANCED_UI:                 lv_draw_advance_settings(); break;
-      case DOUBLE_Z_UI:                 /* draw_DoubleZ(); */ break;
-      case ENABLE_INVERT_UI:            /* draw_EnableInvert(); */ break;
+      case DOUBLE_Z_UI:                 break;
+      case ENABLE_INVERT_UI:            break;
       case NUMBER_KEY_UI:               lv_draw_number_key(); break;
-      case DIALOG_UI:                   /* draw_dialog(uiCfg.dialogType); */ break;
+      case DIALOG_UI:                   break;
       case BABY_STEP_UI:                lv_draw_baby_stepping(); break;
       case PAUSE_POS_UI:                lv_draw_pause_position(); break;
       #if HAS_TRINAMIC_CONFIG
@@ -1612,7 +1566,6 @@ void print_time_count() {
 }
 
 void LV_TASK_HANDLER() {
-  //lv_tick_inc(1);
   lv_task_handler();
   if (mks_test_flag == 0x1E) mks_hardware_test();
 
@@ -1622,8 +1575,6 @@ void LV_TASK_HANDLER() {
 
   TERN_(MKS_WIFI_MODULE, get_wifi_commands());
 
-  //sd_detection();
-
   #if HAS_ROTARY_ENCODER
     if (gCfgItems.encoder_enable) lv_update_encoder();
   #endif

Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h

@@ -28,7 +28,7 @@
 
 // the colors of the last MKS Ui
 #undef LV_COLOR_BACKGROUND
-#define LV_COLOR_BACKGROUND LV_COLOR_MAKE(0x1A, 0x1A, 0x1A) // LV_COLOR_MAKE(0x00, 0x00, 0x00)
+#define LV_COLOR_BACKGROUND LV_COLOR_MAKE(0x1A, 0x1A, 0x1A)
 
 #define TFT_LV_PARA_BACK_BODY_COLOR  LV_COLOR_MAKE(0x4A, 0x52, 0xFF)
 

Marlin/src/lcd/extui/lib/mks_ui/draw_wifi.cpp

@@ -153,9 +153,8 @@ void disp_wifi_state() {
 }
 
 void lv_clear_wifi() {
-  #if HAS_ROTARY_ENCODER
-    if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
-  #endif
+  if (TERN0(HAS_ROTARY_ENCODER, gCfgItems.encoder_enable))
+    lv_group_remove_all_objs(g);
   lv_obj_del(scr);
 }
 

Marlin/src/lcd/extui/lib/mks_ui/draw_wifi_list.cpp

@@ -122,6 +122,9 @@ void lv_draw_wifi_list(void) {
       lv_group_add_obj(g, buttonDown);
       lv_group_add_obj(g, buttonBack);
     }
+  #else
+    UNUSED(buttonDown);
+    UNUSED(buttonBack);
   #endif
 
   disp_wifi_list();

Marlin/src/lcd/extui/lib/mks_ui/gb2312_puhui16.cpp

@@ -50,10 +50,8 @@ static x_header_t __g_xbf_hd = { .min = 0, .max = 0, .bpp = 0 };
 static uint8_t __g_font_buf[63];
 
 static uint8_t *__user_font_getdata(int offset, int size) {
-  //ZERO(__g_font_buf);
   get_spi_flash_data((char *)__g_font_buf, offset, size);
   return __g_font_buf;
-  //return &buf_test[offset];
 }
 
 static const uint8_t * __user_font_get_bitmap(const lv_font_t * font, uint32_t unicode_letter) {
@@ -67,9 +65,7 @@ static const uint8_t * __user_font_get_bitmap(const lv_font_t * font, uint32_t u
   uint32_t *p_pos = (uint32_t *)__user_font_getdata(unicode_offset, 4);
   if (p_pos[0] != 0) {
     uint32_t pos = p_pos[0];
-    //glyph_dsc_t * gdsc = (glyph_dsc_t*)__user_font_getdata(pos, 2);
     __user_font_getdata(pos, 2);
-    //return __user_font_getdata(pos+2, gdsc->box_w*__g_xbf_hd.bpp/8);
     return __user_font_getdata(pos + 2, sizeof(__g_font_buf));
   }
   return nullptr;
@@ -97,12 +93,6 @@ static bool __user_font_get_glyph_dsc(const lv_font_t * font, lv_font_glyph_dsc_
   return false;
 }
 
-/*lv_font_t gb2312_puhui32 = {
-.get_glyph_bitmap = __user_font_get_bitmap,
-.get_glyph_dsc = __user_font_get_glyph_dsc,
-.line_height = 25,
-.base_line = 0,
-};*/
 lv_font_t gb2312_puhui32;
 void init_gb2312_font() {
   gb2312_puhui32.get_glyph_bitmap = __user_font_get_bitmap;

Marlin/src/lcd/extui/lib/mks_ui/mks_hardware_test.cpp

@@ -53,11 +53,8 @@ void test_gpio_readlevel_L() {
     #if PIN_EXISTS(MT_DET_2)
       mt_det2_sta = (READ(MT_DET_2_PIN) == 0);
     #endif
-    //mt_det3_sta = (READ(FIL_RUNOUT_3_PIN) == 0);
     endstopx1_sta = (READ(X_MIN_PIN) == 0);
-    //endstopx2_sta = (READ(X_MAX_PIN) == 0);
     endstopy1_sta = (READ(Y_MIN_PIN) == 0);
-    //endstopy2_sta = (READ(Y_MAX_PIN) == 0);
     endstopz1_sta = (READ(Z_MIN_PIN) == 0);
     endstopz2_sta = (READ(Z_MAX_PIN) == 0);
   #endif
@@ -75,11 +72,8 @@ void test_gpio_readlevel_H() {
     #if PIN_EXISTS(MT_DET_2)
       mt_det2_sta = (READ(MT_DET_2_PIN) == 1);
     #endif
-    //mt_det3_sta = (READ(MT_DET_3_PIN) == 1);
     endstopx1_sta = (READ(X_MIN_PIN) == 1);
-    //endstopx2_sta = (READ(X_MAX_PIN) == 1);
     endstopy1_sta = (READ(Y_MIN_PIN) == 1);
-    //endstopy2_sta = (READ(Y_MAX_PIN) == 1);
     endstopz1_sta = (READ(Z_MIN_PIN) == 1);
     endstopz2_sta = (READ(Z_MAX_PIN) == 1);
   #endif
@@ -88,9 +82,7 @@ void test_gpio_readlevel_H() {
 void init_test_gpio() {
   #ifdef MKS_TEST
     SET_INPUT_PULLUP(X_MIN_PIN);
-    //SET_INPUT_PULLUP(X_MAX_PIN);
     SET_INPUT_PULLUP(Y_MIN_PIN);
-    //SET_INPUT_PULLUP(Y_MAX_PIN);
     SET_INPUT_PULLUP(Z_MIN_PIN);
     SET_INPUT_PULLUP(Z_MAX_PIN);
 
@@ -100,7 +92,6 @@ void init_test_gpio() {
     #if PIN_EXISTS(MT_DET_2)
       SET_INPUT_PULLUP(MT_DET_2_PIN);
     #endif
-    //SET_INPUT_PULLUP(MT_DET_3_PIN);
 
     SET_INPUT_PULLUP(MKS_TEST_POWER_LOSS_PIN);
     SET_INPUT_PULLUP(MKS_TEST_PS_ON_PIN);
@@ -122,7 +113,6 @@ void init_test_gpio() {
     #if !MB(MKS_ROBIN_E3P)
       WRITE(E1_ENABLE_PIN, LOW);
     #endif
-    //WRITE(E2_ENABLE_PIN, LOW);
 
     #if MB(MKS_ROBIN_E3P)
       SET_INPUT_PULLUP(PA1);
@@ -167,15 +157,13 @@ void mks_gpio_test() {
         && (READ(PE6) == 0)
         && (READ(PE7) == 0)
       #endif
-    ) // &&(mt_det3_sta == 1))
+    ) 
       disp_det_ok();
     else
       disp_det_error();
 
     if ( (endstopx1_sta == 1)
-      //&& (endstopx2_sta == 1)
       && (endstopy1_sta == 1)
-      //&& (endstopy2_sta == 1)
       && (endstopz1_sta == 1)
       && (endstopz2_sta == 1)
     )
@@ -195,9 +183,7 @@ void mks_hardware_test() {
       #if !MB(MKS_ROBIN_E3P)
         WRITE(E1_DIR_PIN, LOW);
       #endif
-      //WRITE(E2_DIR_PIN, LOW);
       thermalManager.fan_speed[0] = 255;
-      //WRITE(HEATER_2_PIN, HIGH); // HE2
       #if !MB(MKS_ROBIN_E3P)
         WRITE(HEATER_1_PIN, HIGH); // HE1
       #endif
@@ -212,9 +198,7 @@ void mks_hardware_test() {
       #if !MB(MKS_ROBIN_E3P)
         WRITE(E1_DIR_PIN, HIGH);
       #endif
-      //WRITE(E2_DIR_PIN, HIGH);
       thermalManager.fan_speed[0] = 0;
-      //WRITE(HEATER_2_PIN, LOW); // HE2
       #if !MB(MKS_ROBIN_E3P)
         WRITE(HEATER_1_PIN, LOW); // HE1
       #endif
@@ -229,7 +213,6 @@ void mks_hardware_test() {
       // nothing here
     }
     else {
-      //mks_test_beeper();
     }
 
     if (disp_state == PRINT_READY_UI)
@@ -637,7 +620,6 @@ void disp_string(uint16_t x, uint16_t y, const char * string, uint16_t charColor
   }
 }
 
-//static lv_obj_t *scr_test;
 void disp_assets_update() {
   SPI_TFT.LCD_clear(0x0000);
   disp_string(100, 140, "Assets Updating...", 0xFFFF, 0x0000);

Marlin/src/lcd/extui/lib/mks_ui/pic_manager.cpp

@@ -36,7 +36,6 @@
 #include "../../../../MarlinCore.h"
 
 extern uint16_t DeviceCode;
-extern unsigned char bmp_public_buf[17 * 1024];
 
 #if ENABLED(SDSUPPORT)
   extern char *createFilename(char * const buffer, const dir_t &p);
@@ -55,7 +54,6 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
   "bmp_preHeat.bin",
   "bmp_extruct.bin",
   "bmp_mov.bin",
-  // "bmp_Zero.bin",
   "bmp_leveling.bin",
   "bmp_filamentchange.bin",
 
@@ -65,13 +63,8 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
   "bmp_speed255.bin",
   "bmp_speed127.bin",
   "bmp_speed0.bin",
-
-  //preheat screen
-  // "bmp_Add.bin",
-  // "bmp_Dec.bin",
   "bmp_speed0.bin",
-  // "bmp_Extru2.bin",
-  // "bmp_Extru1.bin",
+
   "bmp_bed.bin",
   "bmp_step1_degree.bin",
   "bmp_step5_degree.bin",
@@ -113,7 +106,6 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
   //operation screen
   "bmp_auto_off.bin",
   "bmp_speed.bin",
-  //"bmp_Mamual.bin", //TODO: didn't find it.. changed to bmp_manual_off.bin
   "bmp_fan.bin",
   "bmp_temp.bin",
   "bmp_extrude_opr.bin",
@@ -125,7 +117,6 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
   "bmp_step10_percent.bin",
   "bmp_extruct_sel.bin",
   "bmp_mov_changespeed.bin",
-  // "bmp_extrude_opr.bin", equal to "bmp_Extruct.bin"
   "bmp_mov_sel.bin",
   "bmp_speed_extruct.bin",
 
@@ -182,9 +173,6 @@ static const char assets[][LONG_FILENAME_LENGTH] = {
 
   // settings screen
   "bmp_about.bin",
-  //"bmp_Language.bin",
-  //"bmp_Fan.bin",
-  //"bmp_manual_off.bin",
 
   //start screen
   "bmp_printing.bin",
@@ -373,8 +361,6 @@ uint32_t Pic_Info_Write(uint8_t *P_name, uint32_t P_size) {
   return Pic_SaveAddr;
 }
 
-uint8_t public_buf[512];
-
 #if ENABLED(SDSUPPORT)
 
   static void dosName2LongName(const char dosName[11], char* longName) {

Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h

@@ -95,9 +95,7 @@
   #define PIC_NAME_ADDR                 0x003000      // Pic information addr
   #define PIC_SIZE_ADDR                 0x007000      // Pic size information addr
   #define PIC_COUNTER_ADDR              0x008000      // Pic total number
-  //#define PER_PIC_SAVE_ADDR           0x009000      // Storage address of each picture
   #define PIC_LOGO_ADDR                 0x009000      // Logo addr
-  //#define PIC_DATA_ADDR               0x02F000      //
 
   // TFT35
   #define DEFAULT_VIEW_ADDR_TFT35       0xC5800

Marlin/src/lcd/extui/lib/mks_ui/printer_operation.cpp

@@ -69,9 +69,6 @@ void printer_state_polling() {
         uiCfg.print_state = PAUSED;
         uiCfg.current_e_position_bak = current_position.e;
 
-        // #if ENABLED(POWER_LOSS_RECOVERY)
-        //  if (recovery.enabled) recovery.save(true);
-        // #endif
         gCfgItems.pause_reprint = true;
         update_spi_flash();
       }

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_en.h

@@ -381,28 +381,12 @@
 #define FILAMENT_EXT1_TEXT_EN         "Extrusion2"
 #define FILAMENT_HEAT_TEXT_EN         "Preheat"
 #define FILAMENT_STOP_TEXT_EN         "Stop"
-//#define FILAMENT_CHANGE_TEXT_EN       "Filament replace"
 #define FILAMENT_TIPS2_TEXT_EN        "T:"
 #define FILAMENT_TIPS3_TEXT_EN        "Loading..."
 #define FILAMENT_TIPS4_TEXT_EN        "Unloading..."
 #define FILAMENT_TIPS5_TEXT_EN        "Temp is too low to go,please heat"
 #define FILAMENT_TIPS6_TEXT_EN        "Completed"
 
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_EN           "Please click <Load> or <unload> \nto replace filament!"
-  #define FILAMENT_CHANGE_TEXT_EN                 "Please click <Load> or <unload>,\nAfter pinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_EN       "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_EN     "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_EN   "Heat completed,please load filament to extruder,and click <confirm> for start loading."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_EN   "Please load filament to extruder,and click <confirm> for start loading."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_EN  "Heat completed,please click <confirm> for start unloading.!"
-  #define FILAMENT_DIALOG_LOADING_TIPS_EN         "Is loading ,please wait!"
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_EN       "Is unloading,please wait!"
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_EN   "Load filament completed,click <confirm> for return!"
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_EN "Unload filament completed,click <confirm> for return!"
-#endif
-
-
 #define FILAMENT_CHANGE_TEXT_EN                 "Please click <Load> \nor <unload>,After \npinter pause."
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_EN       "Heating up the nozzle,\nplease wait..."
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_EN     "Heating up the nozzle,\nplease wait..."
@@ -419,11 +403,7 @@
 #define PRE_HEAT_BED_TEXT_EN            "Bed"
 
 #define FILE_LOADING_EN                 "Loading......"
-#if 0
-  #define NO_FILE_AND_CHECK_EN          "No files found!Please insert SD card or U disk!"
-#else
-  #define NO_FILE_AND_CHECK_EN          "  No files found!\n            Check the file system configuration!"
-#endif
+#define NO_FILE_AND_CHECK_EN          "  No files found!\n            Check the file system configuration!"
 
 #define NO_FILE_EN                          "No files found!"
 
@@ -491,7 +471,6 @@
 #define DIALOG_RETRY_EN                     "Retry"
 #define DIALOG_STOP_EN                      "Stop"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_EN   "Reprint from breakpoint?"
-//#define DIALOG_UNBIND_PRINTER_EN          "Unbind the printer?"
 #define DIALOG_ERROR_TIPS1_EN               "Error:no file,please check it again."
 #define DIALOG_ERROR_TIPS2_EN               "Error:transaction failed.please check display baudrate \nwhether as the same as mainboard!"
 #define DIALOG_ERROR_TIPS3_EN               "Error:file name or path is too long!"
@@ -691,34 +670,16 @@
 
 //manual ip
 #define MANUAL_IP_TITLE_EN          "Manual IP"
-#define MANUAL_IP_CANCEL_EN          "< Cancel"
+#define MANUAL_IP_CANCEL_EN         "< Cancel"
 #define MANUAL_IP_APPLY_EN          "Join >"
 #define MANUAL_IP_ADDRESS_EN        "IP Address"
 #define MANUAL_IP_MASK_EN           "Subnet Mask"
 #define MANUAL_IP_GATEWAY_EN        "Default Gateway"
 #define MANUAL_IP_SERVER_EN         "Name Server"
 #define MANUAL_IP_INIT_DATA_EN      "0.0.0.0"
-#define MANUAL_TEXT_POINT_EN         "."
+#define MANUAL_TEXT_POINT_EN        "."
 #define MANUAL_TEXT_ENTER_EN        "enter"
 
-//Wifi name
-//#define TEXT_WIFI_MENU_TITLE_EN "WI-FI"
-//#define TEXT_WIFI_SAPCE_EN  "space"
-//#define TEXT_WIFI_LETTER_EN  "abc"
-//#define TEXT_WIFI_DIGITAL_EN  "123"
-//#define TEXT_WIFI_SYMBOL_EN  "#+="
-//#define TEXT_WIFI_PASSWORD_EN "Password"
-
-//#define TEXT_WIFI_POINT_BOLD_EN "`"
-
-//#define TEXT_WIFI_JOINING_EN  "Joining\nNetwork..."
-//#define TEXT_WIFI_FAILED_JOIN_EN  "Failed to\nJoin Wi-Fi"
-//#define TEXT_WIFI_WIFI_CONECTED_EN "Wi-Fi\nConnected"
-
-//#define TEXT_BUTTON_DISCONECTED_EN "Disconnect"
-//#define TEXT_WIFI_FORGET_EN "Forget Network"
-//#define TEXT_DISCONECTED_EN "Wi-Fi Connected"
-
 #define TEXT_FORGET_TIPS_TITLE_EN "Forget Network"
 #define TEXT_FORGET_NETWORK_TIPS1_EN "Are you sure you want to\nforget this network?"
 #define TEXT_FORGET_NETWORK_TIPS2_EN "This machine will no longer\njoin this Wi-Fi Network."

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_fr.h

@@ -135,26 +135,12 @@
 #define FILAMENT_EXT1_TEXT_FR         "Extr2"
 #define FILAMENT_HEAT_TEXT_FR         "Preheat"
 #define FILAMENT_STOP_TEXT_FR         "Arrêter"
-//#define FILAMENT_CHANGE_TEXT_FR     "Filament remplacer"
 #define FILAMENT_TIPS2_TEXT_FR        "T:"
 #define FILAMENT_TIPS3_TEXT_FR        "Insérer le filament..."
 #define FILAMENT_TIPS4_TEXT_FR        "éjecter le filament..."
 #define FILAMENT_TIPS5_TEXT_FR        "Température trop basse pour démarrer, chauffez svp"
 #define FILAMENT_TIPS6_TEXT_FR        "Terminé"
 
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_FR             "Please click <Insérer> or <éjecter> \nto replace filament!"
-  #define FILAMENT_CHANGE_TEXT_FR                   "Please click <Insérer> or <éjecter>,\nAfter pinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_FR         "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_FR       "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_FR     "Heat completed,please load filament to extruder,and click <Confirmer> for start loading."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_FR     "Please load filament to extruder,and click <Confirmer> for start loading."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_FR    "Heat completed,please click <Confirmer> for start unloading.!"
-  #define FILAMENT_DIALOG_LOADING_TIPS_FR           "Is loading ,please wait!"
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_FR         "Is unloading,please wait!"
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_FR     "Load filament completed,click <Confirmer> for return!"
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_FR   "Unload filament completed,click <Confirmer> for return!"
-#endif
 #define FILAMENT_CHANGE_TEXT_FR                   "Please click <Load> \nor <unload>,After \npinter pause."
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_FR         "Heating up the nozzle,\nplease wait..."
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_FR       "Heating up the nozzle,\nplease wait..."
@@ -171,16 +157,9 @@
 #define PRE_HEAT_BED_TEXT_FR          "Bed"
 
 #define FILE_LOADING_FR               "Chargement......"
-#if 0
-  #define NO_FILE_AND_CHECK_FR        "Aucun fichier trouvé! Insérez une carte SD ou un disque U!"
-#else
-  #define NO_FILE_AND_CHECK_FR        "Aucun fichier,vérifiez à nouveau!"
-#endif
-
+#define NO_FILE_AND_CHECK_FR          "Aucun fichier, vérifiez à nouveau!"
 #define NO_FILE_FR                    "Pas de fichier!"
 
-
-
 #define EXTRUDER_TEMP_TEXT_FR         "Temper"
 #define EXTRUDER_E_LENGTH1_TEXT_FR    "Extruder1"
 #define EXTRUDER_E_LENGTH2_TEXT_FR    "Extruder2"
@@ -222,7 +201,7 @@
 #define TITLE_ADJUST_FR               "Réglage"
 #define TITLE_WIRELESS_FR             "Sans fil"
 #define TITLE_FILAMENT_FR             "Remplacer"
-#define TITLE_ABOUT_FR                "A propos"
+#define TITLE_ABOUT_FR                "À propos"
 #define TITLE_FAN_FR                  "Ventilateur"
 #define TITLE_LANGUAGE_FR             "Langue"
 #define TITLE_PAUSE_FR                "Pause"
@@ -247,7 +226,6 @@
 
 #define DIALOG_STOP_FR                "Arrêter"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_FR "Continuer?"
-//#define DIALOG_UNBIND_PRINTER_FR    "Non lié?"
 #define DIALOG_ERROR_TIPS1_FR         "Erreur:error:Aucun fichier, \nvérifiez à nouveau."
 #define DIALOG_ERROR_TIPS2_FR         "Erreur:La opération a échoué. \nVerifiez que le baudrate de l'écran et de \nla carte mère soient identique!"
 #define DIALOG_ERROR_TIPS3_FR         "Erreur: le nom du fichier ou le \nchemin d'accès est trop long."
@@ -261,10 +239,10 @@
 #define MESSAGE_PAUSING_FR        "Parking..."
 #define MESSAGE_CHANGING_FR       "Attente filament pour démarrer"
 #define MESSAGE_UNLOAD_FR         "Attente retrait du filament"
-#define MESSAGE_WAITING_FR        "Presser bouton,pour reprendre"
+#define MESSAGE_WAITING_FR        "Presser bouton, pour reprendre"
 #define MESSAGE_INSERT_FR         "Insérer filament et app. bouton pour continuer..."
 #define MESSAGE_LOAD_FR           "Attente chargement filament"
-#define MESSAGE_PURGE_FR          "Attente Purge filament"
+#define MESSAGE_PURGE_FR          "Attente purge filament"
 #define MESSAGE_RESUME_FR         "Attente reprise impression"
 #define MESSAGE_HEAT_FR           "Presser le bouton pour chauffer..."
 #define MESSAGE_HEATING_FR        "Buse en chauffe Patienter SVP..."

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_it.h

@@ -135,26 +135,12 @@
 #define FILAMENT_EXT1_TEXT_IT         "Estrude2"
 #define FILAMENT_HEAT_TEXT_IT         "Preriscaldamento"
 #define FILAMENT_STOP_TEXT_IT         "Stop"
-//#define FILAMENT_CHANGE_TEXT_IT     "Filamento"
 #define FILAMENT_TIPS2_TEXT_IT        "T:"
 #define FILAMENT_TIPS3_TEXT_IT        "Inserimento del filamento..."
 #define FILAMENT_TIPS4_TEXT_IT        "Estrazione del filamento..."
 #define FILAMENT_TIPS5_TEXT_IT        "Temp is too low to go,please heat"
 #define FILAMENT_TIPS6_TEXT_IT        "Completato"
 
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_IT           "Please click <Estru> or <Ritra> \nto replace filament!"
-  #define FILAMENT_CHANGE_TEXT_IT                 "Please click <Estru> or <Ritra>,\nAfter pinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_IT       "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_IT     "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_IT   "Heat completed,please load filament to extruder,and click <Conferma> for start loading."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_IT   "Please load filament to extruder,and click <Conferma> for start loading."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_IT  "Heat completed,please click <Conferma> for start unloading.!"
-  #define FILAMENT_DIALOG_LOADING_TIPS_IT         "Is loading ,please wait!"
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_IT       "Is unloading,please wait!"
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_IT   "Load filament completed,click <Conferma> for return!"
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_IT "Unload filament completed,click <Conferma> for return!"
-#endif
 #define FILAMENT_CHANGE_TEXT_IT                 "Please click <Load> \nor <unload>,After \npinter pause."
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_IT       "Heating up the nozzle,please wait..."
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_IT     "Heating up the nozzle,please wait..."
@@ -166,16 +152,11 @@
 #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_IT   "Load filament completed,\nclick <confirm> for return!"
 #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_IT "Unload filament completed,\nclick <confirm> for return!"
 
-
 #define PRE_HEAT_EXT_TEXT_IT              "E"
 #define PRE_HEAT_BED_TEXT_IT              "Piano"
 
 #define FILE_LOADING_IT                   "Caricamento......"
-#if 0
-  #define NO_FILE_AND_CHECK_IT              "Nessun file trovato! Inserisci la scheda SD o il disco U!"
-#endif
 #define NO_FILE_AND_CHECK_IT              "Nessun file,\n          per favore controllare di nuovo!"
-
 #define NO_FILE_IT                        "Nessun file!"
 
 #define EXTRUDER_TEMP_TEXT_IT             "Temper"
@@ -241,7 +222,6 @@
 #define DIALOG_CANCEL_PRINT_IT            "Stop stampa?"
 #define DIALOG_STOP_IT                    "Stop"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_IT "Continua a stampare dal \npunto di interruzione?"
-//#define DIALOG_UNBIND_PRINTER_IT        "Libero?"
 #define DIALOG_ERROR_TIPS1_IT             "Errore: nessun file, \nper favore controllare di nuovo."
 #define DIALOG_ERROR_TIPS2_IT             "Errore: operazione non riuscita, \nsi prega di controllare se il baudrate del \ndisplay è lo stesso scheda madre"
 #define DIALOG_ERROR_TIPS3_IT             "Errore: il nome del file o il \npercorso è troppo lungo!"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_ru.h

@@ -135,26 +135,12 @@
 #define FILAMENT_EXT1_TEXT_RU           "экструдер2"
 #define FILAMENT_HEAT_TEXT_RU           "нагрев"
 #define FILAMENT_STOP_TEXT_RU           "стоп"
-//#define FILAMENT_CHANGE_TEXT_RU           "замена"
 #define FILAMENT_TIPS2_TEXT_RU          "T:"
 #define FILAMENT_TIPS3_TEXT_RU          "втянуть..."
 #define FILAMENT_TIPS4_TEXT_RU          "вядавить..."
 #define FILAMENT_TIPS5_TEXT_RU          "Низкая температура, \nнеобходим нагрев"
 #define FILAMENT_TIPS6_TEXT_RU          "завершено"
 
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_RU                 "Please click <втянуть> or <выдавить> \nto replace filament!"
-  #define FILAMENT_CHANGE_TEXT_RU                       "Please click <втянуть> or <выдавить>,\nAfter pinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_RU             "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_RU           "Heating up the nozzle,please wait..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_RU         "Heat completed,please load filament to extruder,and click <да> for start loading."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_RU         "Please load filament to extruder,and click <да> for start loading."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_RU        "Heat completed,please click <да> for start unloading.!"
-  #define FILAMENT_DIALOG_LOADING_TIPS_RU               "Is loading ,please wait!"
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_RU             "Is unloading,please wait!"
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_RU         "Load filament completed,click <да> for return!"
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_RU       "Unload filament completed,click <да> for return!"
-#endif
 #define FILAMENT_CHANGE_TEXT_RU                       "Please click <Load> \nor <unload>,After \npinter pause."
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_RU             "Heating up the nozzle,\nplease wait..."
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_RU           "Heating up the nozzle,\nplease wait..."
@@ -166,14 +152,10 @@
 #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_RU         "Load filament completed,\nclick <confirm> for return!"
 #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_RU       "Unload filament completed,\nclick <confirm> for return!"
 
-
 #define PRE_HEAT_EXT_TEXT_RU                "E"
 #define PRE_HEAT_BED_TEXT_RU                "стол"
 
 #define FILE_LOADING_RU                     "загрузка......"
-#if 0
-  #define NO_FILE_AND_CHECK_RU                "Файлы не найдены! Вставьте SD-карту или диск U!"
-#endif
 #define NO_FILE_AND_CHECK_RU                "нет файла,попробуйте ещё раз!"
 
 #define NO_FILE_RU                          "нет файла!"
@@ -242,7 +224,6 @@
 #define DIALOG_CANCEL_PRINT_RU              "стоп?"
 #define DIALOG_STOP_RU                      "стоп"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_RU   "продолжить?"
-//#define DIALOG_UNBIND_PRINTER_RU          "разрыв?"
 #define DIALOG_ERROR_TIPS1_RU               "ошибка:нет файла, попробуйте ещё раз."
 #define DIALOG_ERROR_TIPS2_RU               "ошибка:сбой передачи. установите скорость \nпередачи данных как на плате управления!"
 #define DIALOG_ERROR_TIPS3_RU               "ошибка: имя файла слишком длинное!"
@@ -268,9 +249,9 @@
 #define MESSAGE_PURGE_MORE_RU         "чистка"
 #define MESSAGE_CONTINUE_PRINT_RU     "Распечатать"
 #define EEPROM_SETTINGS_TITLE_RU      "Настройки EEPROM"
-#define EEPROM_SETTINGS_STORE_RU      "Сохранение настроек в EEPROM"
+#define EEPROM_SETTINGS_STORE_RU      "Cохранение настроек в EEPROM"
 #define EEPROM_SETTINGS_READ_RU       "Чтение настроек из EEPROM"
-#define EEPROM_SETTINGS_REVERT_RU     "Восстановить заводские настройки по умолчанию"
+#define EEPROM_SETTINGS_REVERT_RU     "Bосстановить заводские настройки по умолчанию"
 
 #define EEPROM_STORE_TIPS_RU          "Сохранить настройки в EEPROM?"
 #define EEPROM_READ_TIPS_RU           "Читать настройки из EEPROM?"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_s_cn.h

@@ -177,42 +177,42 @@
 #define E0_STEPS_CN                   "E0轴脉冲"
 #define E1_STEPS_CN                   "E1轴脉冲"
 
-#define TMC_CURRENT_CONF_TITLE_CN   "机器参数>TMC电流设置"
-#define X_TMC_CURRENT_CN            "X轴电流(毫安)"
-#define Y_TMC_CURRENT_CN            "Y轴电流(毫安)"
-#define Z_TMC_CURRENT_CN            "Z轴电流(毫安)"
-#define E0_TMC_CURRENT_CN           "E0轴电流(毫安)"
-#define E1_TMC_CURRENT_CN           "E1轴电流(毫安)"
-
-#define TMC_MODE_CONF_TITLE_CN  "机器参数>TMC模式设置"
-#define X_TMC_MODE_CN           "X轴是否使能静音模式"
-#define Y_TMC_MODE_CN           "Y轴是否使能静音模式"
-#define Z_TMC_MODE_CN           "Z轴是否使能静音模式"
-#define E0_TMC_MODE_CN          "E0轴是否使能静音模式"
-#define E1_TMC_MODE_CN          "E1轴是否使能静音模式"
-
-#define MOTORDIR_CONF_TITLE_CN          "机器参数>电机方向"
-#define X_MOTORDIR_CN                   "X轴电机方向"
-#define Y_MOTORDIR_CN                   "Y轴电机方向"
-#define Z_MOTORDIR_CN                   "Z轴电机方向"
-#define E0_MOTORDIR_CN                  "E0轴电机方向"
-#define E1_MOTORDIR_CN                  "E1轴电机方向"
-#define INVERT_P_CN                     "正向"
-#define INVERT_N_CN                     "反向"
-
-#define HOMEFEEDRATE_CONF_TITLE_CN      "机器参数>归零速度"
-#define X_HOMESPEED_CN                  "XY轴归零速度"
-#define Y_HOMESPEED_CN                  "Y轴归零速度"
-#define Z_HOMESPEED_CN                  "Z轴归零速度"
-
-#define ADVANCED_CONF_TITLE_CN          "机器参数>高级设置"
-#define PWROFF_DECTION_CN               "断电检测模块"
-#define PWROFF_AFTER_PRINT_CN           "启动打完关机功能"
-#define HAVE_UPS_CN                     "机器配备UPS电源"
-#define Z2_AND_Z2ENDSTOP_CONF_CN        "双Z轴双限位功能设置"
-#define ENABLE_PINS_CONF_CN             "电机使能脚电平设置"
-#define WIFI_SETTINGS_CN                "Wi-Fi参数设置"
-#define ENCODER_SETTINGS_CN             "旋钮设置"
+#define TMC_CURRENT_CONF_TITLE_CN     "机器参数>TMC电流设置"
+#define X_TMC_CURRENT_CN              "X轴电流(毫安)"
+#define Y_TMC_CURRENT_CN              "Y轴电流(毫安)"
+#define Z_TMC_CURRENT_CN              "Z轴电流(毫安)"
+#define E0_TMC_CURRENT_CN             "E0轴电流(毫安)"
+#define E1_TMC_CURRENT_CN             "E1轴电流(毫安)"
+
+#define TMC_MODE_CONF_TITLE_CN        "机器参数>TMC模式设置"
+#define X_TMC_MODE_CN                 "X轴是否使能静音模式"
+#define Y_TMC_MODE_CN                 "Y轴是否使能静音模式"
+#define Z_TMC_MODE_CN                 "Z轴是否使能静音模式"
+#define E0_TMC_MODE_CN                "E0轴是否使能静音模式"
+#define E1_TMC_MODE_CN                "E1轴是否使能静音模式"
+
+#define MOTORDIR_CONF_TITLE_CN        "机器参数>电机方向"
+#define X_MOTORDIR_CN                 "X轴电机方向"
+#define Y_MOTORDIR_CN                 "Y轴电机方向"
+#define Z_MOTORDIR_CN                 "Z轴电机方向"
+#define E0_MOTORDIR_CN                "E0轴电机方向"
+#define E1_MOTORDIR_CN                "E1轴电机方向"
+#define INVERT_P_CN                   "正向"
+#define INVERT_N_CN                   "反向"
+
+#define HOMEFEEDRATE_CONF_TITLE_CN    "机器参数>归零速度"
+#define X_HOMESPEED_CN                "XY轴归零速度"
+#define Y_HOMESPEED_CN                "Y轴归零速度"
+#define Z_HOMESPEED_CN                "Z轴归零速度"
+
+#define ADVANCED_CONF_TITLE_CN        "机器参数>高级设置"
+#define PWROFF_DECTION_CN             "断电检测模块"
+#define PWROFF_AFTER_PRINT_CN         "启动打完关机功能"
+#define HAVE_UPS_CN                   "机器配备UPS电源"
+#define Z2_AND_Z2ENDSTOP_CONF_CN      "双Z轴双限位功能设置"
+#define ENABLE_PINS_CONF_CN           "电机使能脚电平设置"
+#define WIFI_SETTINGS_CN              "Wi-Fi参数设置"
+#define ENCODER_SETTINGS_CN           "旋钮设置"
 
 #define Z2_AND_Z2ENDSTOP_CONF_TITLE_CN  "双z双限位设置"
 #define Z2_ENABLE_CN                    "启用Z2轴"
@@ -225,23 +225,23 @@
 #define Z_ENABLE_PINS_INVERT_CN         "Z轴电机使能电平"
 #define E_ENABLE_PINS_INVERT_CN         "E轴电机使能电平"
 
-#define PAUSE_POSITION_CN         "打印暂停位置设置"
-#define PAUSE_POSITION_X_CN       "X轴暂停位置(绝对位置,-1无效)"
-#define PAUSE_POSITION_Y_CN       "Y轴暂停位置(绝对位置,-1无效)"
-#define PAUSE_POSITION_Z_CN       "Z轴暂停位置(相对位置,-1无效)"
-#define WIFI_SETTINGS_TITLE_CN    "机器参数>Wi-Fi设置"
-#define WIFI_SETTINGS_MODE_CN     "Wi-Fi 模式"
-#define WIFI_SETTINGS_NAME_CN     "Wi-Fi 名称: "
-#define WIFI_SETTINGS_PASSWORD_CN "Wi-Fi 密码: "
-#define WIFI_SETTINGS_CLOUD_CN    "是否使用云服务?"
-#define WIFI_SETTINGS_CONFIG_CN   "配置"
-#define WIFI_SETTINGS_EDIT_CN     "编辑"
-#define WIFI_CONFIG_TIPS_CN       "进行Wi-Fi配置?"
-
-#define OFFSET_TITLE_CN  "机器参数>偏移设置"
-#define OFFSET_X_CN      "X轴与调平开关偏移"
-#define OFFSET_Y_CN      "Y轴与调平开关偏移"
-#define OFFSET_Z_CN      "Z轴与调平开关偏移"
+#define PAUSE_POSITION_CN               "打印暂停位置设置"
+#define PAUSE_POSITION_X_CN             "X轴暂停位置(绝对位置,-1无效)"
+#define PAUSE_POSITION_Y_CN             "Y轴暂停位置(绝对位置,-1无效)"
+#define PAUSE_POSITION_Z_CN             "Z轴暂停位置(相对位置,-1无效)"
+#define WIFI_SETTINGS_TITLE_CN          "机器参数>Wi-Fi设置"
+#define WIFI_SETTINGS_MODE_CN           "Wi-Fi 模式"
+#define WIFI_SETTINGS_NAME_CN           "Wi-Fi 名称: "
+#define WIFI_SETTINGS_PASSWORD_CN       "Wi-Fi 密码: "
+#define WIFI_SETTINGS_CLOUD_CN          "是否使用云服务?"
+#define WIFI_SETTINGS_CONFIG_CN         "配置"
+#define WIFI_SETTINGS_EDIT_CN           "编辑"
+#define WIFI_CONFIG_TIPS_CN             "进行Wi-Fi配置?"
+
+#define OFFSET_TITLE_CN                 "机器参数>偏移设置"
+#define OFFSET_X_CN                     "X轴与调平开关偏移"
+#define OFFSET_Y_CN                     "Y轴与调平开关偏移"
+#define OFFSET_Z_CN                     "Z轴与调平开关偏移"
 
 #define HOMING_SENSITIVITY_CONF_TITLE_CN      "机器参数>灵敏度调节"
 #define X_SENSITIVITY_CN                      "X轴灵敏度"
@@ -364,12 +364,7 @@
 #define FILAMENT_EXT1_TEXT_CN     "喷头2"
 #define FILAMENT_HEAT_TEXT_CN     "预热"
 #define FILAMENT_STOP_TEXT_CN     "停止"
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_CN "请按<进料>或<退料>进行换料!"
-  #define FILAMENT_CHANGE_TEXT_CN   "待打印机暂停后,请按<进料>或<退料>进行换料!"
-#else
-  #define FILAMENT_CHANGE_TEXT_CN   "待打印机暂停后,\n请按<进料>或<退料>"
-#endif
+#define FILAMENT_CHANGE_TEXT_CN   "待打印机暂停后,\n请按<进料>或<退料>"
 
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_CN       "准备进料,正在加热,请稍等!"
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_CN     "准备退料,正在加热,请稍等!"
@@ -456,7 +451,6 @@
 #define DIALOG_RETRY_CN             "重试"
 #define DIALOG_STOP_CN              "停止"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_CN   "从断点续打?"
-//#define DIALOG_UNBIND_PRINTER_CN  "解除绑定 ?"
 #define DIALOG_ERROR_TIPS1_CN       "错误:找不到文件,请插入sd卡/u盘!"
 #define DIALOG_ERROR_TIPS2_CN       "错误:通信失败,请检查波特率或主板硬件!"
 #define DIALOG_ERROR_TIPS3_CN       "错误:文件名或文件路径太长 !"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_sp.h

@@ -23,13 +23,13 @@
 
 //****************西班牙语***************************
 #define TOOL_TEXT_SP            "Ajustes"
-#define PREHEAT_TEXT_SP         "Precalentar"//"precalent\nar"
+#define PREHEAT_TEXT_SP         "Precalentar"
 #define MOVE_TEXT_SP            "Mover"
 #define HOME_TEXT_SP            "Origen"
 #define PRINT_TEXT_SP           "Imprimir"
 #define EXTRUDE_TEXT_SP         "Extrusor"
-#define LEVELING_TEXT_SP        "Leveling"//"nivelac\nión"
-#define AUTO_LEVELING_TEXT_SP   "Autolevel"//"auto\nnivelación"
+#define LEVELING_TEXT_SP        "Leveling"
+#define AUTO_LEVELING_TEXT_SP   "Autolevel"
 #define SET_TEXT_SP             "Config"
 #define MORE_TEXT_SP            "Más"
 
@@ -135,50 +135,30 @@
 #define FILAMENT_EXT1_TEXT_SP       "Extrusor2"
 #define FILAMENT_HEAT_TEXT_SP       "Precalentar"
 #define FILAMENT_STOP_TEXT_SP       "Parar"
-//#define FILAMENT_CHANGE_TEXT_SP   "Filamento"
 #define FILAMENT_TIPS2_TEXT_SP      "T:"
 #define FILAMENT_TIPS3_TEXT_SP      "Dentro..."
 #define FILAMENT_TIPS4_TEXT_SP      "Fuera..."
 #define FILAMENT_TIPS5_TEXT_SP      "Temperatura demasiado baja, por favor calentar"
 #define FILAMENT_TIPS6_TEXT_SP      "Completado"
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_SP           "Please click <Dentro> or <Fuera> \nto replace filament!"
-  #define FILAMENT_CHANGE_TEXT_SP                 "Please click <Dentro> or <Fuera>,\nAfter pinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_SP       "Calentando el extrusor, por favor espere..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_SP     "Calentando el extrusor, por favor espere..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_SP   "Temperatura alcanzada.Inserte el filamento y luego presione\"Confirmar\"para comenzar la carga."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_SP   "Inserte el filamento y luego presione\"Confirmar\"para comenzar la carga."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_SP  "Temperatura alcanzada.Presione\"Confirmar\"para retirar el filamento."
-  #define FILAMENT_DIALOG_LOADING_TIPS_SP         "Cargando filamento,por favor espere."
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_SP       "Retirando filamento,por favor espere."
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_SP   "Filamento cargado,presione\"Confirmar\"."
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_SP "Filamento retirado,presione\"Confirmar\"."
-#else
-  #define FILAMENT_CHANGE_TEXT_SP                 "Please click <Load> \nor <unload>,After \npinter pause."
-  #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_SP       "Calentando el extrusor,\npor favor espere..."
-  #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_SP     "Calentando el extrusor,\npor favor espere..."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_SP   "Temperatura alcanzada.Inserte el \nfilamento y luego presione\"Confirmar\"\npara comenzar la carga."
-  #define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_SP   "Inserte el filamento y \nluego presione\"Confirmar\"para \ncomenzar la carga."
-  #define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_SP  "Temperatura alcanzada.\nPresione\"Confirmar\"para retirar \nel filamento."
-  #define FILAMENT_DIALOG_LOADING_TIPS_SP         "Cargando filamento,\npor favor espere."
-  #define FILAMENT_DIALOG_UNLOADING_TIPS_SP       "Retirando filamento,\npor favor espere."
-  #define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_SP   "Filamento cargado,\npresione\"Confirmar\"."
-  #define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_SP "Filamento retirado,\npresione\"Confirmar\"."
-#endif
+
+#define FILAMENT_CHANGE_TEXT_SP                 "Please click <Load> \nor <unload>,After \npinter pause."
+#define FILAMENT_DIALOG_LOAD_HEAT_TIPS_SP       "Calentando el extrusor,\npor favor espere..."
+#define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_SP     "Calentando el extrusor,\npor favor espere..."
+#define FILAMENT_DIALOG_LOAD_CONFIRM1_TIPS_SP   "Temperatura alcanzada.Inserte el \nfilamento y luego presione\"Confirmar\"\npara comenzar la carga."
+#define FILAMENT_DIALOG_LOAD_CONFIRM2_TIPS_SP   "Inserte el filamento y \nluego presione\"Confirmar\"para \ncomenzar la carga."
+#define FILAMENT_DIALOG_UNLOAD_CONFIRM_TIPS_SP  "Temperatura alcanzada.\nPresione\"Confirmar\"para retirar \nel filamento."
+#define FILAMENT_DIALOG_LOADING_TIPS_SP         "Cargando filamento,\npor favor espere."
+#define FILAMENT_DIALOG_UNLOADING_TIPS_SP       "Retirando filamento,\npor favor espere."
+#define FILAMENT_DIALOG_LOAD_COMPLETE_TIPS_SP   "Filamento cargado,\npresione\"Confirmar\"."
+#define FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_SP "Filamento retirado,\npresione\"Confirmar\"."
 
 #define PRE_HEAT_EXT_TEXT_SP        "Extrusor"
 #define PRE_HEAT_BED_TEXT_SP        "cama"
 
 #define FILE_LOADING_SP             "Cargando......"
-#if 0
-  #define NO_FILE_AND_CHECK_SP        "No se encontraron archivos! Por favor, inserte la tarjeta SD o el disco U!"
-#endif
 #define NO_FILE_AND_CHECK_SP        "Archivo no encontrado,\n         por favor insertar SD o disco USB!"
-
 #define NO_FILE_SP                  "Sin archivo!"
 
-
-
 #define EXTRUDER_TEMP_TEXT_SP       "Temper"
 #define EXTRUDER_E_LENGTH1_TEXT_SP  "Extrusor1"
 #define EXTRUDER_E_LENGTH2_TEXT_SP  "Extrusor2"
@@ -245,7 +225,6 @@
 #define DIALOG_RETRY_SP             "Reintentar"
 #define DIALOG_STOP_SP              "Stop"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_SP "Reprint from breakpoint?"
-//#define DIALOG_UNBIND_PRINTER_SP    "Unbind the printer?"
 #define DIALOG_ERROR_TIPS1_SP         "Error:archivo no encontrado, \npor favor insertar SD o disco USB."
 #define DIALOG_ERROR_TIPS2_SP         "error:transacción fallida, \nconfigurar  baudrate del \ndisplay para la placa base!"
 #define DIALOG_ERROR_TIPS3_SP         "Error : nombre de archivo o \nruta demasiado largo!"

Marlin/src/lcd/extui/lib/mks_ui/tft_Language_t_cn.h

@@ -254,7 +254,7 @@
 
 #define TOOL_TEXT_T_CN                  "工具"
 #define PREHEAT_TEXT_T_CN               "預熱"
-#define  MOVE_TEXT_T_CN                 "移動"
+#define MOVE_TEXT_T_CN                  "移動"
 #define HOME_TEXT_T_CN                  "回零"
 #define PRINT_TEXT_T_CN                 "打印"
 #define EXTRUDE_TEXT_T_CN               "擠出"
@@ -364,19 +364,12 @@
 #define FILAMENT_EXT1_TEXT_T_CN         "噴頭2"
 #define FILAMENT_HEAT_TEXT_T_CN         "預熱"
 #define FILAMENT_STOP_TEXT_T_CN         "停止"
-//#define FILAMENT_CHANGE_TEXT_T_CN     "準備換料"
 #define FILAMENT_TIPS2_TEXT_T_CN        "T:"
 #define FILAMENT_TIPS3_TEXT_T_CN        "正在進料"
 #define FILAMENT_TIPS4_TEXT_T_CN        "正在退料"
 #define FILAMENT_TIPS5_TEXT_T_CN        "溫度太低,請先預熱"
 #define FILAMENT_TIPS6_TEXT_T_CN        "換料完成"
-
-#if 0
-  #define FILAMENT_REPLAYS_IDLE_TEXT_T_CN "請按<進料>或<退料>進行換料!"
-  #define FILAMENT_CHANGE_TEXT_T_CN       "待打印機暫停后,請按<進料>或<退料>進行換料!"
-#endif
-
-  #define FILAMENT_CHANGE_TEXT_T_CN       "待打印機暫停后,\n請按<進料>或<退料>"
+#define FILAMENT_CHANGE_TEXT_T_CN       "待打印機暫停后,\n請按<進料>或<退料>"
 
 #define FILAMENT_DIALOG_LOAD_HEAT_TIPS_T_CN       "準備進料,正在加熱,請稍等"
 #define FILAMENT_DIALOG_UNLOAD_HEAT_TIPS_T_CN     "準備退料,正在加熱,請稍等"
@@ -434,8 +427,8 @@
 #define TITLE_PRINTING_T_CN           "正在打印"
 #define TITLE_OPERATION_T_CN          "操作"
 #define TITLE_ADJUST_T_CN             "調整"
-#define  TITLE_WIRELESS_T_CN          "無線網絡"
-#define  TITLE_FILAMENT_T_CN          "換料"
+#define TITLE_WIRELESS_T_CN           "無線網絡"
+#define TITLE_FILAMENT_T_CN           "換料"
 #define TITLE_ABOUT_T_CN              "關於"
 #define TITLE_FAN_T_CN                "風扇"
 #define TITLE_LANGUAGE_T_CN           "語言"
@@ -459,7 +452,6 @@
 #define DIALOG_RETRY_T_CN             "重試"
 #define DIALOG_STOP_T_CN              "停止"
 #define DIALOG_REPRINT_FROM_BREAKPOINT_T_CN "從斷點續打?"
-//#define DIALOG_UNBIND_PRINTER_T_CN    "解除綁定?"
 #define DIALOG_ERROR_TIPS1_T_CN       "錯誤:找不到文件,請插入sd卡/u盤!"
 #define DIALOG_ERROR_TIPS2_T_CN       "錯誤:通信失敗,請檢查波特率或主板硬件!"
 #define DIALOG_ERROR_TIPS3_T_CN       "錯誤:文件名或文件路徑太長!"

Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp

@@ -77,9 +77,10 @@ lv_group_t*  g;
 uint16_t DeviceCode = 0x9488;
 extern uint8_t sel_id;
 
-extern bool flash_preview_begin, default_preview_flg, gcode_preview_over;
+uint8_t bmp_public_buf[14 * 1024];
+uint8_t public_buf[513];
 
-uint8_t bmp_public_buf[17 * 1024];
+extern bool flash_preview_begin, default_preview_flg, gcode_preview_over;
 
 void SysTick_Callback() {
   lv_tick_inc(1);
@@ -109,13 +110,9 @@ void SysTick_Callback() {
   }
 }
 
-extern uint8_t bmp_public_buf[17 * 1024];
-
 void tft_lvgl_init() {
 
-  //uint16_t test_id=0;
   W25QXX.init(SPI_QUARTER_SPEED);
-  //test_id=W25QXX.W25QXX_ReadID();
 
   gCfgItems_init();
   ui_cfg_init();
@@ -129,7 +126,6 @@ void tft_lvgl_init() {
 
   watchdog_refresh();     // LVGL init takes time
 
-  //spi_flash_read_test();
   #if ENABLED(SDSUPPORT)
     UpdateAssets();
     watchdog_refresh();   // LVGL init takes time
@@ -141,7 +137,7 @@ void tft_lvgl_init() {
 
   lv_init();
 
-  lv_disp_buf_init(&disp_buf, bmp_public_buf, nullptr, LV_HOR_RES_MAX * 18); /*Initialize the display buffer*/
+  lv_disp_buf_init(&disp_buf, bmp_public_buf, nullptr, LV_HOR_RES_MAX * 14); /*Initialize the display buffer*/
 
   lv_disp_drv_t disp_drv;     /*Descriptor of a display driver*/
   lv_disp_drv_init(&disp_drv);    /*Basic initialization*/
@@ -273,11 +269,6 @@ bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data) {
 
   tmpTime = millis();
   diffTime = getTickDiff(tmpTime, touch_time1);
-  /*Save the state and save the pressed coordinate*/
-  //data->state = TOUCH_PressValid(last_x, last_y) ? LV_INDEV_STATE_PR : LV_INDEV_STATE_REL;
-  //if (data->state == LV_INDEV_STATE_PR)  ADS7843_Rd_Addata((u16 *)&last_x, (u16 *)&last_y);
-  //touchpad_get_xy(&last_x, &last_y);
-  /*Save the pressed coordinates and the state*/
   if (diffTime > 20) {
     if (get_point(&last_x, &last_y)) {
 
@@ -285,7 +276,6 @@ bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data) {
       data->state = LV_INDEV_STATE_PR;
 
       // Set the coordinates (if released use the last-pressed coordinates)
-
       data->point.x = last_x;
       data->point.y = last_y;
 
@@ -369,11 +359,9 @@ lv_fs_res_t spi_flash_tell_cb(lv_fs_drv_t * drv, void * file_p, uint32_t * pos_p
 }
 
 //sd
-extern uint8_t public_buf[512];
 char *cur_namefff;
 uint32_t sd_read_base_addr = 0, sd_read_addr_offset = 0, small_image_size = 409;
 lv_fs_res_t sd_open_cb (lv_fs_drv_t * drv, void * file_p, const char * path, lv_fs_mode_t mode) {
-  //cur_namefff = strrchr(path, '/');
   char name_buf[100];
   *name_buf = '/';
   strcpy(name_buf + 1, path);
@@ -405,7 +393,6 @@ lv_fs_res_t sd_read_cb (lv_fs_drv_t * drv, void * file_p, void * buf, uint32_t b
   else if (btr == 4) {
     uint8_t header_pic[4] = { 0x04, 0x90, 0x81, 0x0C };
     memcpy(buf, header_pic, 4);
-    //pic_read_addr_offset += 4;
     *br = 4;
   }
   return LV_FS_RES_OK;
@@ -453,9 +440,6 @@ void lv_encoder_pin_init() {
 }
 
 #if 1 // HAS_ENCODER_ACTION
-
-  //static const int8_t encoderDirection = 1;
-  //static int16_t enc_Direction;
   void lv_update_encoder() {
     static uint32_t encoder_time1;
     uint32_t tmpTime, diffTime = 0;
@@ -487,9 +471,6 @@ void lv_encoder_pin_init() {
         #define encrot1 1
         #define encrot2 2
 
-        // Manage encoder rotation
-        //#define ENCODER_SPIN(_E1, _E2) switch (lastEncoderBits) { case _E1: enc_Direction += encoderDirection; break; case _E2: enc_Direction -= encoderDirection; }
-
         uint8_t enc = 0;
         if (buttons & EN_A) enc |= B01;
         if (buttons & EN_B) enc |= B10;

Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.h

@@ -35,6 +35,9 @@
 //#define TFT_ROTATION TFT_ROTATE_180
 #define MKS_WIFI_MODULE 0
 
+extern uint8_t bmp_public_buf[14 * 1024];
+extern uint8_t public_buf[513];
+
 extern void tft_lvgl_init();
 extern void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p);
 extern bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data);

Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.cpp

@@ -149,10 +149,6 @@ void machine_setting_disp() {
     machine_menu.CalibrationRadius         = CALIBRATION_RADIUS_CN;
 
     machine_menu.LevelingSubXYZConfTitle = XYZ_LEVEL_CONF_TITLE_CN;
-    // machine_menu.ProbeMaxLeft=PROBE_REACH_MAX_LEFT_CN;
-    // machine_menu.ProbeMaxRigh=PROBE_REACH_MAX_RIGHT_CN;
-    // machine_menu.ProbeMaxfront=PROBE_REACH_MAX_FRONT_CN;
-    // machine_menu.ProbeMaxback=PROBE_REACH_MAX_BACK_CN;
 
     machine_menu.TemperatureConfTitle = TEMPERATURE_CONF_TITLE_CN;
     machine_menu.NozzleConf           = NOZZLE_CONF_CN;
@@ -167,7 +163,6 @@ void machine_setting_disp() {
     machine_menu.NozzleMaxTemperature = NOZZLE_MAX_TEMPERATURE_CN;
     machine_menu.Extrude_Min_Temper   = EXTRUD_MIN_TEMPER_CN;
 
-    // machine_menu.HotbedEnable=HOTBED_ENABLE_CN;
     machine_menu.HotbedConfTitle      = HOTBED_CONF_TITLE_CN;
     machine_menu.HotbedAjustType      = HOTBED_ADJUST_CN;
     machine_menu.HotbedMinTemperature = HOTBED_MIN_TEMPERATURE_CN;
@@ -242,7 +237,6 @@ void machine_setting_disp() {
 
     machine_menu.HomeFeedRateConfTitle = HOMEFEEDRATE_CONF_TITLE_CN;
     machine_menu.XY_HomeFeedRate       = X_HOMESPEED_CN;
-    // machine_menu.Y_HomeFeedRate=Y_HOMESPEED_CN;
     machine_menu.Z_HomeFeedRate = Z_HOMESPEED_CN;
 
     machine_menu.AdvancedConfTitle = ADVANCED_CONF_TITLE_CN;
@@ -382,10 +376,6 @@ void machine_setting_disp() {
     machine_menu.CalibrationRadius         = CALIBRATION_RADIUS_T_CN;
 
     machine_menu.LevelingSubXYZConfTitle = XYZ_LEVEL_CONF_TITLE_T_CN;
-    // machine_menu.ProbeMaxLeft=PROBE_REACH_MAX_LEFT_T_CN;
-    // machine_menu.ProbeMaxRigh=PROBE_REACH_MAX_RIGHT_T_CN;
-    // machine_menu.ProbeMaxfront=PROBE_REACH_MAX_FRONT_T_CN;
-    // machine_menu.ProbeMaxback=PROBE_REACH_MAX_BACK_T_CN;
 
     machine_menu.TemperatureConfTitle = TEMPERATURE_CONF_TITLE_T_CN;
     machine_menu.NozzleConf           = NOZZLE_CONF_T_CN;
@@ -400,7 +390,6 @@ void machine_setting_disp() {
     machine_menu.NozzleMaxTemperature = NOZZLE_MAX_TEMPERATURE_T_CN;
     machine_menu.Extrude_Min_Temper   = EXTRUD_MIN_TEMPER_T_CN;
 
-    // machine_menu.HotbedEnable=HOTBED_ENABLE_T_CN;
     machine_menu.HotbedConfTitle      = HOTBED_CONF_TITLE_T_CN;
     machine_menu.HotbedAjustType      = HOTBED_ADJUST_T_CN;
     machine_menu.HotbedMinTemperature = HOTBED_MIN_TEMPERATURE_T_CN;
@@ -475,7 +464,6 @@ void machine_setting_disp() {
 
     machine_menu.HomeFeedRateConfTitle = HOMEFEEDRATE_CONF_TITLE_T_CN;
     machine_menu.XY_HomeFeedRate       = X_HOMESPEED_T_CN;
-    // machine_menu.Y_HomeFeedRate=Y_HOMESPEED_T_CN;
     machine_menu.Z_HomeFeedRate = Z_HOMESPEED_T_CN;
 
     machine_menu.AdvancedConfTitle = ADVANCED_CONF_TITLE_T_CN;
@@ -499,8 +487,6 @@ void machine_setting_disp() {
     machine_menu.key_back    = KEY_BACK_T_CN;
     machine_menu.key_reset   = KEY_REST_T_CN;
     machine_menu.key_confirm = KEY_CONFIRM_T_CN;
-    // machine_menu.high_level = MOTOR_EN_HIGH_LEVEL_T_CN;
-    // machine_menu.low_level = MOTOR_EN_LOW_LEVEL_T_CN;
 
     machine_menu.PausePosText = PAUSE_POSITION_T_CN;
     machine_menu.xPos         = PAUSE_POSITION_X_T_CN;
@@ -618,10 +604,6 @@ void machine_setting_disp() {
     machine_menu.CalibrationRadius         = CALIBRATION_RADIUS_EN;
 
     machine_menu.LevelingSubXYZConfTitle = XYZ_LEVEL_CONF_TITLE_EN;
-    // machine_menu.Level_positon=PROBE_REACH_MAX_LEFT_EN;
-    // machine_menu.ProbeMaxRigh=PROBE_REACH_MAX_RIGHT_EN;
-    // machine_menu.ProbeMaxfront=PROBE_REACH_MAX_FRONT_EN;
-    // machine_menu.ProbeMaxback=PROBE_REACH_MAX_BACK_EN;
 
     machine_menu.TemperatureConfTitle = TEMPERATURE_CONF_TITLE_EN;
     machine_menu.NozzleConf           = NOZZLE_CONF_EN;
@@ -711,7 +693,6 @@ void machine_setting_disp() {
 
     machine_menu.HomeFeedRateConfTitle = HOMEFEEDRATE_CONF_TITLE_EN;
     machine_menu.XY_HomeFeedRate       = X_HOMESPEED_EN;
-    // machine_menu.Y_HomeFeedRate=Y_HOMESPEED_EN;
     machine_menu.Z_HomeFeedRate = Z_HOMESPEED_EN;
 
     machine_menu.AdvancedConfTitle = ADVANCED_CONF_TITLE_EN;
@@ -823,7 +804,6 @@ void disp_language_init() {
 
   about_menu.type_name  = ABOUT_TYPE_TEXT;
   about_menu.firmware_v = ABOUT_VERSION_TEXT;
-  // about_menu.wifi = ABOUT_WIFI_TEXT;
 
   wifi_menu.ip           = WIFI_IP_TEXT;
   wifi_menu.wifi         = WIFI_NAME_TEXT;
@@ -861,7 +841,7 @@ void disp_language_init() {
     tips_menu.joining      = TEXT_WIFI_JOINING_EN;
     tips_menu.failedJoin   = TEXT_WIFI_FAILED_JOIN_EN;
     tips_menu.wifiConected = TEXT_WIFI_WIFI_CONECTED_EN;
-  #endif  //MKS_WIFI_MODULE
+  #endif
   machine_setting_disp();
 
   operation_menu.babystep = TEXT_BABY_STEP_EN;
@@ -923,7 +903,7 @@ void disp_language_init() {
       file_menu.page_down         = PAGE_DOWN_TEXT_CN;
       file_menu.file_loading      = FILE_LOADING_CN;
       file_menu.no_file           = NO_FILE_CN;
-      file_menu.no_file_and_check = NO_FILE_CN;// NO_FILE_AND_CHECK_CN;
+      file_menu.no_file_and_check = NO_FILE_CN;
       //
       extrude_menu.title       = TITLE_EXTRUDE_CN;
       extrude_menu.in          = EXTRUDER_IN_TEXT_CN;
@@ -961,12 +941,9 @@ void disp_language_init() {
       filesys_menu.sd_sys  = SD_CARD_TEXT_CN;
       filesys_menu.usb_sys = U_DISK_TEXT_CN;
       //
-      more_menu.title   = TITLE_MORE_CN;
+      more_menu.title       = TITLE_MORE_CN;
       // WIFI
       wifi_menu.title = WIFI_TEXT;
-      // wifi_menu.key = WIFI_KEY_TEXT_CN;
-      // wifi_menu.ip = WIFI_IP_TEXT_CN;
-      // wifi_menu.state = WIFI_STA_TEXT_CN;
       wifi_menu.cloud     = CLOUD_TEXT_CN;
       wifi_menu.reconnect = WIFI_RECONNECT_TEXT_CN;
       // CLOUD
@@ -1055,11 +1032,10 @@ void disp_language_init() {
       printing_more_menu.speed      = PRINTING_CHANGESPEED_CN;
       printing_more_menu.temp       = PRINTING_TEMP_CN;
 
-      // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_CN;
       print_file_dialog_menu.confirm               = DIALOG_CONFIRM_CN;
-      print_file_dialog_menu.cancle                = DIALOG_CANCLE_CN;
+      print_file_dialog_menu.cancel                = DIALOG_CANCLE_CN;
       print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_CN;
-      print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_CN;
+      print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_CN;
       print_file_dialog_menu.retry                 = DIALOG_RETRY_CN;
       print_file_dialog_menu.stop                  = DIALOG_STOP_CN;
       print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_CN;
@@ -1153,7 +1129,7 @@ void disp_language_init() {
             file_menu.page_down         = PAGE_DOWN_TEXT_T_CN;
             file_menu.file_loading      = FILE_LOADING_T_CN;
             file_menu.no_file           = NO_FILE_T_CN;
-            file_menu.no_file_and_check = NO_FILE_T_CN;// NO_FILE_AND_CHECK_T_CN;
+            file_menu.no_file_and_check = NO_FILE_T_CN;
             //
             extrude_menu.title       = TITLE_EXTRUDE_T_CN;
             extrude_menu.in          = EXTRUDER_IN_TEXT_T_CN;
@@ -1190,12 +1166,9 @@ void disp_language_init() {
             filesys_menu.sd_sys   = SD_CARD_TEXT_T_CN;
             filesys_menu.usb_sys  = U_DISK_TEXT_T_CN;
             //
-            more_menu.title = TITLE_MORE_T_CN;
+            more_menu.title       = TITLE_MORE_T_CN;
             // WIFI
             wifi_menu.title = WIFI_TEXT;
-            // wifi_menu.key = WIFI_KEY_TEXT_CN;
-            // wifi_menu.ip = WIFI_IP_TEXT_CN;
-            // wifi_menu.state= WIFI_STA_TEXT_CN;
             wifi_menu.cloud     = CLOUD_TEXT_T_CN;
             wifi_menu.reconnect = WIFI_RECONNECT_TEXT_T_CN;
             // CLOUD
@@ -1233,7 +1206,6 @@ void disp_language_init() {
             filament_menu.filament_dialog_unloading           = FILAMENT_DIALOG_UNLOADING_TIPS_T_CN;
             filament_menu.filament_dialog_unload_completed    = FILAMENT_DIALOG_UNLOAD_COMPLETE_TIPS_T_CN;
 
-
             //
             language_menu.title = TITLE_LANGUAGE_T_CN;
             language_menu.next  = PAGE_DOWN_TEXT_T_CN;
@@ -1284,11 +1256,10 @@ void disp_language_init() {
             printing_more_menu.speed      = PRINTING_CHANGESPEED_T_CN;
             printing_more_menu.temp       = PRINTING_TEMP_T_CN;
 
-            // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_CN;
             print_file_dialog_menu.confirm               = DIALOG_CONFIRM_T_CN;
-            print_file_dialog_menu.cancle                = DIALOG_CANCLE_T_CN;
+            print_file_dialog_menu.cancel                = DIALOG_CANCLE_T_CN;
             print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_T_CN;
-            print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_T_CN;
+            print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_T_CN;
             print_file_dialog_menu.retry                 = DIALOG_RETRY_T_CN;
             print_file_dialog_menu.stop                  = DIALOG_STOP_T_CN;
             print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_T_CN;
@@ -1373,7 +1344,7 @@ void disp_language_init() {
             file_menu.page_down         = PAGE_DOWN_TEXT_EN;
             file_menu.file_loading      = FILE_LOADING_EN;
             file_menu.no_file           = NO_FILE_EN;
-            file_menu.no_file_and_check = NO_FILE_EN;// NO_FILE_AND_CHECK_EN;
+            file_menu.no_file_and_check = NO_FILE_EN;
             //
             extrude_menu.title       = TITLE_EXTRUDE_EN;
             extrude_menu.in          = EXTRUDER_IN_TEXT_EN;
@@ -1412,9 +1383,6 @@ void disp_language_init() {
             filesys_menu.usb_sys = U_DISK_TEXT_EN;
             // WIFI
             wifi_menu.title = WIFI_TEXT;
-            // wifi_menu.key = WIFI_KEY_TEXT_EN;
-            // wifi_menu.ip = WIFI_IP_TEXT_EN;
-            // wifi_menu.state = WIFI_STA_TEXT_EN;
             wifi_menu.cloud     = CLOUD_TEXT_EN;
             wifi_menu.reconnect = WIFI_RECONNECT_TEXT_EN;
 
@@ -1500,11 +1468,10 @@ void disp_language_init() {
             printing_more_menu.speed      = PRINTING_CHANGESPEED_EN;
             printing_more_menu.temp       = PRINTING_TEMP_EN;
 
-            // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_EN;
             print_file_dialog_menu.confirm               = DIALOG_CONFIRM_EN;
-            print_file_dialog_menu.cancle                = DIALOG_CANCLE_EN;
+            print_file_dialog_menu.cancel                = DIALOG_CANCLE_EN;
             print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_EN;
-            print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_EN;
+            print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_EN;
             print_file_dialog_menu.retry                 = DIALOG_RETRY_EN;
             print_file_dialog_menu.stop                  = DIALOG_STOP_EN;
             print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_EN;
@@ -1588,7 +1555,7 @@ void disp_language_init() {
             file_menu.page_down         = PAGE_DOWN_TEXT_RU;
             file_menu.file_loading      = FILE_LOADING_RU;
             file_menu.no_file           = NO_FILE_RU;
-            file_menu.no_file_and_check = NO_FILE_RU;// NO_FILE_AND_CHECK_RU;
+            file_menu.no_file_and_check = NO_FILE_RU;
             //
             extrude_menu.title       = TITLE_EXTRUDE_RU;
             extrude_menu.in          = EXTRUDER_IN_TEXT_RU;
@@ -1627,13 +1594,9 @@ void disp_language_init() {
             filesys_menu.usb_sys = U_DISK_TEXT_RU;
             // WIFI
             wifi_menu.title = WIFI_TEXT;
-            // wifi_menu.key = WIFI_KEY_TEXT_RU;
-            // wifi_menu.ip = WIFI_IP_TEXT_RU;
-            // wifi_menu.state = WIFI_STA_TEXT_RU;
             wifi_menu.cloud     = CLOUD_TEXT_RU;
             wifi_menu.reconnect = WIFI_RECONNECT_TEXT_RU;
 
-
             cloud_menu.title        = TITLE_CLOUD_TEXT_RU;
             cloud_menu.bind         = CLOUD_BINDED_RU;
             cloud_menu.binded       = CLOUD_BINDED_RU;
@@ -1715,11 +1678,10 @@ void disp_language_init() {
             printing_more_menu.manual     = MANUAL_SHUTDOWN_RU;
             printing_more_menu.speed      = PRINTING_CHANGESPEED_RU;
             printing_more_menu.temp       = PRINTING_TEMP_RU;
-            // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_RU;
             print_file_dialog_menu.confirm               = DIALOG_CONFIRM_RU;
-            print_file_dialog_menu.cancle                = DIALOG_CANCLE_RU;
+            print_file_dialog_menu.cancel                = DIALOG_CANCLE_RU;
             print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_RU;
-            print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_RU;
+            print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_RU;
             print_file_dialog_menu.retry                 = DIALOG_RETRY_RU;
             print_file_dialog_menu.stop                  = DIALOG_STOP_RU;
             print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_RU;
@@ -1807,7 +1769,7 @@ void disp_language_init() {
             file_menu.page_down         = PAGE_DOWN_TEXT_SP;
             file_menu.file_loading      = FILE_LOADING_SP;
             file_menu.no_file           = NO_FILE_SP;
-            file_menu.no_file_and_check = NO_FILE_SP;// NO_FILE_AND_CHECK_SP;
+            file_menu.no_file_and_check = NO_FILE_SP;
             //
             extrude_menu.title       = TITLE_EXTRUDE_SP;
             extrude_menu.in          = EXTRUDER_IN_TEXT_SP;
@@ -1847,9 +1809,6 @@ void disp_language_init() {
 
             // WIFI
             wifi_menu.title = WIFI_TEXT;
-            // wifi_menu.key = WIFI_KEY_TEXT_SP;
-            // wifi_menu.ip = WIFI_IP_TEXT_SP;
-            // wifi_menu.state = WIFI_STA_TEXT_SP;
             wifi_menu.cloud     = CLOUD_TEXT_SP;
             wifi_menu.reconnect = WIFI_RECONNECT_TEXT_SP;
 
@@ -1935,11 +1894,10 @@ void disp_language_init() {
             printing_more_menu.speed      = PRINTING_CHANGESPEED_SP;
             printing_more_menu.temp       = PRINTING_TEMP_SP;
 
-            // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_SP;
             print_file_dialog_menu.confirm               = DIALOG_CONFIRM_SP;
-            print_file_dialog_menu.cancle                = DIALOG_CANCLE_SP;
+            print_file_dialog_menu.cancel                = DIALOG_CANCLE_SP;
             print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_SP;
-            print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_SP;
+            print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_SP;
             print_file_dialog_menu.retry                 = DIALOG_RETRY_SP;
             print_file_dialog_menu.stop                  = DIALOG_STOP_SP;
             print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_SP;
@@ -2063,13 +2021,9 @@ void disp_language_init() {
           filesys_menu.usb_sys        = U_DISK_TEXT_FR;
           file_menu.file_loading      = FILE_LOADING_FR;
           file_menu.no_file           = NO_FILE_FR;
-          file_menu.no_file_and_check = NO_FILE_FR;// NO_FILE_AND_CHECK_FR;
+          file_menu.no_file_and_check = NO_FILE_FR;
           // WIFI
           wifi_menu.title = WIFI_NAME_TEXT_FR;
-          // wifi_menu.key = WIFI_KEY_TEXT_FR;
-          // wifi_menu.ip = WIFI_IP_TEXT_FR;
-          // wifi_menu.state = WIFI_STA_TEXT_FR;
-          // wifi_menu.cloud = CLOSE_TEXT_FR;
           wifi_menu.cloud     = CLOUD_TEXT_FR;
           wifi_menu.reconnect = WIFI_RECONNECT_TEXT_FR;
 
@@ -2153,11 +2107,10 @@ void disp_language_init() {
           printing_more_menu.speed      = PRINTING_CHANGESPEED_FR;
           printing_more_menu.temp       = PRINTING_TEMP_FR;
 
-          // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_SP;
           print_file_dialog_menu.confirm               = DIALOG_CONFIRM_FR;
-          print_file_dialog_menu.cancle                = DIALOG_CANCLE_FR;
+          print_file_dialog_menu.cancel                = DIALOG_CANCLE_FR;
           print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_FR;
-          print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_FR;
+          print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_FR;
           print_file_dialog_menu.retry                 = DIALOG_RETRY_FR;
           print_file_dialog_menu.stop                  = DIALOG_STOP_FR;
           print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_FR;
@@ -2243,7 +2196,7 @@ void disp_language_init() {
           file_menu.page_down         = PAGE_DOWN_TEXT_IT;
           file_menu.file_loading      = FILE_LOADING_IT;
           file_menu.no_file           = NO_FILE_IT;
-          file_menu.no_file_and_check = NO_FILE_IT;// NO_FILE_AND_CHECK_IT;
+          file_menu.no_file_and_check = NO_FILE_IT;
           //
           extrude_menu.title       = TITLE_EXTRUDE_IT;
           extrude_menu.in          = EXTRUDER_IN_TEXT_IT;
@@ -2283,9 +2236,6 @@ void disp_language_init() {
 
           // WIFI
           wifi_menu.title = WIFI_NAME_TEXT_IT;
-          // wifi_menu.key = WIFI_KEY_TEXT_IT;
-          // wifi_menu.ip = WIFI_IP_TEXT_IT;
-          // wifi_menu.state = WIFI_STA_TEXT_IT;
           wifi_menu.cloud     = CLOSE_TEXT_IT;
           wifi_menu.reconnect = WIFI_RECONNECT_TEXT_IT;
 
@@ -2369,11 +2319,10 @@ void disp_language_init() {
           printing_more_menu.temp       = PRINTING_TEMP_IT;
           printing_more_menu.speed      = PRINTING_CHANGESPEED_IT;
 
-          // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_SP;
           print_file_dialog_menu.confirm               = DIALOG_CONFIRM_IT;
-          print_file_dialog_menu.cancle                = DIALOG_CANCLE_IT;
+          print_file_dialog_menu.cancel                = DIALOG_CANCLE_IT;
           print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_IT;
-          print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_IT;
+          print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_IT;
           print_file_dialog_menu.retry                 = DIALOG_RETRY_IT;
           print_file_dialog_menu.stop                  = DIALOG_STOP_IT;
           print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_IT;
@@ -2460,7 +2409,7 @@ void disp_language_init() {
       file_menu.page_down         = PAGE_DOWN_TEXT_EN;
       file_menu.file_loading      = FILE_LOADING_EN;
       file_menu.no_file           = NO_FILE_EN;
-      file_menu.no_file_and_check = NO_FILE_EN;// NO_FILE_AND_CHECK_EN;
+      file_menu.no_file_and_check = NO_FILE_EN;
       //
       extrude_menu.title       = TITLE_EXTRUDE_EN;
       extrude_menu.in          = EXTRUDER_IN_TEXT_EN;
@@ -2493,16 +2442,13 @@ void disp_language_init() {
       set_menu.machine_para = MACHINE_PARA_EN;
       set_menu.eepromSet    = EEPROM_SETTINGS_EN;
       //
-      more_menu.title   = TITLE_MORE_EN;
+      more_menu.title       = TITLE_MORE_EN;
       //
       filesys_menu.title   = TITLE_FILESYS_EN;
       filesys_menu.sd_sys  = SD_CARD_TEXT_EN;
       filesys_menu.usb_sys = U_DISK_TEXT_EN;
       // WIFI
       wifi_menu.title = WIFI_TEXT;
-      // wifi_menu.key = WIFI_KEY_TEXT_EN;
-      // wifi_menu.ip = WIFI_IP_TEXT_EN;
-      // wifi_menu.state = WIFI_STA_TEXT_EN;
       wifi_menu.cloud     = CLOUD_TEXT_EN;
       wifi_menu.reconnect = WIFI_RECONNECT_TEXT_EN;
 
@@ -2588,11 +2534,10 @@ void disp_language_init() {
       printing_more_menu.speed      = PRINTING_CHANGESPEED_EN;
       printing_more_menu.temp       = PRINTING_TEMP_EN;
 
-      // print_file_dialog_menu.title = TITLE_DIALOG_CONFIRM_EN;
       print_file_dialog_menu.confirm               = DIALOG_CONFIRM_EN;
-      print_file_dialog_menu.cancle                = DIALOG_CANCLE_EN;
+      print_file_dialog_menu.cancel                = DIALOG_CANCLE_EN;
       print_file_dialog_menu.print_file            = DIALOG_PRINT_MODEL_EN;
-      print_file_dialog_menu.cancle_print          = DIALOG_CANCEL_PRINT_EN;
+      print_file_dialog_menu.cancel_print          = DIALOG_CANCEL_PRINT_EN;
       print_file_dialog_menu.retry                 = DIALOG_RETRY_EN;
       print_file_dialog_menu.stop                  = DIALOG_STOP_EN;
       print_file_dialog_menu.no_file_print_tips    = DIALOG_ERROR_TIPS1_EN;

Marlin/src/lcd/extui/lib/mks_ui/tft_multi_language.h

@@ -131,10 +131,6 @@ typedef struct machine_common_disp{
   const char *CalibrationRadius;
 
   const char *LevelingSubXYZConfTitle;
-  //const char *Level_positon1;
-  //const char *Level_positon2;
-  //const char *Level_positon3;
-  //const char *Level_positon4;
 
   const char *TemperatureConfTitle;
   const char *NozzleConf;
@@ -667,9 +663,9 @@ extern dialog_menu_def dialog_menu;
 typedef struct print_file_dialog_disp {
   const char *title;
   const char *confirm;
-  const char *cancle;
+  const char *cancel;
   const char *print_file;
-  const char *cancle_print;
+  const char *cancel_print;
   const char *retry;
   const char *stop;
   const char *no_file_print_tips;
@@ -740,12 +736,8 @@ typedef struct eeprom_disp{
 
 extern eeprom_def eeprom_menu;
 /*****************************************/
-//********************************************//
-//#if defined(TFT70)
 //
-//#elif defined(TFT35)
 #define TEXT_VALUE          "%d/%d"
-//#endif
 
 #define TEXT_VALUE_T        ": %d℃"
 #define TEXT_VALUE_mm       ": %dmm"
@@ -796,19 +788,14 @@ extern eeprom_def eeprom_menu;
 #define HOME_Y_TEXT         "Y"
 #define HOME_Z_TEXT         "Z"
 #define HOME_ALL_TEXT       "All"
-//#if defined(MKS_ROBIN_NANO)
+
 #define ABOUT_TYPE_TEXT     "MKS Robin Pro"
-//#elif defined(MKS_ROBIN_MINI)
-//#define ABOUT_TYPE_TEXT       "MKS Robin Mini"
-//#endif
+
 #define ABOUT_VERSION_TEXT  "1.0.0"
-//#define ABOUT_WIFI_TEXT   "WiFi:"
 
 #define FAN_OPEN_TEXT       "100%"
 #define FAN_HALF_TEXT       "50%"
 #define FAN_CLOSE_TEXT      "0%"
-//#define FAN_TIPS1_TEXT      "FAN"
-//#define FAN_TIPS2_TEXT      "FAN\nClose"
 
 #define WIFI_TEXT                       "WIFI"
 #define WIFI_IP_TEXT                    "IP: "
@@ -830,7 +817,7 @@ extern eeprom_def eeprom_menu;
 #define DIALOG_UPLOAD_SPEED_EN          "Speed"
 #define DIALOG_UPDATE_WIFI_FIRMWARE_EN  "Updating wifi model firmware"
 #define DIALOG_UPDATE_WIFI_WEB_EN       "Updating wifi model web data"
-#define DIALOG_UPDATE_NO_DEVICE_EN      "please check \nwether memory device insert!"
+#define DIALOG_UPDATE_NO_DEVICE_EN      "Please check whether\nmemory device inserted!"
 
 #define ZOFFSET_STEP001                 "0.01mm"
 #define ZOFFSET_STEP01                  "0.1mm"

Marlin/src/lcd/extui/lib/mks_ui/wifiSerial.h

@@ -26,7 +26,7 @@
 #if ENABLED(MKS_WIFI_MODULE)
 
 #ifdef SERIAL_PORT_2
-  #error "SERIAL_PORT_2 must be disabled with HAS_TFT_LVGL_UI and MKS_WIFI_MODULE."
+  #error "SERIAL_PORT_2 must be disabled with TFT_LVGL_UI* and MKS_WIFI_MODULE."
 #endif
 
 #define WIFI_BAUDRATE          115200

Marlin/src/lcd/extui/lib/mks_ui/wifi_module.cpp

@@ -110,8 +110,6 @@ extern CLOUD_PARA cloud_para;
 
 extern bool once_flag, flash_preview_begin, default_preview_flg, gcode_preview_over;
 
-extern uint8_t bmp_public_buf[17 * 1024];
-
 uint32_t getWifiTick() {
   return millis();
 }
@@ -126,8 +124,10 @@ uint32_t getWifiTickDiff(int32_t lastTick, int32_t curTick) {
 void wifi_delay(int n) {
   uint32_t begin = getWifiTick();
   uint32_t end = begin;
-  while (getWifiTickDiff(begin, end) < (uint32_t)n)
+  while (getWifiTickDiff(begin, end) < (uint32_t)n) {
+    watchdog_refresh();
     end = getWifiTick();
+  }
 }
 
 void wifi_reset() {
@@ -304,7 +304,7 @@ void esp_port_begin(uint8_t interrupt) {
 
 #if ENABLED(MKS_WIFI_MODULE)
 
-  int raw_send_to_wifi(char *buf, int len) {
+  int raw_send_to_wifi(uint8_t *buf, int len) {
     if (buf == 0 || len <= 0) return 0;
     for (int i = 0; i < len; i++)
       WIFISERIAL.write(*(buf + i));
@@ -315,11 +315,11 @@ void esp_port_begin(uint8_t interrupt) {
 
 void wifi_ret_ack() {}
 
-char buf_to_wifi[256];
+uint8_t buf_to_wifi[256];
 int index_to_wifi = 0;
-int package_to_wifi(WIFI_RET_TYPE type,char *buf, int len) {
-  char wifi_ret_head = 0xA5;
-  char wifi_ret_tail = 0xFC;
+int package_to_wifi(WIFI_RET_TYPE type, uint8_t *buf, int len) {
+  uint8_t wifi_ret_head = 0xA5;
+  uint8_t wifi_ret_tail = 0xFC;
 
   if (type == WIFI_PARA_SET) {
     int data_offset = 4;
@@ -331,9 +331,9 @@ int package_to_wifi(WIFI_RET_TYPE type,char *buf, int len) {
 
     buf_to_wifi[data_offset] = gCfgItems.wifi_mode_sel;
     buf_to_wifi[data_offset + 1]  = apLen;
-    strncpy(&buf_to_wifi[data_offset + 2], (const char *)uiCfg.wifi_name, apLen);
+    memcpy(&buf_to_wifi[data_offset + 2], (const char *)uiCfg.wifi_name, apLen);
     buf_to_wifi[data_offset + apLen + 2]  = keyLen;
-    strncpy(&buf_to_wifi[data_offset + apLen + 3], (const char *)uiCfg.wifi_key, keyLen);
+    memcpy(&buf_to_wifi[data_offset + apLen + 3], (const char *)uiCfg.wifi_key, keyLen);
     buf_to_wifi[data_offset + apLen + keyLen + 3] = wifi_ret_tail;
 
     index_to_wifi = apLen + keyLen + 3;
@@ -410,7 +410,7 @@ int package_to_wifi(WIFI_RET_TYPE type,char *buf, int len) {
 
     buf_to_wifi[data_offset] = gCfgItems.cloud_enable ? 0x0A : 0x05;
     buf_to_wifi[data_offset + 1]  = urlLen;
-    strncpy(&buf_to_wifi[data_offset + 2], (const char *)uiCfg.cloud_hostUrl, urlLen);
+    memcpy(&buf_to_wifi[data_offset + 2], (const char *)uiCfg.cloud_hostUrl, urlLen);
     buf_to_wifi[data_offset + urlLen + 2] = uiCfg.cloud_port & 0xFF;
     buf_to_wifi[data_offset + urlLen + 3] = (uiCfg.cloud_port >> 8) & 0xFF;
     buf_to_wifi[data_offset + urlLen + 4] = wifi_ret_tail;
@@ -555,7 +555,7 @@ uint8_t Explore_Disk(char* path , uint8_t recu_level) {
       strcat(Fstream, ".DIR");
 
     strcat(Fstream, "\r\n");
-    send_to_wifi(Fstream, strlen(Fstream));
+    send_to_wifi((uint8_t*)Fstream, strlen(Fstream));
   }
 
   return fileCnt;
@@ -589,7 +589,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
 
             if (tmpStr == 0) {
               gCfgItems.fileSysType = FILE_SYS_SD;
-              send_to_wifi((char *)"Begin file list\r\n", strlen("Begin file list\r\n"));
+              send_to_wifi((uint8_t *)"Begin file list\r\n", strlen("Begin file list\r\n"));
               get_file_list((char *)"0:/");
               send_to_wifi((char *)"End file list\r\n", strlen("End file list\r\n"));
               send_to_wifi((char *)"ok\r\n", strlen("ok\r\n"));
@@ -602,7 +602,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
               char *path = (char *)tempBuf;
 
               if (strlen((char *)&tmpStr[index]) < 80) {
-                send_to_wifi((char *)"Begin file list\r\n", strlen("Begin file list\r\n"));
+                send_to_wifi((uint8_t *)"Begin file list\r\n", strlen("Begin file list\r\n"));
 
                 if (strncmp((char *)&tmpStr[index], "1:", 2) == 0)
                   gCfgItems.fileSysType = FILE_SYS_SD;
@@ -611,7 +611,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
 
                 strcpy((char *)path, (char *)&tmpStr[index]);
                 get_file_list(path);
-                send_to_wifi((char *)"End file list\r\n", strlen("End file list\r\n"));
+                send_to_wifi((uint8_t *)"End file list\r\n", strlen("End file list\r\n"));
               }
               send_to_wifi((char *)"ok\r\n", strlen("ok\r\n"));
             }
@@ -651,9 +651,9 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
                 card.openFileRead(cur_name);
 
                 if (card.isFileOpen())
-                  send_to_wifi((char *)"File selected\r\n", strlen("File selected\r\n"));
+                  send_to_wifi((uint8_t *)"File selected\r\n", strlen("File selected\r\n"));
                 else {
-                  send_to_wifi((char *)"file.open failed\r\n", strlen("file.open failed\r\n"));
+                  send_to_wifi((uint8_t *)"file.open failed\r\n", strlen("file.open failed\r\n"));
                   strcpy(list_file.file_name[sel_id], "notValid");
                 }
                 send_to_wifi((char *)"ok\r\n", strlen("ok\r\n"));
@@ -772,7 +772,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
             print_rate = uiCfg.totalSend;
             ZERO(tempBuf);
             sprintf((char *)tempBuf, "M27 %d\r\n", print_rate);
-            send_to_wifi((char *)tempBuf, strlen((char *)tempBuf));
+            send_to_wifi((uint8_t *)tempBuf, strlen((char *)tempBuf));
           }
           break;
 
@@ -857,7 +857,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
             );
           }
 
-          send_to_wifi((char *)tempBuf, strlen((char *)tempBuf));
+          send_to_wifi((uint8_t *)tempBuf, strlen((char *)tempBuf));
           queue.enqueue_one_P(PSTR("M105"));
           break;
 
@@ -866,7 +866,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
             ZERO(tempBuf);
             sprintf((char *)tempBuf, "M992 %d%d:%d%d:%d%d\r\n", print_time.hours/10, print_time.hours%10, print_time.minutes/10, print_time.minutes%10, print_time.seconds/10, print_time.seconds%10);
             wifi_ret_ack();
-            send_to_wifi((char *)tempBuf, strlen((char *)tempBuf));
+            send_to_wifi((uint8_t *)tempBuf, strlen((char *)tempBuf));
           }
           break;
 
@@ -876,18 +876,18 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
             if (strlen((char *)list_file.file_name[sel_id]) > (100 - 1)) return;
             sprintf((char *)tempBuf, "M994 %s;%d\n", list_file.file_name[sel_id],(int)gCfgItems.curFilesize);
             wifi_ret_ack();
-            send_to_wifi((char *)tempBuf, strlen((char *)tempBuf));
+            send_to_wifi((uint8_t *)tempBuf, strlen((char *)tempBuf));
           }
           break;
 
         case 997:
           if (uiCfg.print_state == IDLE) {
             wifi_ret_ack();
-            send_to_wifi((char *)"M997 IDLE\r\n", strlen("M997 IDLE\r\n"));
+            send_to_wifi((uint8_t *)"M997 IDLE\r\n", strlen("M997 IDLE\r\n"));
           }
           else if (uiCfg.print_state == WORKING) {
             wifi_ret_ack();
-            send_to_wifi((char *)"M997 PRINTING\r\n", strlen("M997 PRINTING\r\n"));
+            send_to_wifi((uint8_t *)"M997 PRINTING\r\n", strlen("M997 PRINTING\r\n"));
           }
           else if (uiCfg.print_state == PAUSED) {
             wifi_ret_ack();
@@ -895,7 +895,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) {
           }
           else if (uiCfg.print_state == REPRINTING) {
             wifi_ret_ack();
-            send_to_wifi((char *)"M997 PAUSE\r\n", strlen("M997 PAUSE\r\n"));
+            send_to_wifi((uint8_t *)"M997 PAUSE\r\n", strlen("M997 PAUSE\r\n"));
           }
           if (uiCfg.command_send == 0) get_wifi_list_command_send();
           break;
@@ -977,8 +977,8 @@ static int32_t charAtArray(const uint8_t *_array, uint32_t _arrayLen, uint8_t _c
 }
 
 void get_wifi_list_command_send() {
-  char buf[] = { 0xA5, 0x07, 0x00, 0x00, 0xFC };
-  raw_send_to_wifi(buf, 5);
+  uint8_t cmd_wifi_list[] = { 0xA5, 0x07, 0x00, 0x00, 0xFC };
+  raw_send_to_wifi(cmd_wifi_list, COUNT(cmd_wifi_list));
 }
 
 static void net_msg_handle(uint8_t * msg, uint16_t msgLen) {
@@ -1043,7 +1043,7 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) {
     if ((wifiPara.mode != gCfgItems.wifi_mode_sel)
       || (strncmp(wifiPara.ap_name, (const char *)uiCfg.wifi_name, 32) != 0)
       || (strncmp(wifiPara.keyCode, (const char *)uiCfg.wifi_key, 64) != 0)) {
-      package_to_wifi(WIFI_PARA_SET, (char *)0, 0);
+      package_to_wifi(WIFI_PARA_SET, (uint8_t *)0, 0);
     }
     else uiCfg.configWifi = 0;
   }
@@ -1051,7 +1051,7 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) {
     if (((cloud_para.state >> 4) != (char)gCfgItems.cloud_enable)
       || (strncmp(cloud_para.hostUrl, (const char *)uiCfg.cloud_hostUrl, 96) != 0)
       || (cloud_para.port != uiCfg.cloud_port)) {
-      package_to_wifi(WIFI_CLOUD_CFG, (char *)0, 0);
+      package_to_wifi(WIFI_CLOUD_CFG, (uint8_t *)0, 0);
     }
     else cfg_cloud_flag = 0;
   }
@@ -1091,17 +1091,13 @@ static void wifi_list_msg_handle(uint8_t * msg, uint16_t msgLen) {
           }
         }
         if (wifi_name_is_same != 1) {
-          //for (j=0;j<wifiNameLen;j++) {
             if (str[0] > 0x80) {
               wifi_name_is_same = 1;
-              //break;
             }
-          //}
         }
         if (wifi_name_is_same == 1) {
           wifi_name_is_same = 0;
           wifiMsgIdex  +=  wifiNameLen;
-          //wifi_list.RSSI[i] = msg[wifiMsgIdex];
           wifiMsgIdex  +=  1;
           wifi_name_num--;
           //i--;

Marlin/src/lcd/extui/lib/mks_ui/wifi_module.h

@@ -170,10 +170,10 @@ typedef struct {
 #define WIFI_GCODE_BUFFER_LEAST_SIZE    96
 #define WIFI_GCODE_BUFFER_SIZE  (WIFI_GCODE_BUFFER_LEAST_SIZE * 3)
 typedef struct {
-    uint8_t wait_tick;
-    uint8_t Buffer[WIFI_GCODE_BUFFER_SIZE];
-    uint32_t r;
-    uint32_t w;
+  uint8_t wait_tick;
+  uint8_t Buffer[WIFI_GCODE_BUFFER_SIZE];
+  uint32_t r;
+  uint32_t w;
 } WIFI_GCODE_BUFFER;
 
 extern volatile WIFI_STATE wifi_link_state;
@@ -184,14 +184,14 @@ extern CLOUD_PARA cloud_para;
 extern WIFI_GCODE_BUFFER espGcodeFifo;
 
 extern uint32_t  getWifiTick();
-extern uint32_t  getWifiTickDiff(int32_t lastTick, int32_t  curTick);
+extern uint32_t  getWifiTickDiff(int32_t lastTick, int32_t curTick);
 
 extern void mks_esp_wifi_init();
 extern int  cfg_cloud_flag;
-extern int  send_to_wifi(char *buf, int len);
+extern int  send_to_wifi(uint8_t *buf, int len);
 extern void wifi_looping();
-extern int  raw_send_to_wifi(char *buf, int len);
-extern int  package_to_wifi(WIFI_RET_TYPE type,char *buf, int len);
+extern int  raw_send_to_wifi(uint8_t *buf, int len);
+extern int  package_to_wifi(WIFI_RET_TYPE type, uint8_t *buf, int len);
 extern void get_wifi_list_command_send();
 extern void get_wifi_commands();
 extern int  readWifiBuf(int8_t *buf, int32_t len);

Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.cpp

@@ -75,7 +75,6 @@ const uint32_t ESP_UNKNOWN_ADDR = 0x40001121;   // not used
 const uint32_t ESP_USER_DATA_RAM_ADDR = 0x3FFE8000; // &user data ram
 const uint32_t ESP_IRAM_ADDR = 0x40100000;      // instruction RAM
 const uint32_t ESP_FLASH_ADDR = 0x40200000;     // address of start of Flash
-//const uint32_t ESP_FLASH_READ_STUB_BEGIN = IRAM_ADDR + 0x18;
 
 UPLOAD_STRUCT esp_upload;
 
@@ -316,15 +315,11 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
         }
         state = header;
         needBytes = 2;
-
         break;
       case end:   // expecting frame end
         c = uploadPort_read();
-        if (c != (uint8_t)0xC0) {
-          return slipFrame;
-        }
+        if (c != (uint8_t)0xC0) return slipFrame;
         state = done;
-
         break;
 
       case header:  // reading an 8-byte header
@@ -373,8 +368,7 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
         }
         break;
 
-      default:    // this shouldn't happen
-        return slipState;
+      default: return slipState;  // this shouldn't happen
     }
   }
 
@@ -383,7 +377,6 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t
   opRet = (uint8_t)getData(1, hdr, 1);
   // Sync packets often provoke a response with a zero opcode instead of ESP_SYNC
   if (resp != 0x01 || opRet != op) {
-    //printf("resp %02x %02x\n", resp, opRet); //debug
     return respHeader;
   }
 
@@ -405,7 +398,6 @@ void _writePacket(const uint8_t *data, size_t len) {
     }
     else {
       outBuf[outIndex++] = *data;
-
     }
     data++;
     --len;
@@ -444,7 +436,6 @@ void sendCommand(uint8_t op, uint32_t checkVal, const uint8_t *data, size_t data
   putData(checkVal, 4, hdr, 4);
 
   // send the packet
-  //flushInput();
   if (op == ESP_SYNC)
     writePacketRaw(hdr, sizeof(hdr), data, dataLen);
   else
@@ -492,9 +483,7 @@ EspUploadResult Sync(uint16_t timeout) {
     for (;;) {
       size_t bodyLen;
       EspUploadResult rc = readPacket(ESP_SYNC, 0, &bodyLen, defaultTimeout);
-      if (rc != success || bodyLen != 2) {
-        break;
-      }
+      if (rc != success || bodyLen != 2) break;
     }
   }
   //DEBUG
@@ -580,14 +569,9 @@ EspUploadResult flashWriteBlock(uint16_t flashParmVal, uint16_t flashParmMask) {
   // Calculate the block checksum
   cksum = checksum(blkBuf + dataOfst, blkSize, ESP_CHECKSUM_MAGIC);
 
-  for (i = 0; i < 3; i++) {
-    if ((stat = doCommand(ESP_FLASH_DATA, blkBuf, blkBufSize, cksum, 0, blockWriteTimeout)) == success) {
+  for (i = 0; i < 3; i++)
+    if ((stat = doCommand(ESP_FLASH_DATA, blkBuf, blkBufSize, cksum, 0, blockWriteTimeout)) == success)
       break;
-    }
-  }
-
-  //printf("Upload %d\%\n", ftell(&esp_upload.uploadFile) * 100 / esp_upload.fileSize);
-
   return stat;
   #else
     return success;
@@ -720,8 +704,7 @@ void upload_spin() {
     esp_upload.state = upload_idle;//idle;
     break;
 
-  default:
-    break;
+    default: break;
   }
   #endif
 }

Marlin/src/lcd/extui/lib/mks_ui/wifi_upload.h

@@ -52,7 +52,6 @@ typedef enum {
 } EspUploadResult;
 
 typedef struct {
-  //FIL  uploadFile;
   uint32_t fileSize;
 
   uint32_t uploadAddress;