thomas
/
marlin
Watch 1
Star 0
Fork 0
Code Issues 0 Pull Requests 0 Releases 0 Wiki Activity
Browse Source

✨ FYSETC SPIDER KING407 (#24696)

George Fu 1 year ago
parent
3c449b220f
commit
50f79823d2
No account linked to committer's email address
8 changed files with 1115 additions and 0 deletions
Split View Show Diff Stats
  1. 1
    0
      Marlin/src/core/boards.h
  2. 2
    0
      Marlin/src/pins/pins.h
  3. 399
    0
      buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c
  4. 50
    0
      buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PinNamesVar.h
  5. 204
    0
      buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/ldscript.ld
  6. 212
    0
      buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/variant.cpp
  7. 237
    0
      buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/variant.h
  8. 10
    0
      ini/stm32f4.ini

+ 1
- 0
Marlin/src/core/boards.h View File 

@@ -423,6 +423,7 @@
423 423 
 #define BOARD_FYSETC_SPIDER_V2_2      4239  // FYSETC Spider V2.2 (STM32F446VE)
424 424 
 #define BOARD_CREALITY_V24S1_301F4    4240  // Creality v2.4.S1_301F4 (STM32F401RC) as found in the Ender-3 S1 F4
425 425 
 #define BOARD_OPULO_LUMEN_REV4        4241  // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
426 
+#define BOARD_FYSETC_SPIDER_KING407   4242  // FYSETC Spider King407 (STM32F407ZG)
426 427
427 428 
 //
428 429 
 // ARM Cortex M7

+ 2
- 0
Marlin/src/pins/pins.h View File 

@@ -705,6 +705,8 @@
705 705 
   #include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4                               env:STM32F401RC_creality env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
706 706 
 #elif MB(OPULO_LUMEN_REV4)
707 707 
   #include "stm32f4/pins_OPULO_LUMEN_REV4.h"    // STM32F4                                env:Opulo_Lumen_REV4
708 
+#elif MB(FYSETC_SPIDER_KING407)
709 
+  #include "stm32f4/pins_FYSETC_SPIDER_KING407.h" // STM32F4                              env:FYSETC_SPIDER_KING407
708 710
709 711 
 //
710 712 
 // ARM Cortex M7

+ 399
- 0
buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c View File 

@@ -0,0 +1,399 @@
1 
+/*
2 
+ *******************************************************************************
3 
+ * Copyright (c) 2019, STMicroelectronics
4 
+ * All rights reserved.
5 
+ *
6 
+ * Redistribution and use in source and binary forms, with or without
7 
+ * modification, are permitted provided that the following conditions are met:
8 
+ *
9 
+ * 1. Redistributions of source code must retain the above copyright notice,
10 
+ *    this list of conditions and the following disclaimer.
11 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
12 
+ *    this list of conditions and the following disclaimer in the documentation
13 
+ *    and/or other materials provided with the distribution.
14 
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
15 
+ *    may be used to endorse or promote products derived from this software
16 
+ *    without specific prior written permission.
17 
+ *
18 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21 
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22 
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24 
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25 
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 
+ *******************************************************************************
29 
+ * Automatically generated from STM32F407Z(E-G)Tx.xml
30 
+ */
31 
+#include <Arduino.h>
32 
+#include <PeripheralPins.h>
33 
+
34 
+/* =====
35 
+ * Note: Commented lines are alternative possibilities which are not used per default.
36 
+ *       If you change them, you will have to know what you do
37 
+ * =====
38 
+ */
39 
+
40 
+//*** ADC ***
41 
+
42 
+#ifdef HAL_ADC_MODULE_ENABLED
43 
+WEAK const PinMap PinMap_ADC[] = {
44 
+  //{PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
45 
+  //{PA_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
46 
+  //{PA_0,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
47 
+  //{PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
48 
+  //{PA_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
49 
+  //{PA_1,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
50 
+  {PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2			LCD RX
51 
+  //{PA_2,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
52 
+  //{PA_2,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
53 
+  {PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3			LCD TX
54 
+  //{PA_3,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
55 
+  //{PA_3,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
56 
+  //{PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
57 
+  //{PA_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
58 
+  //{PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
59 
+  //{PA_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
60 
+  //{PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
61 
+  //{PA_6,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
62 
+  //{PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
63 
+  //{PA_7,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
64 
+  //{PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
65 
+  //{PB_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
66 
+  //{PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
67 
+  //{PB_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
68 
+  {PC_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
69 
+  //{PC_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
70 
+  //{PC_0,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
71 
+  {PC_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
72 
+  //{PC_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
73 
+  //{PC_1,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
74 
+  {PC_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
75 
+  //{PC_2,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
76 
+  //{PC_2,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
77 
+  {PC_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
78 
+  //{PC_3,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
79 
+  //{PC_3,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
80 
+  //{PC_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
81 
+  //{PC_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
82 
+  //{PC_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
83 
+  //{PC_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
84 
+  //{PF_3,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
85 
+  //{PF_4,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
86 
+  //{PF_5,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
87 
+  //{PF_6,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
88 
+  //{PF_7,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
89 
+  //{PF_8,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
90 
+  {PF_9,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
91 
+  {PF_10, ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
92 
+  {NC,    NP,    0}
93 
+};
94 
+#endif
95 
+
96 
+//*** DAC ***
97 
+
98 
+#ifdef HAL_DAC_MODULE_ENABLED
99 
+WEAK const PinMap PinMap_DAC[] = {
100 
+  //{PA_4,  DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
101 
+  //{PA_5,  DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
102 
+  {NC,    NP,    0}
103 
+};
104 
+#endif
105 
+
106 
+//*** I2C ***
107 
+
108 
+#ifdef HAL_I2C_MODULE_ENABLED
109 
+WEAK const PinMap PinMap_I2C_SDA[] = {
110 
+  {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
111 
+  {PB_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
112 
+  {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
113 
+  {PC_9,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
114 
+  {PF_0,  I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
115 
+  {NC,    NP,    0}
116 
+};
117 
+
118 
+WEAK const PinMap PinMap_I2C_SCL[] = {
119 
+  {PA_8,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
120 
+  {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
121 
+  {PB_8,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
122 
+  {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
123 
+  {PF_1,  I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
124 
+  {NC,    NP,    0}
125 
+};
126 
+#endif
127 
+
128 
+//*** PWM ***
129 
+
130 
+#ifdef HAL_TIM_MODULE_ENABLED
131 
+WEAK const PinMap PinMap_PWM[] = {
132 
+  //{PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
133 
+  //  {PA_0,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
134 
+  //  {PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
135 
+  //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
136 
+  //  {PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
137 
+  //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
138 
+  //  {PA_2,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
139 
+  //  {PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
140 
+  //{PA_3,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
141 
+  //  {PA_3,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
142 
+  //{PA_5,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
143 
+  //  {PA_5,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
144 
+  //  {PA_6,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
145 
+  //{PA_6,  TIM13,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
146 
+  //  {PA_7,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
147 
+  //  {PA_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
148 
+  //  {PA_7,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
149 
+  //{PA_7,  TIM14,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
150 
+  //{PA_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
151 
+  //{PA_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
152 
+  //{PA_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
153 
+  //{PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
154 
+  {PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1    HEATER_4_PIN
155 
+  //  {PB_0,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
156 
+  //  {PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
157 
+  {PB_0,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N   HEATER_1_PIN
158 
+  //  {PB_1,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
159 
+  //  {PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
160 
+  //{PB_1,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
161 
+  //{PB_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
162 
+  //{PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
163 
+  {PB_4,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1    HEATER_0_PIN
164 
+  //{PB_5,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
165 
+  //{PB_6,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
166 
+  //{PB_7,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
167 
+  //{PB_8,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
168 
+  //  {PB_8,  TIM10,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
169 
+  //  {PB_9,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
170 
+  //{PB_9,  TIM11,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
171 
+  //{PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
172 
+  //{PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
173 
+  //{PB_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
174 
+  //  {PB_14, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
175 
+  //  {PB_14, TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
176 
+  //{PB_14, TIM12,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
177 
+  //  {PB_15, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
178 
+  //  {PB_15, TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
179 
+  //{PB_15, TIM12,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
180 
+  //{PC_6,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
181 
+  //  {PC_6,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
182 
+  //  {PC_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
183 
+  //{PC_7,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
184 
+  //  {PC_8,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
185 
+  {PC_8,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3    HEATER_3_PIN
186 
+  //  {PC_9,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
187 
+  //{PC_9,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
188 
+  {PD_12, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1    FAN3
189 
+  {PD_13, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2    HEATER_2_PIN
190 
+  {PD_14, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3    FAN4
191 
+  {PD_15, TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4    FAN2_PIN
192 
+  //{PE_5,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
193 
+  //{PE_6,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
194 
+  {PE_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N   FAN_PIN
195 
+  {PE_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1    FAN1_PIN
196 
+  {PE_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N   HEATER_BED_PIN
197 
+  //{PE_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
198 
+  //{PE_12, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
199 
+  //{PE_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
200 
+  //{PE_14, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
201 
+  {NC,    NP,    0}
202 
+};
203 
+#endif
204 
+
205 
+//*** SERIAL ***
206 
+
207 
+#ifdef HAL_UART_MODULE_ENABLED
208 
+WEAK const PinMap PinMap_UART_TX[] = {
209 
+  //{PA_0,  UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
210 
+  {PA_2,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
211 
+  {PA_9,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
212 
+  //{PB_6,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
213 
+  //{PB_10, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
214 
+  //{PC_6,  USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
215 
+  //{PC_10, UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
216 
+  //{PC_10, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
217 
+  //{PC_12, UART5,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
218 
+  //{PD_5,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
219 
+  //{PD_8,  USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
220 
+  {NC,    NP,    0}
221 
+};
222 
+
223 
+WEAK const PinMap PinMap_UART_RX[] = {
224 
+  //{PA_1,  UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
225 
+  {PA_3,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
226 
+  {PA_10, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
227 
+  //{PB_7,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
228 
+  //{PB_11, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
229 
+  //{PC_7,  USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
230 
+  //  {PC_11, UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
231 
+  //{PC_11, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
232 
+  //{PD_2,  UART5,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
233 
+  //{PD_6,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
234 
+  //{PD_9,  USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
235 
+  {NC,    NP,    0}
236 
+};
237 
+
238 
+WEAK const PinMap PinMap_UART_RTS[] = {
239 
+  //{PA_1,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
240 
+  //{PA_12, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
241 
+  //{PB_14, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
242 
+  //{PD_4,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
243 
+  //{PD_12, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
244 
+  //{PG_8,  USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
245 
+  //{PG_12, USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
246 
+  {NC,    NP,    0}
247 
+};
248 
+
249 
+WEAK const PinMap PinMap_UART_CTS[] = {
250 
+  //{PA_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
251 
+  //{PA_11, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
252 
+  //{PB_13, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
253 
+  //{PD_3,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
254 
+  //{PD_11, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
255 
+  //{PG_13, USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
256 
+  //{PG_15, USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
257 
+  {NC,    NP,    0}
258 
+};
259 
+#endif
260 
+
261 
+//*** SPI ***
262 
+
263 
+#ifdef HAL_SPI_MODULE_ENABLED
264 
+WEAK const PinMap PinMap_SPI_MOSI[] = {
265 
+  {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
266 
+  //{PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
267 
+  //{PB_5,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
268 
+  {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
269 
+  //{PC_3,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
270 
+  //{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
271 
+  {NC,    NP,    0}
272 
+};
273 
+
274 
+WEAK const PinMap PinMap_SPI_MISO[] = {
275 
+  {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
276 
+  //{PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
277 
+  //{PB_4,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
278 
+  {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
279 
+  //{PC_2,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
280 
+  //{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
281 
+  {NC,    NP,    0}
282 
+};
283 
+
284 
+WEAK const PinMap PinMap_SPI_SCLK[] = {
285 
+  {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
286 
+  //{PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
287 
+  //{PB_3,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
288 
+  //{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
289 
+  {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
290 
+  //{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
291 
+  {NC,    NP,    0}
292 
+};
293 
+
294 
+WEAK const PinMap PinMap_SPI_SSEL[] = {
295 
+  {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
296 
+  //{PA_4,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
297 
+  //{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
298 
+  //{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
299 
+  //{PB_9,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
300 
+  {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
301 
+  {NC,    NP,    0}
302 
+};
303 
+#endif
304 
+
305 
+//*** CAN ***
306 
+
307 
+#ifdef HAL_CAN_MODULE_ENABLED
308 
+WEAK const PinMap PinMap_CAN_RD[] = {
309 
+  //{PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
310 
+  //{PB_5,  CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
311 
+  {PB_8,  CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
312 
+  //{PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
313 
+  //{PD_0,  CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
314 
+  {NC,    NP,    0}
315 
+};
316 
+
317 
+WEAK const PinMap PinMap_CAN_TD[] = {
318 
+  //{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
319 
+  //{PB_6,  CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
320 
+  {PB_9,  CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
321 
+  //{PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
322 
+  //{PD_1,  CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
323 
+  {NC,    NP,    0}
324 
+};
325 
+#endif
326 
+
327 
+//*** ETHERNET ***
328 
+
329 
+#ifdef HAL_ETH_MODULE_ENABLED
330 
+WEAK const PinMap PinMap_Ethernet[] = {
331 
+  /*
332 
+  {PA_0,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
333 
+  {PA_1,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
334 
+  {PA_2,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
335 
+  {PA_3,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
336 
+  {PA_7,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV
337 
+  {PB_0,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
338 
+  {PB_1,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
339 
+  {PB_5,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
340 
+  {PB_8,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
341 
+  {PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
342 
+  {PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
343 
+  {PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
344 
+  {PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
345 
+  {PC_1,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
346 
+  {PC_2,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
347 
+  {PC_3,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
348 
+  {PC_4,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
349 
+  {PC_5,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
350 
+  {PE_2,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
351 
+  {PG_8,  ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
352 
+  {PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
353 
+  {PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
354 
+  {PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
355 
+  {NC,    NP,    0}
356 
+  */
357 
+};
358 
+#endif
359 
+
360 
+//*** No QUADSPI ***
361 
+
362 
+//*** USB ***
363 
+
364 
+#ifdef HAL_PCD_MODULE_ENABLED
365 
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
366 
+  //{PA_8,  USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
367 
+  //{PA_9,  USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
368 
+  //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
369 
+  {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
370 
+  {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
371 
+  {NC,    NP,    0}
372 
+};
373 
+
374 
+WEAK const PinMap PinMap_USB_OTG_HS[] = {
375 
+  /*
376 
+  #ifdef USE_USB_HS_IN_FS
377 
+    {PA_4,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF
378 
+    {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
379 
+    {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
380 
+    {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
381 
+    {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
382 
+   #else
383 
+    {PA_3,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
384 
+    {PA_5,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK
385 
+    {PB_0,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
386 
+    {PB_1,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
387 
+    {PB_5,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
388 
+    {PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
389 
+    {PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4
390 
+    {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
391 
+    {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6
392 
+    {PC_0,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
393 
+    {PC_2,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR
394 
+    {PC_3,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT
395 
+  #endif // USE_USB_HS_IN_FS
396 
+  */
397 
+  {NC,    NP,    0}
398 
+};
399 
+#endif

+ 50
- 0
buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PinNamesVar.h View File 

@@ -0,0 +1,50 @@
1 
+/* SYS_WKUP */
2 
+#ifdef PWR_WAKEUP_PIN1
3 
+  SYS_WKUP1 = PA_0,
4 
+#endif
5 
+#ifdef PWR_WAKEUP_PIN2
6 
+  SYS_WKUP2 = NC,
7 
+#endif
8 
+#ifdef PWR_WAKEUP_PIN3
9 
+  SYS_WKUP3 = NC,
10 
+#endif
11 
+#ifdef PWR_WAKEUP_PIN4
12 
+  SYS_WKUP4 = NC,
13 
+#endif
14 
+#ifdef PWR_WAKEUP_PIN5
15 
+  SYS_WKUP5 = NC,
16 
+#endif
17 
+#ifdef PWR_WAKEUP_PIN6
18 
+  SYS_WKUP6 = NC,
19 
+#endif
20 
+#ifdef PWR_WAKEUP_PIN7
21 
+  SYS_WKUP7 = NC,
22 
+#endif
23 
+#ifdef PWR_WAKEUP_PIN8
24 
+  SYS_WKUP8 = NC,
25 
+#endif
26 
+/* USB */
27 
+#ifdef USBCON
28 
+  USB_OTG_FS_SOF      = PA_8,
29 
+  USB_OTG_FS_VBUS     = PA_9,
30 
+  USB_OTG_FS_ID       = PA_10,
31 
+  USB_OTG_FS_DM       = PA_11,
32 
+  USB_OTG_FS_DP       = PA_12,
33 
+  USB_OTG_HS_ULPI_D0  = PA_3,
34 
+  USB_OTG_HS_SOF      = PA_4,
35 
+  USB_OTG_HS_ULPI_CK  = PA_5,
36 
+  USB_OTG_HS_ULPI_D1  = PB_0,
37 
+  USB_OTG_HS_ULPI_D2  = PB_1,
38 
+  USB_OTG_HS_ULPI_D7  = PB_5,
39 
+  USB_OTG_HS_ULPI_D3  = PB_10,
40 
+  USB_OTG_HS_ULPI_D4  = PB_11,
41 
+  USB_OTG_HS_ID       = PB_12,
42 
+  USB_OTG_HS_ULPI_D5  = PB_12,
43 
+  USB_OTG_HS_ULPI_D6  = PB_13,
44 
+  USB_OTG_HS_VBUS     = PB_13,
45 
+  USB_OTG_HS_DM       = PB_14,
46 
+  USB_OTG_HS_DP       = PB_15,
47 
+  USB_OTG_HS_ULPI_STP = PC_0,
48 
+  USB_OTG_HS_ULPI_DIR = PC_2,
49 
+  USB_OTG_HS_ULPI_NXT = PC_3,
50 
+#endif

+ 204
- 0
buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/ldscript.ld View File 

@@ -0,0 +1,204 @@
1 
+/*
2 
+*****************************************************************************
3 
+**
4 
+
5 
+**  File        : LinkerScript.ld
6 
+**
7 
+**  Abstract    : Linker script for STM32F407ZGTx Device with
8 
+**                1024KByte FLASH, 128KByte RAM
9 
+**
10 
+**                Set heap size, stack size and stack location according
11 
+**                to application requirements.
12 
+**
13 
+**                Set memory bank area and size if external memory is used.
14 
+**
15 
+**  Target      : STMicroelectronics STM32
16 
+**
17 
+**
18 
+**  Distribution: The file is distributed as is, without any warranty
19 
+**                of any kind.
20 
+**
21 
+*****************************************************************************
22 
+** @attention
23 
+**
24 
+** <h2><center>&copy; COPYRIGHT(c) 2014 Ac6</center></h2>
25 
+**
26 
+** Redistribution and use in source and binary forms, with or without modification,
27 
+** are permitted provided that the following conditions are met:
28 
+**   1. Redistributions of source code must retain the above copyright notice,
29 
+**      this list of conditions and the following disclaimer.
30 
+**   2. Redistributions in binary form must reproduce the above copyright notice,
31 
+**      this list of conditions and the following disclaimer in the documentation
32 
+**      and/or other materials provided with the distribution.
33 
+**   3. Neither the name of Ac6 nor the names of its contributors
34 
+**      may be used to endorse or promote products derived from this software
35 
+**      without specific prior written permission.
36 
+**
37 
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
38 
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
39 
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
40 
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
41 
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
42 
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
43 
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
44 
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
45 
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
46 
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
47 
+**
48 
+*****************************************************************************
49 
+*/
50 
+
51 
+/* Entry Point */
52 
+ENTRY(Reset_Handler)
53 
+
54 
+/* Highest address of the user mode stack */
55 
+_estack = 0x20020000;    /* end of RAM */
56 
+/* Generate a link error if heap and stack don't fit into RAM */
57 
+_Min_Heap_Size = 0x200;;      /* required amount of heap  */
58 
+_Min_Stack_Size = 0x400;; /* required amount of stack */
59 
+
60 
+/* Specify the memory areas */
61 
+MEMORY
62 
+{
63 
+FLASH (rx)      : ORIGIN = 0x8008000, LENGTH = 1024K
64 
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 128K
65 
+CCMRAM (rw)      : ORIGIN = 0x10000000, LENGTH = 64K
66 
+}
67 
+
68 
+/* Define output sections */
69 
+SECTIONS
70 
+{
71 
+  /* The startup code goes first into FLASH */
72 
+  .isr_vector :
73 
+  {
74 
+    . = ALIGN(4);
75 
+    KEEP(*(.isr_vector)) /* Startup code */
76 
+    . = ALIGN(4);
77 
+  } >FLASH
78 
+
79 
+  /* The program code and other data goes into FLASH */
80 
+  .text ALIGN(4):
81 
+  {
82 
+    . = ALIGN(4);
83 
+    *(.text)           /* .text sections (code) */
84 
+    *(.text*)          /* .text* sections (code) */
85 
+    *(.glue_7)         /* glue arm to thumb code */
86 
+    *(.glue_7t)        /* glue thumb to arm code */
87 
+    *(.eh_frame)
88 
+
89 
+    KEEP (*(.init))
90 
+    KEEP (*(.fini))
91 
+
92 
+    . = ALIGN(4);
93 
+    _etext = .;        /* define a global symbols at end of code */
94 
+  } >FLASH
95 
+
96 
+  /* Constant data goes into FLASH */
97 
+  .rodata ALIGN(4):
98 
+  {
99 
+    . = ALIGN(4);
100 
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
101 
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
102 
+    . = ALIGN(4);
103 
+  } >FLASH
104 
+
105 
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
106 
+  .ARM : {
107 
+    __exidx_start = .;
108 
+    *(.ARM.exidx*)
109 
+    __exidx_end = .;
110 
+  } >FLASH
111 
+
112 
+  .preinit_array     :
113 
+  {
114 
+    PROVIDE_HIDDEN (__preinit_array_start = .);
115 
+    KEEP (*(.preinit_array*))
116 
+    PROVIDE_HIDDEN (__preinit_array_end = .);
117 
+  } >FLASH
118 
+  .init_array :
119 
+  {
120 
+    PROVIDE_HIDDEN (__init_array_start = .);
121 
+    KEEP (*(SORT(.init_array.*)))
122 
+    KEEP (*(.init_array*))
123 
+    PROVIDE_HIDDEN (__init_array_end = .);
124 
+  } >FLASH
125 
+  .fini_array :
126 
+  {
127 
+    PROVIDE_HIDDEN (__fini_array_start = .);
128 
+    KEEP (*(SORT(.fini_array.*)))
129 
+    KEEP (*(.fini_array*))
130 
+    PROVIDE_HIDDEN (__fini_array_end = .);
131 
+  } >FLASH
132 
+
133 
+  /* used by the startup to initialize data */
134 
+  _sidata = LOADADDR(.data);
135 
+
136 
+  /* Initialized data sections goes into RAM, load LMA copy after code */
137 
+  .data :
138 
+  {
139 
+    . = ALIGN(4);
140 
+    _sdata = .;        /* create a global symbol at data start */
141 
+    *(.data)           /* .data sections */
142 
+    *(.data*)          /* .data* sections */
143 
+
144 
+    . = ALIGN(4);
145 
+    _edata = .;        /* define a global symbol at data end */
146 
+  } >RAM AT> FLASH
147 
+
148 
+  _siccmram = LOADADDR(.ccmram);
149 
+
150 
+  /* CCM-RAM section
151 
+   *
152 
+   * IMPORTANT NOTE!
153 
+   * If initialized variables will be placed in this section,
154 
+   * the startup code needs to be modified to copy the init-values.
155 
+   */
156 
+  .ccmram :
157 
+  {
158 
+    . = ALIGN(4);
159 
+    _sccmram = .;       /* create a global symbol at ccmram start */
160 
+    *(.ccmram)
161 
+    *(.ccmram*)
162 
+
163 
+    . = ALIGN(4);
164 
+    _eccmram = .;       /* create a global symbol at ccmram end */
165 
+  } >CCMRAM AT> FLASH
166 
+
167 
+
168 
+  /* Uninitialized data section */
169 
+  . = ALIGN(4);
170 
+  .bss :
171 
+  {
172 
+    /* This is used by the startup in order to initialize the .bss section */
173 
+    _sbss = .;         /* define a global symbol at bss start */
174 
+    __bss_start__ = _sbss;
175 
+    *(.bss)
176 
+    *(.bss*)
177 
+    *(COMMON)
178 
+
179 
+    . = ALIGN(4);
180 
+    _ebss = .;         /* define a global symbol at bss end */
181 
+    __bss_end__ = _ebss;
182 
+  } >RAM
183 
+
184 
+  /* User_heap_stack section, used to check that there is enough RAM left */
185 
+  ._user_heap_stack :
186 
+  {
187 
+    . = ALIGN(4);
188 
+    PROVIDE ( end = . );
189 
+    PROVIDE ( _end = . );
190 
+    . = . + _Min_Heap_Size;
191 
+    . = . + _Min_Stack_Size;
192 
+    . = ALIGN(4);
193 
+  } >RAM
194 
+
195 
+  /* Remove information from the standard libraries */
196 
+  /DISCARD/ :
197 
+  {
198 
+    libc.a ( * )
199 
+    libm.a ( * )
200 
+    libgcc.a ( * )
201 
+  }
202 
+
203 
+  .ARM.attributes 0 : { *(.ARM.attributes) }
204 
+}

+ 212
- 0
buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/variant.cpp View File 

@@ -0,0 +1,212 @@
1 
+/*
2 
+ *******************************************************************************
3 
+ * Copyright (c) 2017, STMicroelectronics
4 
+ * All rights reserved.
5 
+ *
6 
+ * Redistribution and use in source and binary forms, with or without
7 
+ * modification, are permitted provided that the following conditions are met:
8 
+ *
9 
+ * 1. Redistributions of source code must retain the above copyright notice,
10 
+ *    this list of conditions and the following disclaimer.
11 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
12 
+ *    this list of conditions and the following disclaimer in the documentation
13 
+ *    and/or other materials provided with the distribution.
14 
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
15 
+ *    may be used to endorse or promote products derived from this software
16 
+ *    without specific prior written permission.
17 
+ *
18 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21 
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22 
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24 
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25 
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 
+ *******************************************************************************
29 
+ */
30 
+
31 
+#include "pins_arduino.h"
32 
+
33 
+#ifdef __cplusplus
34 
+extern "C" {
35 
+#endif
36 
+
37 
+
38 
+const PinName digitalPin[] = {
39 
+PA_1,
40 
+PA_2,
41 
+PA_3,
42 
+PA_4,
43 
+PA_5,
44 
+PA_6,
45 
+PA_7,
46 
+PA_8,
47 
+PA_9,
48 
+PA_10,
49 
+PA_11,
50 
+PA_12,
51 
+PA_13,
52 
+PA_14,
53 
+PA_15,
54 
+PB_0,
55 
+PB_1,
56 
+PB_2,
57 
+PB_3,
58 
+PB_4,
59 
+PB_5,
60 
+PB_6,
61 
+PB_7,
62 
+PB_8,
63 
+PB_9,
64 
+PB_10,
65 
+PB_11,
66 
+PB_12,
67 
+PB_13,
68 
+PB_14,
69 
+PB_15,
70 
+PC_2,
71 
+PC_3,
72 
+PC_4,
73 
+PC_5,
74 
+PC_6,
75 
+PC_7,
76 
+PC_8,
77 
+PC_9,
78 
+PC_10,
79 
+PC_11,
80 
+PC_12,
81 
+PC_13,
82 
+PC_14,
83 
+PC_15,
84 
+PD_0,
85 
+PD_1,
86 
+PD_2,
87 
+PD_3,
88 
+PD_4,
89 
+PD_5,
90 
+PD_6,
91 
+PD_7,
92 
+PD_8,
93 
+PD_9,
94 
+PD_10,
95 
+PD_11,
96 
+PD_12,
97 
+PD_13,
98 
+PD_14,
99 
+PD_15,
100 
+PE_0,
101 
+PE_1,
102 
+PE_11,
103 
+PE_3,
104 
+PE_4,
105 
+PE_5,
106 
+PE_6,
107 
+PE_7,
108 
+PE_8,
109 
+PE_9,
110 
+PE_10,
111 
+PE_2,
112 
+PE_12,
113 
+PE_13,
114 
+PE_14,
115 
+PE_15,
116 
+PF_0,
117 
+PF_1,
118 
+PF_2,
119 
+PF_6,
120 
+PF_7,
121 
+PF_8,
122 
+PF_9,
123 
+PF_11,
124 
+PF_12,
125 
+PF_13,
126 
+PF_14,
127 
+PF_15,
128 
+PG_0,
129 
+PG_1,
130 
+PG_2,
131 
+PG_3,
132 
+PG_4,
133 
+PG_5,
134 
+PG_6,
135 
+PG_7,
136 
+PG_8,
137 
+PG_9,
138 
+PG_10,
139 
+PG_11,
140 
+PG_12,
141 
+PG_13,
142 
+PG_14,
143 
+PG_15,
144 
+PH_0,
145 
+PH_1,
146 
+PA_0,
147 
+PC_1,
148 
+PC_0,
149 
+PF_10,
150 
+PF_5,
151 
+PF_4,
152 
+PF_3,
153 
+};
154 
+
155 
+#ifdef __cplusplus
156 
+}
157 
+#endif
158 
+
159 
+// ----------------------------------------------------------------------------
160 
+
161 
+#ifdef __cplusplus
162 
+extern "C" {
163 
+#endif
164 
+
165 
+/**
166 
+  * @brief  System Clock Configuration
167 
+  * @param  None
168 
+  * @retval None
169 
+  */
170 
+WEAK void SystemClock_Config(void)
171 
+{
172 
+
173 
+  RCC_OscInitTypeDef RCC_OscInitStruct;
174 
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
175 
+
176 
+  /**Configure the main internal regulator output voltage
177 
+  */
178 
+  __HAL_RCC_PWR_CLK_ENABLE();
179 
+
180 
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
181 
+
182 
+  /**Initializes the CPU, AHB and APB busses clocks
183 
+  */
184 
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
185 
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
186 
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
187 
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
188 
+  RCC_OscInitStruct.PLL.PLLM = 8;
189 
+  RCC_OscInitStruct.PLL.PLLN = 336;
190 
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
191 
+  RCC_OscInitStruct.PLL.PLLQ = 7;
192 
+  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
193 
+    _Error_Handler(__FILE__, __LINE__);
194 
+  }
195 
+
196 
+  /**Initializes the CPU, AHB and APB busses clocks
197 
+  */
198 
+  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
199 
+                                | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
200 
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
201 
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
202 
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
203 
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
204 
+
205 
+  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
206 
+    _Error_Handler(__FILE__, __LINE__);
207 
+  }
208 
+}
209 
+
210 
+#ifdef __cplusplus
211 
+}
212 
+#endif

+ 237
- 0
buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/variant.h View File 

@@ -0,0 +1,237 @@
1 
+/*
2 
+ *******************************************************************************
3 
+ * Copyright (c) 2017, STMicroelectronics
4 
+ * All rights reserved.
5 
+ *
6 
+ * Redistribution and use in source and binary forms, with or without
7 
+ * modification, are permitted provided that the following conditions are met:
8 
+ *
9 
+ * 1. Redistributions of source code must retain the above copyright notice,
10 
+ *    this list of conditions and the following disclaimer.
11 
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
12 
+ *    this list of conditions and the following disclaimer in the documentation
13 
+ *    and/or other materials provided with the distribution.
14 
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
15 
+ *    may be used to endorse or promote products derived from this software
16 
+ *    without specific prior written permission.
17 
+ *
18 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21 
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22 
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24 
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25 
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27 
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28 
+ *******************************************************************************
29 
+ */
30 
+#pragma once
31 
+
32 
+#ifdef __cplusplus
33 
+extern "C" {
34 
+#endif // __cplusplus
35 
+
36 
+/*----------------------------------------------------------------------------
37 
+ *        Pins
38 
+ *----------------------------------------------------------------------------*/
39 
+
40 
+
41 
+#define PA1 	0
42 
+#define PA2 	1
43 
+#define PA3 	2
44 
+#define PA4 	3
45 
+#define PA5 	4
46 
+#define PA6 	5
47 
+#define PA7 	6
48 
+#define PA8 	7
49 
+#define PA9   	8
50 
+#define PA10	9
51 
+#define PA11	10
52 
+#define PA12	11
53 
+#define PA13	12
54 
+#define PA14	13
55 
+#define PA15	14
56 
+#define PB0 	15
57 
+#define PB1 	16
58 
+#define PB2 	17
59 
+#define PB3 	18
60 
+#define PB4 	19
61 
+#define PB5 	20
62 
+#define PB6 	21
63 
+#define PB7 	22
64 
+#define PB8 	23
65 
+#define PB9 	24
66 
+#define PB10	25
67 
+#define PB11	26
68 
+#define PB12	27
69 
+#define PB13	28
70 
+#define PB14	29
71 
+#define PB15	30
72 
+#define PC2 	31
73 
+#define PC3 	32
74 
+#define PC4 	33
75 
+#define PC5 	34
76 
+#define PC6 	35
77 
+#define PC7 	36
78 
+#define PC8 	37
79 
+#define PC9 	38
80 
+#define PC10	39
81 
+#define PC11	40
82 
+#define PC12	41
83 
+#define PC13	42
84 
+#define PC14	43
85 
+#define PC15	44
86 
+#define PD0 	45
87 
+#define PD1 	46
88 
+#define PD2 	47
89 
+#define PD3 	48
90 
+#define PD4 	49
91 
+#define PD5 	50
92 
+#define PD6 	51
93 
+#define PD7 	52
94 
+#define PD8 	53
95 
+#define PD9 	54
96 
+#define PD10	55
97 
+#define PD11	56
98 
+#define PD12	57
99 
+#define PD13	58
100 
+#define PD14	59
101 
+#define PD15	60
102 
+#define PE0 	61
103 
+#define PE1 	62
104 
+#define PE11 	63
105 
+#define PE3 	64
106 
+#define PE4 	65
107 
+#define PE5 	66
108 
+#define PE6 	67
109 
+#define PE7 	68
110 
+#define PE8 	69
111 
+#define PE9 	70
112 
+#define PE10	71
113 
+#define PE2     72
114 
+#define PE12	73
115 
+#define PE13	74
116 
+#define PE14	75
117 
+#define PE15	76
118 
+#define PF0 	77
119 
+#define PF1 	78
120 
+#define PF2 	79
121 
+#define PF6 	80
122 
+#define PF7 	81
123 
+#define PF8 	82
124 
+#define PF9 	83
125 
+#define PF11	84
126 
+#define PF12	85
127 
+#define PF13	86
128 
+#define PF14	87
129 
+#define PF15	88
130 
+#define PG0 	89
131 
+#define PG1 	90
132 
+#define PG2 	91
133 
+#define PG3 	92
134 
+#define PG4 	93
135 
+#define PG5 	94
136 
+#define PG6 	95
137 
+#define PG7 	96
138 
+#define PG8 	97
139 
+#define PG9 	98
140 
+#define PG10	99
141 
+#define PG11	100
142 
+#define PG12	101
143 
+#define PG13	102
144 
+#define PG14	103
145 
+#define PG15	104
146 
+#define PH0 	105
147 
+#define PH1 	106
148 
+#define PA0   	107
149 
+#define PC1 	108
150 
+#define PC0 	109
151 
+#define PF10	110
152 
+#define PF5 	111
153 
+#define PF4 	112
154 
+#define PF3 	113
155 
+
156 
+// This must be a literal
157 
+#define NUM_DIGITAL_PINS        114
158 
+// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
159 
+#define NUM_ANALOG_INPUTS       7
160 
+#define NUM_ANALOG_FIRST        107
161 
+
162 
+
163 
+// Below SPI and I2C definitions already done in the core
164 
+// Could be redefined here if differs from the default one
165 
+// SPI Definitions
166 
+#define PIN_SPI_SS              PA4
167 
+#define PIN_SPI_MOSI            PA7
168 
+#define PIN_SPI_MISO            PA6
169 
+#define PIN_SPI_SCK             PA5
170 
+
171 
+// I2C Definitions
172 
+#define PIN_WIRE_SDA            PF0
173 
+#define PIN_WIRE_SCL            PF1
174 
+
175 
+// Timer Definitions
176 
+// Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
177 
+#define TIMER_TONE              TIM2
178 
+#define TIMER_SERVO             TIM5
179 
+#define TIMER_SERIAL            TIM7
180 
+
181 
+// UART Definitions
182 
+#define ENABLE_HWSERIAL1
183 
+#define ENABLE_HWSERIAL2
184 
+// Define here Serial instance number to map on Serial generic name
185 
+//#define SERIAL_UART_INSTANCE    1 //1 for Serial = Serial1 (USART1)
186 
+// DEBUG_UART could be redefined to print on another instance than 'Serial'
187 
+//#define DEBUG_UART              ((USART_TypeDef *) U(S)ARTX) // ex: USART3
188 
+// DEBUG_UART baudrate, default: 9600 if not defined
189 
+//#define DEBUG_UART_BAUDRATE     x
190 
+// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
191 
+//#define DEBUG_PINNAME_TX        PX_n // PinName used for TX
192 
+
193 
+// Default pin used for 'Serial' instance (ex: ST-Link)
194 
+// Mandatory for Firmata
195 
+#define PIN_SERIAL_RX           PA10
196 
+#define PIN_SERIAL_TX           PA9
197 
+
198 
+// Optional PIN_SERIALn_RX and PIN_SERIALn_TX where 'n' is the U(S)ART number
199 
+// Used when user instantiate a hardware Serial using its peripheral name.
200 
+// Example: HardwareSerial mySerial(USART3);
201 
+// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined.
202 
+#define PIN_SERIAL1_RX          PA10
203 
+#define PIN_SERIAL1_TX          PA9
204 
+#define PIN_SERIAL2_RX          PA3
205 
+#define PIN_SERIAL2_TX          PA2
206 
+
207 
+/* HAL configuration */
208 
+#define HSE_VALUE               8000000U
209 
+
210 
+#ifdef __cplusplus
211 
+} // extern "C"
212 
+#endif
213 
+/*----------------------------------------------------------------------------
214 
+ *        Arduino objects - C++ only
215 
+ *----------------------------------------------------------------------------*/
216 
+
217 
+#ifdef __cplusplus
218 
+// These serial port names are intended to allow libraries and architecture-neutral
219 
+// sketches to automatically default to the correct port name for a particular type
220 
+// of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
221 
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
222 
+//
223 
+// SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
224 
+//
225 
+// SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
226 
+//
227 
+// SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
228 
+//
229 
+// SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
230 
+//
231 
+// SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
232 
+//                            pins are NOT connected to anything by default.
233 
+#define SERIAL_PORT_MONITOR     	Serial
234 
+#define SERIAL_PORT_HARDWARE    	Serial1
235 
+#define SERIAL_PORT_HARDWARE_OPEN   Serial2
236 
+#endif
237 
+

+ 10
- 0
ini/stm32f4.ini View File 

@@ -72,6 +72,16 @@ board_upload.offset_address = 0x08008000
72 72 
 upload_command              = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE"
73 73
74 74 
 #
75 
+#  FYSETC SPIDER KING407 (STM32F407ZGT6 ARM Cortex-M4)
76 
+#
77 
+[env:FYSETC_SPIDER_KING407]
78 
+extends             = stm32_variant
79 
+board               = marlin_STM32F407ZGT6
80 
+board_build.variant = MARLIN_FYSETC_SPIDER_KING407
81 
+board_build.offset  = 0x8000
82 
+upload_protocol     = dfu
83 
+
84 
+#
75 85 
 # STM32F407VET6 with RAMPS-like shield
76 86 
 # 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
77 87 
 # Shield - https://github.com/jmz52/Hardware

Write Preview
Loading…
Cancel
Save