Move PINS_DEBUGGING to @section develop

Marlin/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/default/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -1705,11 +1705,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1964,5 +1959,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -1680,11 +1680,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1939,5 +1934,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1705,11 +1705,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1964,5 +1959,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1714,11 +1714,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1973,5 +1968,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -1709,11 +1709,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1968,5 +1963,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1973,5 +1968,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1969,5 +1964,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1711,11 +1711,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1980,5 +1975,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1711,11 +1711,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1975,5 +1970,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1951,5 +1946,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 //#define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Mks/Robin/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -1714,11 +1714,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1973,5 +1968,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/VORONDesign/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -1719,11 +1719,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1978,5 +1973,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -1681,11 +1681,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1940,5 +1935,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1955,5 +1950,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1708,11 +1708,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1967,5 +1962,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1706,11 +1706,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1965,5 +1960,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -1707,11 +1707,6 @@
 //#define CNC_COORDINATE_SYSTEMS
 
 /**
- * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
- */
-//#define PINS_DEBUGGING
-
-/**
  * Auto-report temperatures with M155 S<seconds>
  */
 #define AUTO_REPORT_TEMPERATURES
@@ -1966,5 +1961,12 @@
   #define WIFI_PWD  "Wifi Password"
 #endif
 
+// @section develop
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE