Browse Source

Merge pull request #1465 from CONSULitAS/Development_K8200_de

K8200: Example Configurations back in sync and readme update
Scott Lahteine 9 years ago
parent
commit
6250cc9a8d

+ 5
- 5
Marlin/example_configurations/K8200/Configuration.h View File

@@ -1,6 +1,6 @@
1
-#ifndef CONFIGURATION_H
1
+#ifndef CONFIGURATION_H
2 2
 #define CONFIGURATION_H
3
-
3
+
4 4
 #include "boards.h"
5 5
 
6 6
 
@@ -521,7 +521,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
521 521
 
522 522
 // default settings
523 523
 
524
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {64.25,64.25,2560,600}  // default steps per unit for Ultimaker
524
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {64.25,64.25,2560,600}  // default steps per unit for K8200
525 525
 #define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 500}    // (mm/sec)
526 526
 #define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
527 527
 
@@ -575,6 +575,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
575 575
 
576 576
 //LCD and SD support
577 577
 
578
+// VM8201 (LCD Option for K8200) uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
579
+
578 580
 // Character based displays can have different extended charsets.
579 581
 #define DISPLAY_CHARSET_HD44780_JAPAN     // "ääööüüß23°"
580 582
 //#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
@@ -586,9 +588,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
586 588
 //#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
587 589
 //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
588 590
 //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
589
-
590 591
 #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
591
-
592 592
 //#define ULTIPANEL  //the UltiPanel as on Thingiverse
593 593
 //#define LCD_FEEDBACK_FREQUENCY_HZ 1000	// this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
594 594
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click

+ 15
- 3
Marlin/example_configurations/K8200/Configuration_adv.h View File

@@ -75,9 +75,10 @@
75 75
 // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
76 76
 // Multiple extruders can be assigned to the same pin in which case
77 77
 // the fan will turn on when any selected extruder is above the threshold.
78
-#define EXTRUDER_0_AUTO_FAN_PIN   -1
79
-#define EXTRUDER_1_AUTO_FAN_PIN   -1
80
-#define EXTRUDER_2_AUTO_FAN_PIN   -1
78
+#define EXTRUDER_0_AUTO_FAN_PIN -1
79
+#define EXTRUDER_1_AUTO_FAN_PIN -1
80
+#define EXTRUDER_2_AUTO_FAN_PIN -1
81
+#define EXTRUDER_3_AUTO_FAN_PIN -1
81 82
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
82 83
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
83 84
 
@@ -483,6 +484,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
483 484
   #define THERMISTORHEATER_2 TEMP_SENSOR_2
484 485
   #define HEATER_2_USES_THERMISTOR
485 486
 #endif
487
+#if TEMP_SENSOR_3 > 0
488
+  #define THERMISTORHEATER_3 TEMP_SENSOR_3
489
+  #define HEATER_3_USES_THERMISTOR
490
+#endif
486 491
 #if TEMP_SENSOR_BED > 0
487 492
   #define THERMISTORBED TEMP_SENSOR_BED
488 493
   #define BED_USES_THERMISTOR
@@ -496,6 +501,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
496 501
 #if TEMP_SENSOR_2 == -1
497 502
   #define HEATER_2_USES_AD595
498 503
 #endif
504
+#if TEMP_SENSOR_3 == -1
505
+  #define HEATER_3_USES_AD595
506
+#endif
499 507
 #if TEMP_SENSOR_BED == -1
500 508
   #define BED_USES_AD595
501 509
 #endif
@@ -514,6 +522,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
514 522
   #undef HEATER_2_MINTEMP
515 523
   #undef HEATER_2_MAXTEMP
516 524
 #endif
525
+#if TEMP_SENSOR_3 == 0
526
+  #undef HEATER_3_MINTEMP
527
+  #undef HEATER_3_MAXTEMP
528
+#endif
517 529
 #if TEMP_SENSOR_BED == 0
518 530
   #undef BED_MINTEMP
519 531
   #undef BED_MAXTEMP

+ 4
- 1
Marlin/example_configurations/K8200/readme.md View File

@@ -1,9 +1,12 @@
1 1
 # Example Configuration for Vellemann K8200
2
-* Configuration files for **Vellemann K8200** (with VM8201 LCD/SD-Support)
2
+* Configuration files for **Vellemann K8200** (with VM8201 - LCD Option for K8200)
3 3
 * K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report.
4 4
 
5 5
 * updated manually with parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch
6 6
 
7
+* VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
8
+* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
9
+
7 10
 I (@CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for Windows (SD library added to IDE manually) - everything works well.
8 11
 
9 12
 **Source for genuine Vellemann Firmware V2 (with LCD/SD-Support):**

Loading…
Cancel
Save