Configurable PSU power-on delay (#16050)

Marlin/Configuration.h

@@ -325,13 +325,14 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
-  //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)
-    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_FANS         // Turn on PSU if fans need power
     #define AUTO_POWER_E_FANS
     #define AUTO_POWER_CONTROLLERFAN
     #define AUTO_POWER_CHAMBER_FAN

Marlin/src/Marlin.cpp

@@ -110,7 +110,7 @@
   #include "feature/I2CPositionEncoder.h"
 #endif
 
-#if HAS_TRINAMIC && DISABLED(PS_DEFAULT_OFF)
+#if HAS_TRINAMIC && DISABLED(PSU_DEFAULT_OFF)
   #include "feature/tmc_util.h"
 #endif
 
@@ -234,7 +234,7 @@ void setup_powerhold() {
     OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
   #endif
   #if ENABLED(PSU_CONTROL)
-    #if ENABLED(PS_DEFAULT_OFF)
+    #if ENABLED(PSU_DEFAULT_OFF)
       powersupply_on = true;  PSU_OFF();
     #else
       powersupply_on = false; PSU_ON();
@@ -1110,7 +1110,7 @@ void setup() {
     host_action_prompt_end();
   #endif
 
-  #if HAS_TRINAMIC && DISABLED(PS_DEFAULT_OFF)
+  #if HAS_TRINAMIC && DISABLED(PSU_DEFAULT_OFF)
     test_tmc_connection(true, true, true, true);
   #endif
 

Marlin/src/gcode/control/M80_M81.cpp

@@ -72,7 +72,7 @@
     #endif
 
     #if DISABLED(AUTO_POWER_CONTROL)
-      delay(100); // Wait for power to settle
+      delay(PSU_POWERUP_DELAY); // Wait for power to settle
       restore_stepper_drivers();
     #endif
 

Marlin/src/inc/Conditionals_post.h

@@ -330,6 +330,13 @@
     #else
       #define PSU_NAME "ATX"      // ATX style
     #endif
+    #if DISABLED(AUTO_POWER_CONTROL)
+      #ifndef PSU_POWERUP_DELAY
+        #define PSU_POWERUP_DELAY 100
+      #endif
+    #elif defined(PSU_POWERUP_DELAY)
+      #error "PSU_POWERUP_DELAY has no effect if AUTO_POWER_CONTROL is enabled."
+    #endif
   #else
     #define PSU_NAME "Generic"    // No control
   #endif

Marlin/src/inc/SanityCheck.h

@@ -416,6 +416,8 @@
   #error "BABYSTEP_MULTIPLICATOR is now BABYSTEP_MULTIPLICATOR_[XY|Z]. Please update Configuration_adv.h."
 #elif defined(LULZBOT_TOUCH_UI)
   #error "LULZBOT_TOUCH_UI is now TOUCH_UI_FTDI_EVE. Please update your configuration."
+#elif defined(PS_DEFAULT_OFF)
+  #error "PS_DEFAULT_OFF is now PSU_DEFAULT_OFF. Please update your configuration."
 #endif
 
 #define BOARD_MKS_13        -1000

config/default/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -363,9 +363,10 @@
 #define PSU_NAME "360W 24V/15A"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Alfawise/U20/Configuration.h

@@ -363,9 +363,10 @@
 #define PSU_NAME "360W 24V/15A"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/AliExpress/CL-260/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/A2/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/A2plus/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/A6/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/A8/Configuration.h

@@ -326,9 +326,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/A8plus/Configuration.h

@@ -326,9 +326,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Anet/E16/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/AnyCubic/i3/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/ArmEd/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Azteeg/X5GT/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BIBO/TouchX/default/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BQ/Hephestos/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BQ/Hephestos_2/Configuration.h

@@ -333,9 +333,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BQ/WITBOX/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Cartesio/Configuration.h

@@ -326,9 +326,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-10/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-10S/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-10_5S/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-10mini/Configuration.h

@@ -334,9 +334,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-20/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/CR-8/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/Ender-2/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/Ender-3/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/Ender-4/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Creality/Ender-5/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Einstart-S/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/AIO_II/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/Cheetah 1.2/base/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/Cheetah/BLTouch/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/Cheetah/base/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/F6_13/Configuration.h

@@ -327,9 +327,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FYSETC/S6/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Felix/DUAL/Configuration.h

@@ -325,9 +325,9 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PS_DEFAULT_OFF        // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Felix/Single/Configuration.h

@@ -325,9 +325,9 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PS_DEFAULT_OFF        // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Formbot/Raptor/Configuration.h

@@ -366,9 +366,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -334,9 +334,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -329,9 +329,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A10/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A10M/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A10T/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A20/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A20M/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/A20T/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/GT2560/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/MeCreator2/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/HMS434/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Infitary/i3-M508/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/JGAurora/A1/Configuration.h

@@ -330,9 +330,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/JGAurora/A5/Configuration.h

@@ -330,9 +330,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/JGAurora/A5S/Configuration.h

@@ -330,9 +330,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/MakerParts/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Malyan/M150/Configuration.h

@@ -330,9 +330,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Malyan/M200/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Micromake/C1/basic/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Micromake/C1/enhanced/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Mks/Robin/Configuration.h

@@ -326,9 +326,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Mks/Sbase/Configuration.h

@@ -325,9 +325,9 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  #define PS_DEFAULT_OFF        // Keep power off until enabled directly with M80
+  #define PSU_DEFAULT_OFF       // Keep power off until enabled directly with M80
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Printrbot/PrintrboardG2/Configuration.h

@@ -326,9 +326,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/RapideLite/RL200/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Renkforce/RF100/Configuration.h

@@ -328,9 +328,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Renkforce/RF100XL/Configuration.h

@@ -328,9 +328,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Renkforce/RF100v2/Configuration.h

@@ -328,9 +328,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/RepRapPro/Huxley/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/RigidBot/Configuration.h

@@ -328,9 +328,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/SCARA/Configuration.h

@@ -352,9 +352,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/STM32/Black_STM32F407VET6/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/STM32/STM32F103RE/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/STM32/STM32F4/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/STM32/stm32f103ret6/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Sanguinololu/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)

config/examples/Tevo/Michelangelo/Configuration.h

@@ -325,9 +325,10 @@
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
-  #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2)
+  #define PSU_ACTIVE_HIGH false     // Set 'false' for ATX, 'true' for X-Box
 
-  //#define PS_DEFAULT_OFF      // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF         // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY 100   // (ms) Delay for the PSU to warm up to full power
 
   //#define AUTO_POWER_CONTROL  // Enable automatic control of the PS_ON pin
   #if ENABLED(AUTO_POWER_CONTROL)