🎨 Update more EXP Headers

Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h

@@ -27,7 +27,7 @@
 
 #include "env_validate.h"
 
-#define BOARD_INFO_NAME "AZSMZ MINI"
+#define BOARD_INFO_NAME "AZSMZ Mini"
 
 //
 // Servos
@@ -76,6 +76,7 @@
 //
 // Heaters / Fans
 //
+
 // EFB
 #define HEATER_0_PIN                       P2_04
 #define HEATER_BED_PIN                     P2_05
@@ -117,14 +118,14 @@
 //
 // Ethernet pins
 //
+#define REF_CLK                            P1_15
 #define ENET_MDIO                          P1_17
-#define ENET_RX_ER                         P1_14
-#define ENET_RXD1                          P1_10
 #define ENET_MOC                           P1_16
-#define REF_CLK                            P1_15
-#define ENET_RXD0                          P1_09
 #define ENET_CRS                           P1_08
+#define ENET_RX_ER                         P1_14
 #define ENET_TX_EN                         P1_04
+#define ENET_RXD0                          P1_09
+#define ENET_RXD1                          P1_10
 #define ENET_TXD0                          P1_00
 #define ENET_TXD1                          P1_01
 

Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h

@@ -53,26 +53,25 @@
 #define E0_ENABLE_PIN                      P2_12
 
 
-/**
- *          ------                    ------
- *      NC | 1  2 | GND           5V | 1  2 | GND
- *   RESET | 3  4 | 1.31          NC | 3  4 | NC
- *    0.18 | 5  6   3.25          NC | 5  6   0.15
- *    1.23 | 7  8 | 3.26        0.16 | 7  8 | 0.18
- *    0.15 | 9 10 | 0.17        2.11 | 9 10 | 1.30
- *          ------                    ------
- *           EXP2                      EXP1
+/**        ------                  ------
+ *   1.30 |10  9 | 2.11      0.17 |10  9 | 0.15
+ *   0.18 | 8  7 | 0.16      3.26 | 8  7 | 1.23
+ *   0.15   6  5 | NC        3.25   6  5 | 0.18
+ *     NC | 4  3 | NC        1.31 | 4  3 | RESET
+ *    GND | 2  1 | 5V         GND | 2  1 | NC
+ *         ------                  ------
+ *          EXP1                    EXP2
  */
-#define EXP1_03_PIN                        -1
-#define EXP1_04_PIN                        -1
-#define EXP1_05_PIN                        -1
+#define EXP1_03_PIN                        -1     // NC
+#define EXP1_04_PIN                        -1     // NC
+#define EXP1_05_PIN                        -1     // NC
 #define EXP1_06_PIN                        P0_15
 #define EXP1_07_PIN                        P0_16
 #define EXP1_08_PIN                        P0_18
 #define EXP1_09_PIN                        P2_11
 #define EXP1_10_PIN                        P1_30
 
-#define EXP2_03_PIN                        -1
+#define EXP2_03_PIN                        -1     // RESET
 #define EXP2_04_PIN                        P1_31
 #define EXP2_05_PIN                        P0_18
 #define EXP2_06_PIN                        P3_25

Marlin/src/pins/lpc1768/pins_MKS_SBASE.h

@@ -215,6 +215,9 @@
  * that the garbage/lines are erased immediately after the SD card accesses are completed.
  */
 
+//
+// LCD / Controller
+//
 #if IS_TFTGLCD_PANEL
 
   #if ENABLED(TFTGLCD_PANEL_SPI)
@@ -341,10 +344,8 @@
 #endif
 
 // UNUSED
-#define PIN_P0_27                          P0_27  // EXP2/Onboard SD
-#define PIN_P0_28                          P0_28  // EXP2
-#define PIN_P0_02                          P0_02  // AUX1 (Interrupt Capable/ADC/Serial Port 0)
-#define PIN_P0_03                          P0_03  // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+//#define PIN_P0_02                        P0_02  // AUX1 (Interrupt Capable/ADC/Serial Port 0)
+//#define PIN_P0_03                        P0_03  // AUX1 (Interrupt Capable/ADC/Serial Port 0)
 
 /**
  *  PWMs

Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h

@@ -255,15 +255,14 @@
   #define LED4_PIN                         P1_21
 #endif
 
-/**
- *                -----                                            -----
- * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC)               (MISO) 0.8  | · · | 0.7  (SD_SCK)
- * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS)             (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2)
- * (LCD_D4) 0.15 | · · | 0.17 (LCD_D5)             (BTN_EN2) 3.26 | · · | 0.9  (SD_MOSI)
- * (LCD_D6)  1.0 | · · | 1.22 (LCD_D7)           (SD_DETECT) 0.27 | · · | RST
- *           GND | · · | 5V                                   GND | · · | NC
- *                -----                                            -----
- *                EXP1                                             EXP2
+/**                ------                                     ------
+ *  (BEEPER) 1.31 |10  9 | 1.30 (BTN_ENC)        (MISO) 0.8  |10  9 | 0.7  (SD_SCK)
+ *  (LCD_EN) 0.18 | 8  7 | 0.16 (LCD_RS)      (BTN_EN1) 3.25 | 8  7 | 0.28 (SD_CS2)
+ *  (LCD_D4) 0.15 | 6  5 | 0.17 (LCD_D5)      (BTN_EN2) 3.26 | 6  5 | 0.9  (SD_MOSI)
+ *  (LCD_D6)  1.0 | 4  3 | 1.22 (LCD_D7)    (SD_DETECT) 0.27 | 4  3 | RST
+ *            GND | 2  1 | 5V                            GND | 2  1 | NC
+ *                 ------                                     ------
+ *                  EXP1                                       EXP2
  */
 #define EXP1_03_PIN                        P1_22
 #define EXP1_04_PIN                        P1_00

Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h

@@ -96,7 +96,7 @@
 /**                ------                                    ------
  *  (BEEPER) PC10 |10  9 | PC11 (BTN_ENC)        (MISO) PB4 |10  9 | PB3   (SCK)
  *  (LCD_EN) PB6  | 8  7 | PC12  (LCD_RS)     (BTN_EN1) PD2 | 8  7 | PA15  (SD_SS)
- *  (LCD_D4) PC13 | 6  5 | PB7   (LCD_D5)     (BTN_EN2) PB8 | 6  5 | PB5   (MOSI)
+ *  (LCD_D4) PC13   6  5 | PB7   (LCD_D5)     (BTN_EN2) PB8   6  5 | PB5   (MOSI)
  *  (LCD_D6) PC15 | 4  3 | PC14  (LCD_D7)   (SD_DETECT) PB9 | 4  3 | RESET
  *           GND  | 2  1 | 5V                           GND | 2  1 | NC
  *                 ------                                    ------

Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h

@@ -165,7 +165,7 @@
      *        ------
      *  PC6  |10  9 | PB2
      *  PB10 | 8  7 | PE8
-     *  PB14 | 6  5 | PB13
+     *  PB14   6  5 | PB13
      *  PB12 | 4  3 | PB15
      *  GND  | 2  1 | 5V
      *        ------
@@ -189,7 +189,7 @@
      *        ------
      *  ?    |10  9 | PC5
      *  PB10 | 8  7 | ?
-     *  PA6  | 6  5 | PA5
+     *  PA6    6  5 | PA5
      *  PA4  | 4  3 | PA7
      *  GND  | 2  1 | 5V
      *        ------

Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h

@@ -294,13 +294,14 @@
   #define TFT_BACKLIGHT_PIN                 PD13
 
   #define LCD_USE_DMA_FSMC                        // Use DMA transfers to send data to the TFT
-  #define FSMC_CS_PIN                       PD7   // NE4
-  #define FSMC_RS_PIN                       PD11  // A0
   #define FSMC_DMA_DEV                      DMA2
   #define FSMC_DMA_CHANNEL               DMA_CH5
 
-  #define TFT_CS_PIN                  TFT_CS_PIN
-  #define TFT_RS_PIN                  TFT_RS_PIN
+  #define FSMC_CS_PIN                       PD7   // NE4
+  #define FSMC_RS_PIN                       PD11  // A0
+
+  #define TFT_CS_PIN                 FSMC_CS_PIN
+  #define TFT_RS_PIN                 FSMC_RS_PIN
 
   #ifdef TFT_CLASSIC_UI
     #define TFT_MARLINBG_COLOR            0x3186  // Grey
@@ -309,11 +310,14 @@
     #define TFT_BTOKMENU_COLOR            0x145F  // Cyan
   #endif
   #define TFT_BUFFER_SIZE                  14400
+
 #elif HAS_GRAPHICAL_TFT
+
   #define TFT_RESET_PIN                     PC6
   #define TFT_BACKLIGHT_PIN                 PD13
   #define TFT_CS_PIN                        PD7   // NE4
   #define TFT_RS_PIN                        PD11  // A0
+
 #endif
 
 #if NEED_TOUCH_PINS

Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h

@@ -130,29 +130,39 @@
   #define RGB_LED_B_PIN                     PB6
 #endif
 
-/*
-* EXP1 pinout for the LCD according to Fysetcs schematic for the Cheetah board
-*                 -----
-*  (BEEPER) PC9  | 1 2 | PC12 (BTN_ENC)
-* (BTN_EN2) PC11 | 3 4 | PB14 (LCD_RS / MISO)
-* (BTN_EN1) PC10   5 6 | PB13 (SCK)
-*  (LCD_EN) PB12 | 7 8 | PB15 (MOSI)
-*            GND | 9 10| 5V
-*                 -----
-*                 EXP1
-* Note: The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board.
-* Note: Functionally the pins are assigned in the same order as on the Ender-3 board.
-* Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board.
-*/
+/**
+ * EXP1 pinout for the LCD according to FYSETC's Cheetah board schematic
+ *                 ------
+ * (BEEPER)  PC9  |10  9 | PC12 (BTN_ENC)
+ * (BTN_EN2) PC11 | 8  7 | PB14 (LCD_RS / MISO)
+ * (BTN_EN1) PC10   6  5 | PB13 (SCK)
+ * (LCD_EN)  PB12 | 4  3 | PB15 (MOSI)
+ *            GND | 2  1 | 5V
+ *                 ------
+ *                  EXP1
+ *
+ * Notes:
+ *  - The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board.
+ *  - Functionally the pins are assigned in the same order as on the Ender-3 board.
+ *  - Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board.
+ */
+#define EXP1_03_PIN                         PB15
+#define EXP1_04_PIN                         PB12
+#define EXP1_05_PIN                         PB13
+#define EXP1_06_PIN                         PC10
+#define EXP1_07_PIN                         PB14
+#define EXP1_08_PIN                         PC11
+#define EXP1_09_PIN                         PC12
+#define EXP1_10_PIN                         PC9
 
 #if HAS_WIRED_LCD
-  #define BEEPER_PIN                        PC9
+  #define BEEPER_PIN                 EXP1_10_PIN
 
   #if HAS_MARLINUI_U8GLIB
-    #define DOGLCD_A0                       PB14
-    #define DOGLCD_CS                       PB12
-    #define DOGLCD_SCK                      PB13
-    #define DOGLCD_MOSI                     PB15
+    #define DOGLCD_A0                EXP1_07_PIN
+    #define DOGLCD_CS                EXP1_04_PIN
+    #define DOGLCD_SCK               EXP1_05_PIN
+    #define DOGLCD_MOSI              EXP1_03_PIN
     //#define LCD_SCREEN_ROT_90
     //#define LCD_SCREEN_ROT_180
     //#define LCD_SCREEN_ROT_270
@@ -162,30 +172,30 @@
     #endif
   #endif
 
-  #define LCD_PINS_RS                       PB12  // CS -- SOFT SPI for ENDER3 LCD
-  #define LCD_PINS_D4                       PB13  // SCLK
-  #define LCD_PINS_ENABLE                   PB15  // DATA MOSI
+  #define LCD_PINS_RS                EXP1_04_PIN  // CS -- SOFT SPI for ENDER3 LCD
+  #define LCD_PINS_D4                EXP1_05_PIN  // SCLK
+  #define LCD_PINS_ENABLE            EXP1_03_PIN  // DATA MOSI
 
   //#define LCD_CONTRAST_INIT                190
 
   #if IS_NEWPANEL
-    #define BTN_EN1                         PC10
-    #define BTN_EN2                         PC11
-    #define BTN_ENC                         PC12
+    #define BTN_EN1                  EXP1_06_PIN
+    #define BTN_EN2                  EXP1_08_PIN
+    #define BTN_ENC                  EXP1_09_PIN
   #endif
 #endif
 
 #if ENABLED(TOUCH_UI_FTDI_EVE)
-  #define BEEPER_PIN                        PC9
-  #define CLCD_MOD_RESET                    PC11
-  #define CLCD_SPI_CS                       PB12
+  #define BEEPER_PIN                 EXP1_10_PIN
+  #define CLCD_MOD_RESET             EXP1_08_PIN
+  #define CLCD_SPI_CS                EXP1_04_PIN
 
   //#define CLCD_USE_SOFT_SPI                     // the Cheetah can use hardware-SPI so we do not really need this
 
   #if ENABLED(CLCD_USE_SOFT_SPI)
-    #define CLCD_SOFT_SPI_MOSI              PB15
-    #define CLCD_SOFT_SPI_MISO              PB14
-    #define CLCD_SOFT_SPI_SCLK              PB13
+    #define CLCD_SOFT_SPI_MOSI       EXP1_03_PIN
+    #define CLCD_SOFT_SPI_MISO       EXP1_07_PIN
+    #define CLCD_SOFT_SPI_SCLK       EXP1_05_PIN
   #else
     #define CLCD_SPI_BUS                       2
   #endif

Marlin/src/pins/stm32f4/pins_FYSETC_S6.h

@@ -195,7 +195,7 @@
  *         ------                 ------
  *   PC9  |10  9 | PA8      PA6  |10  9 | PA5
  *   PC11 | 8  7 | PD2      PC6  | 8  7 | PA4
- *   PC10 | 6  5   PC12     PC7  | 6  5   PA7
+ *   PC10   6  5 | PC12     PC7    6  5 | PA7
  *   PD0  | 4  3 | PD1      PB10 | 4  3 | RESET
  *   GND  | 2  1 | 5V       GND  | 2  1 | 5V
  *         ------                 ------

Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h

@@ -237,7 +237,7 @@
  *                  ------                                      ------
  *   (BEEPER) PB2  |10  9 | PE10 (BTN_ENC)    (SPI1 MISO) PA6  |10  9 | PA5 (SPI1 SCK)
  *   (LCD_EN) PE11 | 8  7 | PD10 (LCD_RS)       (BTN_EN1) PE9  | 8  7 | PA4 (SPI1 CS)
- *   (LCD_D4) PD9  | 6  5   PD8  (LCD_D5)       (BTN_EN2) PE8  | 6  5   PA7 (SPI1 MOSI)
+ *   (LCD_D4) PD9    6  5 | PD8  (LCD_D5)       (BTN_EN2) PE8    6  5 | PA7 (SPI1 MOSI)
  *   (LCD_D6) PE15 | 4  3 | PE7  (LCD_D7)       (SPI1_RS) PB11 | 4  3 | RESET
  *            GND  | 2  1 | 5V                             GND | 2  1 | 3.3V
  *                  ------                                      ------

Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h

@@ -215,8 +215,8 @@
 // Onboard SD card
 // NOT compatible with LCD
 //
-// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
-#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD
+// Detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled
+#if SD_CONNECTION_IS(ONBOARD)
   #if USE_NEW_SPI_API
     #define SD_SPI MARLIN_SPI(HardwareSPI3, PC9)
   #else
@@ -230,17 +230,44 @@
   #define SD_DETECT_PIN                     PD12
 #endif
 
-/*
+/**               ------                                      ------
+ * (BEEPER) PC5  |10  9 | PE13 (BTN_ENC)    (SPI1 MISO) PA6  |10  9 | PA5  (SPI1 SCK)
+ * (LCD_EN) PD13 | 8  7 | PC6  (LCD_RS)       (BTN_EN1) PE8  | 8  7 | PE10 (SPI1 CS)
+ * (LCD_D4) PE14   6  5 | PE15 (LCD_D5)       (BTN_EN2) PE11   6  5 | PA7  (SPI1 MOSI)
+ * (LCD_D6) PD11 | 4  3 | PD10 (LCD_D7)       (SPI DET) PE12 | 4  3 | RESET
+ *           GND | 2  1 | 5V                             GND | 2  1 | 3.3V
+ *                ------                                      ------
+ *                 EXP1                                        EXP2
+ */
+#define EXP1_03_PIN                     PD10
+#define EXP1_04_PIN                     PD11
+#define EXP1_05_PIN                     PE15
+#define EXP1_06_PIN                     PE14
+#define EXP1_07_PIN                     PC6
+#define EXP1_08_PIN                     PD13
+#define EXP1_09_PIN                     PE13
+#define EXP1_10_PIN                     PC5
+
+#define EXP2_03_PIN                     -1    // RESET
+#define EXP2_04_PIN                     PE12
+#define EXP2_05_PIN                     PA7
+#define EXP2_06_PIN                     PE11
+#define EXP2_07_PIN                     PE10
+#define EXP2_08_PIN                     PE8
+#define EXP2_09_PIN                     PA5
+#define EXP2_10_PIN                     PA6
+
 //
 // LCD SD
 //
-#if SDCARD_CONNECTION == LCD
+/*
+#if SD_CONNECTION_IS(LCD)
   #define ENABLE_SPI1
-  #define SDSS                              PE10
-  #define SD_SCK_PIN                        PA5
-  #define SD_MISO_PIN                       PA6
-  #define SD_MOSI_PIN                       PA7
-  #define SD_DETECT_PIN                     PE12
+  #define SDSS                       EXP2_07_PIN
+  #define SD_SCK_PIN                 EXP2_09_PIN
+  #define SD_MISO_PIN                EXP2_10_PIN
+  #define SD_MOSI_PIN                EXP2_05_PIN
+  #define SD_DETECT_PIN              EXP2_04_PIN
 #endif
 */
 
@@ -257,17 +284,6 @@
   #define SPI_FLASH_SCK_PIN                 PB13
 #endif
 
-/**
- *                -----                                             -----
- *   (BEEPER)PC5 | · · | PE13(BTN_ENC)             (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK)
- *  (LCD_EN)PD13 | · · | PC6(LCD_RS)                 (BTN_EN1) PE8 | · · | PE10 (SPI1 CS)
- *  (LCD_D4)PE14 | · · | PE15(LCD_D5)               (BTN_EN2) PE11 | · · | PA7 (SPI1 MOSI)
- *  (LCD_D6)PD11 | · · | PD10(LCD_D7)               (SPI DET) PE12 | · · | RESET
- *           GND | · · | 5V                                    GND | · · | 3.3V
- *                -----                                             -----
- *                EXP1                                               EXP2
- */
-
 #if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
   #ifndef TOUCH_CALIBRATION_X
     #define TOUCH_CALIBRATION_X           -17253
@@ -285,21 +301,21 @@
     #define TOUCH_ORIENTATION    TOUCH_LANDSCAPE
   #endif
 
-  #define TFT_CS_PIN                        PD11
-  #define TFT_SCK_PIN                       PA5
-  #define TFT_MISO_PIN                      PA6
-  #define TFT_MOSI_PIN                      PA7
-  #define TFT_DC_PIN                        PD10
-  #define TFT_RST_PIN                       PC6
+  #define TFT_CS_PIN                 EXP1_04_PIN
+  #define TFT_SCK_PIN                EXP2_09_PIN
+  #define TFT_MISO_PIN               EXP2_10_PIN
+  #define TFT_MOSI_PIN               EXP2_05_PIN
+  #define TFT_DC_PIN                 EXP1_03_PIN
+  #define TFT_RST_PIN                EXP1_07_PIN
   #define TFT_A0_PIN                  TFT_DC_PIN
 
-  #define TFT_RESET_PIN                     PC6
-  #define TFT_BACKLIGHT_PIN                 PD13
+  #define TFT_RESET_PIN              EXP1_07_PIN
+  #define TFT_BACKLIGHT_PIN          EXP1_08_PIN
 
   #define TOUCH_BUTTONS_HW_SPI
   #define TOUCH_BUTTONS_HW_SPI_DEVICE          1
 
-  #define LCD_BACKLIGHT_PIN                 PD13
+  #define LCD_BACKLIGHT_PIN          EXP1_08_PIN
   #ifndef TFT_WIDTH
     #define TFT_WIDTH                        480
   #endif
@@ -307,15 +323,15 @@
     #define TFT_HEIGHT                       320
   #endif
 
-  #define TOUCH_CS_PIN                      PE14  // SPI1_NSS
-  #define TOUCH_SCK_PIN                     PA5   // SPI1_SCK
-  #define TOUCH_MISO_PIN                    PA6   // SPI1_MISO
-  #define TOUCH_MOSI_PIN                    PA7   // SPI1_MOSI
+  #define TOUCH_CS_PIN               EXP1_06_PIN  // SPI1_NSS
+  #define TOUCH_SCK_PIN              EXP2_09_PIN  // SPI1_SCK
+  #define TOUCH_MISO_PIN             EXP2_10_PIN  // SPI1_MISO
+  #define TOUCH_MOSI_PIN             EXP2_05_PIN  // SPI1_MOSI
 
-  #define BTN_EN1                           PE8
-  #define BTN_EN2                           PE11
-  #define BEEPER_PIN                        PC5
-  #define BTN_ENC                           PE13
+  #define BTN_EN1                    EXP2_08_PIN
+  #define BTN_EN2                    EXP2_06_PIN
+  #define BEEPER_PIN                 EXP1_10_PIN
+  #define BTN_ENC                    EXP1_09_PIN
 
   #define LCD_READ_ID                       0xD3
   #define LCD_USE_DMA_SPI
@@ -325,22 +341,22 @@
 
 #elif HAS_WIRED_LCD
 
-  #define BEEPER_PIN                        PC5
-  #define BTN_ENC                           PE13
-  #define LCD_PINS_ENABLE                   PD13
-  #define LCD_PINS_RS                       PC6
-  #define BTN_EN1                           PE8
-  #define BTN_EN2                           PE11
+  #define BEEPER_PIN                 EXP1_10_PIN
+  #define BTN_ENC                    EXP1_09_PIN
+  #define LCD_PINS_ENABLE            EXP1_08_PIN
+  #define LCD_PINS_RS                EXP1_07_PIN
+  #define BTN_EN1                    EXP2_08_PIN
+  #define BTN_EN2                    EXP2_06_PIN
   #define LCD_BACKLIGHT_PIN                 -1
 
   // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
   #if ENABLED(MKS_MINI_12864)
     //#define LCD_BACKLIGHT_PIN             -1
     //#define LCD_RESET_PIN                 -1
-    #define DOGLCD_A0                       PD11
-    #define DOGLCD_CS                       PE15
-    //#define DOGLCD_SCK                    PA5
-    //#define DOGLCD_MOSI                   PA7
+    #define DOGLCD_A0                EXP1_04_PIN
+    #define DOGLCD_CS                EXP1_05_PIN
+    //#define DOGLCD_SCK             EXP2_09_PIN
+    //#define DOGLCD_MOSI            EXP2_05_PIN
 
     // Required for MKS_MINI_12864 with this board
     //#define MKS_LCD12864B
@@ -348,15 +364,15 @@
 
   #else                                           // !MKS_MINI_12864
 
-    #define LCD_PINS_D4                     PE14
+    #define LCD_PINS_D4              EXP1_06_PIN
     #if ENABLED(ULTIPANEL)
-      #define LCD_PINS_D5                   PE15
-      #define LCD_PINS_D6                   PD11
-      #define LCD_PINS_D7                   PD10
+      #define LCD_PINS_D5            EXP1_05_PIN
+      #define LCD_PINS_D6            EXP1_04_PIN
+      #define LCD_PINS_D7            EXP1_03_PIN
     #endif
 
-    #define BOARD_ST7920_DELAY_1    DELAY_NS(96)
-    #define BOARD_ST7920_DELAY_2    DELAY_NS(48)
+    #define BOARD_ST7920_DELAY_1   DELAY_NS( 96)
+    #define BOARD_ST7920_DELAY_2   DELAY_NS( 48)
     #define BOARD_ST7920_DELAY_3   DELAY_NS(600)
 
   #endif // !MKS_MINI_12864