Allow G26 with no heated bed (#13511)

Marlin/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

Marlin/src/gcode/bedlevel/G26.cpp

@@ -569,13 +569,15 @@ void GcodeSuite::G26() {
   bool g26_continue_with_closest = parser.boolval('C'),
        g26_keep_heaters_on       = parser.boolval('K');
 
-  if (parser.seenval('B')) {
-    g26_bed_temp = parser.value_celsius();
-    if (g26_bed_temp && !WITHIN(g26_bed_temp, 40, (BED_MAXTEMP - 10))) {
-      SERIAL_ECHOLNPAIR("?Specified bed temperature not plausible (40-", int(BED_MAXTEMP - 10), "C).");
-      return;
+  #if HAS_HEATED_BED
+    if (parser.seenval('B')) {
+      g26_bed_temp = parser.value_celsius();
+      if (g26_bed_temp && !WITHIN(g26_bed_temp, 40, (BED_MAXTEMP - 10))) {
+        SERIAL_ECHOLNPAIR("?Specified bed temperature not plausible (40-", int(BED_MAXTEMP - 10), "C).");
+        return;
+      }
     }
-  }
+  #endif
 
   if (parser.seenval('L')) {
     g26_layer_height = parser.value_linear_units();

config/default/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1676,8 +1676,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Anet/A2/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Anet/A6/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Anet/A8/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/ArmEd/Configuration_adv.h

@@ -1678,8 +1678,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1679,8 +1679,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Cartesio/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/CR-10/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/CR-8/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Einstart-S/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Felix/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1670,8 +1670,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1676,8 +1676,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1678,8 +1678,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1678,8 +1678,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/JGAurora/A5/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/MakerParts/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Malyan/M150/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Malyan/M200/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Mks/Robin/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Mks/Sbase/Configuration_adv.h

@@ -1675,8 +1675,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/RigidBot/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/SCARA/Configuration_adv.h

@@ -1671,8 +1671,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Sanguinololu/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/TheBorg/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/TinyBoy2/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/VORONDesign/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Velleman/K8200/Configuration_adv.h

@@ -1687,8 +1687,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Velleman/K8400/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/generic/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/kossel_mini/Configuration_adv.h

@@ -1672,8 +1672,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/delta/kossel_xl/Configuration_adv.h

@@ -1673,8 +1673,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/makibox/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/tvrrug/Round2/Configuration_adv.h

@@ -1674,8 +1674,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \

config/examples/wt150/Configuration_adv.h

@@ -1675,8 +1675,7 @@
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
-   * https://github.com/teemuatlut/TMC2130Stepper
-   * https://github.com/teemuatlut/TMC2208Stepper
+   * https://github.com/teemuatlut/TMCStepper
    *
    * Example:
    * #define TMC_ADV() { \