🎨 Tweak NEOPIXEL_LED format

Marlin/Configuration.h

@@ -3051,30 +3051,30 @@
 // Support for Adafruit NeoPixel LED driver
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
-  #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  //#define NEOPIXEL_PIN     4     // LED driving pin
-  //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
-  //#define NEOPIXEL2_PIN    5
-  #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
-  #define NEOPIXEL_IS_SEQUENTIAL   // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
-  #define NEOPIXEL_BRIGHTNESS 127  // Initial brightness (0-255)
-  //#define NEOPIXEL_STARTUP_TEST  // Cycle through colors at startup
+  #define NEOPIXEL_TYPE          NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
+  //#define NEOPIXEL_PIN                4 // LED driving pin
+  //#define NEOPIXEL2_TYPE  NEOPIXEL_TYPE
+  //#define NEOPIXEL2_PIN               5
+  #define NEOPIXEL_PIXELS              30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
+  #define NEOPIXEL_IS_SEQUENTIAL          // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
+  #define NEOPIXEL_BRIGHTNESS         127 // Initial brightness (0-255)
+  //#define NEOPIXEL_STARTUP_TEST         // Cycle through colors at startup
 
   // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ...
   //#define NEOPIXEL2_SEPARATE
   #if ENABLED(NEOPIXEL2_SEPARATE)
-    #define NEOPIXEL2_PIXELS      15  // Number of LEDs in the second strip
-    #define NEOPIXEL2_BRIGHTNESS 127  // Initial brightness (0-255)
-    #define NEOPIXEL2_STARTUP_TEST    // Cycle through colors at startup
+    #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
+    #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
+    #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
   #else
-    //#define NEOPIXEL2_INSERIES      // Default behavior is NeoPixel 2 in parallel
+    //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif
 
   // Use some of the NeoPixel LEDs for static (background) lighting
-  //#define NEOPIXEL_BKGD_INDEX_FIRST  0              // Index of the first background LED
-  //#define NEOPIXEL_BKGD_INDEX_LAST   5              // Index of the last background LED
+  //#define NEOPIXEL_BKGD_INDEX_FIRST   0 // Index of the first background LED
+  //#define NEOPIXEL_BKGD_INDEX_LAST    5 // Index of the last background LED
   //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 }  // R, G, B, W
-  //#define NEOPIXEL_BKGD_ALWAYS_ON                   // Keep the backlight on when other NeoPixels are off
+  //#define NEOPIXEL_BKGD_ALWAYS_ON       // Keep the backlight on when other NeoPixels are off
 #endif
 
 /**