Kaynağa Gözat

Add UNKNOWN_Z_NO_RAISE to example configs

Scott Lahteine 6 yıl önce
ebeveyn
işleme
79e6d890d5
61 değiştirilmiş dosya ile 122 ekleme ve 0 silme
  1. 2
    0
      Marlin/src/config/default/Configuration.h
  2. 2
    0
      Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
  3. 2
    0
      Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
  4. 2
    0
      Marlin/src/config/examples/Anet/A6/Configuration.h
  5. 2
    0
      Marlin/src/config/examples/Anet/A8/Configuration.h
  6. 2
    0
      Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
  7. 2
    0
      Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
  8. 2
    0
      Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
  9. 2
    0
      Marlin/src/config/examples/BQ/Hephestos/Configuration.h
  10. 2
    0
      Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
  11. 2
    0
      Marlin/src/config/examples/BQ/WITBOX/Configuration.h
  12. 2
    0
      Marlin/src/config/examples/Cartesio/Configuration.h
  13. 2
    0
      Marlin/src/config/examples/Creality/CR-10/Configuration.h
  14. 2
    0
      Marlin/src/config/examples/Creality/CR-10S/Configuration.h
  15. 2
    0
      Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
  16. 2
    0
      Marlin/src/config/examples/Creality/Ender-2/Configuration.h
  17. 2
    0
      Marlin/src/config/examples/Creality/Ender-4/Configuration.h
  18. 2
    0
      Marlin/src/config/examples/Felix/Configuration.h
  19. 2
    0
      Marlin/src/config/examples/Felix/DUAL/Configuration.h
  20. 2
    0
      Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
  21. 2
    0
      Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
  22. 2
    0
      Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
  23. 2
    0
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
  24. 2
    0
      Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
  25. 2
    0
      Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
  26. 2
    0
      Marlin/src/config/examples/JGAurora/A5/Configuration.h
  27. 2
    0
      Marlin/src/config/examples/MakerParts/Configuration.h
  28. 2
    0
      Marlin/src/config/examples/Malyan/M150/Configuration.h
  29. 2
    0
      Marlin/src/config/examples/Malyan/M200/Configuration.h
  30. 2
    0
      Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
  31. 2
    0
      Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
  32. 2
    0
      Marlin/src/config/examples/Mks/Sbase/Configuration.h
  33. 2
    0
      Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
  34. 2
    0
      Marlin/src/config/examples/RigidBot/Configuration.h
  35. 2
    0
      Marlin/src/config/examples/SCARA/Configuration.h
  36. 2
    0
      Marlin/src/config/examples/STM32F10/Configuration.h
  37. 2
    0
      Marlin/src/config/examples/Sanguinololu/Configuration.h
  38. 2
    0
      Marlin/src/config/examples/TheBorg/Configuration.h
  39. 2
    0
      Marlin/src/config/examples/TinyBoy2/Configuration.h
  40. 2
    0
      Marlin/src/config/examples/Tronxy/X1/Configuration.h
  41. 2
    0
      Marlin/src/config/examples/Tronxy/X5S/Configuration.h
  42. 2
    0
      Marlin/src/config/examples/Tronxy/XY100/Configuration.h
  43. 2
    0
      Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
  44. 2
    0
      Marlin/src/config/examples/Velleman/K8200/Configuration.h
  45. 2
    0
      Marlin/src/config/examples/Velleman/K8400/Configuration.h
  46. 2
    0
      Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
  47. 2
    0
      Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
  48. 2
    0
      Marlin/src/config/examples/adafruit/ST7565/Configuration.h
  49. 2
    0
      Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
  50. 2
    0
      Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
  51. 2
    0
      Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
  52. 2
    0
      Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
  53. 2
    0
      Marlin/src/config/examples/delta/generic/Configuration.h
  54. 2
    0
      Marlin/src/config/examples/delta/kossel_mini/Configuration.h
  55. 2
    0
      Marlin/src/config/examples/delta/kossel_pro/Configuration.h
  56. 2
    0
      Marlin/src/config/examples/delta/kossel_xl/Configuration.h
  57. 2
    0
      Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
  58. 2
    0
      Marlin/src/config/examples/makibox/Configuration.h
  59. 2
    0
      Marlin/src/config/examples/stm32f103ret6/Configuration.h
  60. 2
    0
      Marlin/src/config/examples/tvrrug/Round2/Configuration.h
  61. 2
    0
      Marlin/src/config/examples/wt150/Configuration.h

+ 2
- 0
Marlin/src/config/default/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h Dosyayı Görüntüle

@@ -824,6 +824,8 @@
824 824
 
825 825
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
826 826
 
827
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
828
+
827 829
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
828 830
                              // Be sure you have this distance over your Z_MAX_POS in case.
829 831
 

+ 2
- 0
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Anet/A6/Configuration.h Dosyayı Görüntüle

@@ -879,6 +879,8 @@
879 879
 
880 880
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
881 881
 
882
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
883
+
882 884
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
883 885
                              // Be sure you have this distance over your Z_MAX_POS in case.
884 886
 

+ 2
- 0
Marlin/src/config/examples/Anet/A8/Configuration.h Dosyayı Görüntüle

@@ -811,6 +811,8 @@
811 811
 
812 812
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
813 813
 
814
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
815
+
814 816
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
815 817
                              // Be sure you have this distance over your Z_MAX_POS in case.
816 818
 

+ 2
- 0
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 #define Z_HOMING_HEIGHT 10  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 #define Z_HOMING_HEIGHT 10  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/BQ/Hephestos/Configuration.h Dosyayı Görüntüle

@@ -792,6 +792,8 @@
792 792
 
793 793
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
794 794
 
795
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
796
+
795 797
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
796 798
                              // Be sure you have this distance over your Z_MAX_POS in case.
797 799
 

+ 2
- 0
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h Dosyayı Görüntüle

@@ -805,6 +805,8 @@
805 805
 
806 806
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
807 807
 
808
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
809
+
808 810
 #define Z_HOMING_HEIGHT 5    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
809 811
                              // Be sure you have this distance over your Z_MAX_POS in case.
810 812
 

+ 2
- 0
Marlin/src/config/examples/BQ/WITBOX/Configuration.h Dosyayı Görüntüle

@@ -792,6 +792,8 @@
792 792
 
793 793
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
794 794
 
795
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
796
+
795 797
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
796 798
                              // Be sure you have this distance over your Z_MAX_POS in case.
797 799
 

+ 2
- 0
Marlin/src/config/examples/Cartesio/Configuration.h Dosyayı Görüntüle

@@ -803,6 +803,8 @@
803 803
 
804 804
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
805 805
 
806
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
807
+
806 808
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
807 809
                              // Be sure you have this distance over your Z_MAX_POS in case.
808 810
 

+ 2
- 0
Marlin/src/config/examples/Creality/CR-10/Configuration.h Dosyayı Görüntüle

@@ -814,6 +814,8 @@
814 814
 
815 815
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
816 816
 
817
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
818
+
817 819
 //#define Z_HOMING_HEIGHT 5  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
818 820
                              // Be sure you have this distance over your Z_MAX_POS in case.
819 821
 

+ 2
- 0
Marlin/src/config/examples/Creality/CR-10S/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 #define Z_HOMING_HEIGHT 4    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h Dosyayı Görüntüle

@@ -823,6 +823,8 @@
823 823
 
824 824
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
825 825
 
826
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
827
+
826 828
 //#define Z_HOMING_HEIGHT 5  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
827 829
                              // Be sure you have this distance over your Z_MAX_POS in case.
828 830
 

+ 2
- 0
Marlin/src/config/examples/Creality/Ender-2/Configuration.h Dosyayı Görüntüle

@@ -808,6 +808,8 @@
808 808
 
809 809
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
810 810
 
811
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
812
+
811 813
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
812 814
                              // Be sure you have this distance over your Z_MAX_POS in case.
813 815
 

+ 2
- 0
Marlin/src/config/examples/Creality/Ender-4/Configuration.h Dosyayı Görüntüle

@@ -814,6 +814,8 @@
814 814
 
815 815
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
816 816
 
817
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
818
+
817 819
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
818 820
                              // Be sure you have this distance over your Z_MAX_POS in case.
819 821
 

+ 2
- 0
Marlin/src/config/examples/Felix/Configuration.h Dosyayı Görüntüle

@@ -786,6 +786,8 @@
786 786
 
787 787
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
788 788
 
789
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
790
+
789 791
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
790 792
                              // Be sure you have this distance over your Z_MAX_POS in case.
791 793
 

+ 2
- 0
Marlin/src/config/examples/Felix/DUAL/Configuration.h Dosyayı Görüntüle

@@ -786,6 +786,8 @@
786 786
 
787 787
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
788 788
 
789
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
790
+
789 791
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
790 792
                              // Be sure you have this distance over your Z_MAX_POS in case.
791 793
 

+ 2
- 0
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h Dosyayı Görüntüle

@@ -811,6 +811,8 @@
811 811
 
812 812
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
813 813
 
814
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
815
+
814 816
 #define Z_HOMING_HEIGHT 2    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
815 817
                              // Be sure you have this distance over your Z_MAX_POS in case.
816 818
 

+ 2
- 0
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h Dosyayı Görüntüle

@@ -819,6 +819,8 @@
819 819
 
820 820
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
821 821
 
822
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
823
+
822 824
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
823 825
                              // Be sure you have this distance over your Z_MAX_POS in case.
824 826
 

+ 2
- 0
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 #define Z_HOMING_HEIGHT 8  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h Dosyayı Görüntüle

@@ -820,6 +820,8 @@
820 820
 
821 821
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
822 822
 
823
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
824
+
823 825
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
824 826
                              // Be sure you have this distance over your Z_MAX_POS in case.
825 827
 

+ 2
- 0
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h Dosyayı Görüntüle

@@ -819,6 +819,8 @@
819 819
 
820 820
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
821 821
 
822
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
823
+
822 824
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
823 825
                              // Be sure you have this distance over your Z_MAX_POS in case.
824 826
 

+ 2
- 0
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h Dosyayı Görüntüle

@@ -808,6 +808,8 @@
808 808
 
809 809
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
810 810
 
811
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
812
+
811 813
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
812 814
                              // Be sure you have this distance over your Z_MAX_POS in case.
813 815
 

+ 2
- 0
Marlin/src/config/examples/JGAurora/A5/Configuration.h Dosyayı Görüntüle

@@ -816,6 +816,8 @@
816 816
 
817 817
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
818 818
 
819
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
820
+
819 821
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
820 822
                              // Be sure you have this distance over your Z_MAX_POS in case.
821 823
 

+ 2
- 0
Marlin/src/config/examples/MakerParts/Configuration.h Dosyayı Görüntüle

@@ -824,6 +824,8 @@
824 824
 
825 825
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
826 826
 
827
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
828
+
827 829
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
828 830
                              // Be sure you have this distance over your Z_MAX_POS in case.
829 831
 

+ 2
- 0
Marlin/src/config/examples/Malyan/M150/Configuration.h Dosyayı Görüntüle

@@ -828,6 +828,8 @@
828 828
 
829 829
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
830 830
 
831
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
832
+
831 833
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
832 834
                              // Be sure you have this distance over your Z_MAX_POS in case.
833 835
 

+ 2
- 0
Marlin/src/config/examples/Malyan/M200/Configuration.h Dosyayı Görüntüle

@@ -803,6 +803,8 @@
803 803
 
804 804
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
805 805
 
806
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
807
+
806 808
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
807 809
                              // Be sure you have this distance over your Z_MAX_POS in case.
808 810
 

+ 2
- 0
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h Dosyayı Görüntüle

@@ -808,6 +808,8 @@
808 808
 
809 809
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
810 810
 
811
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
812
+
811 813
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
812 814
                              // Be sure you have this distance over your Z_MAX_POS in case.
813 815
 

+ 2
- 0
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h Dosyayı Görüntüle

@@ -808,6 +808,8 @@
808 808
 
809 809
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
810 810
 
811
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
812
+
811 813
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
812 814
                              // Be sure you have this distance over your Z_MAX_POS in case.
813 815
 

+ 2
- 0
Marlin/src/config/examples/Mks/Sbase/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/RigidBot/Configuration.h Dosyayı Görüntüle

@@ -802,6 +802,8 @@
802 802
 
803 803
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
804 804
 
805
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
806
+
805 807
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
806 808
                              // Be sure you have this distance over your Z_MAX_POS in case.
807 809
 

+ 2
- 0
Marlin/src/config/examples/SCARA/Configuration.h Dosyayı Görüntüle

@@ -815,6 +815,8 @@
815 815
 
816 816
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
817 817
 
818
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
819
+
818 820
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
819 821
                              // Be sure you have this distance over your Z_MAX_POS in case.
820 822
 

+ 2
- 0
Marlin/src/config/examples/STM32F10/Configuration.h Dosyayı Görüntüle

@@ -807,6 +807,8 @@
807 807
 
808 808
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
809 809
 
810
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
811
+
810 812
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
811 813
                              // Be sure you have this distance over your Z_MAX_POS in case.
812 814
 

+ 2
- 0
Marlin/src/config/examples/Sanguinololu/Configuration.h Dosyayı Görüntüle

@@ -835,6 +835,8 @@
835 835
 
836 836
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
837 837
 
838
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
839
+
838 840
 #define Z_HOMING_HEIGHT 4    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
839 841
                              // Be sure you have this distance over your Z_MAX_POS in case.
840 842
 

+ 2
- 0
Marlin/src/config/examples/TheBorg/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/TinyBoy2/Configuration.h Dosyayı Görüntüle

@@ -855,6 +855,8 @@
855 855
 
856 856
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
857 857
 
858
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
859
+
858 860
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
859 861
                              // Be sure you have this distance over your Z_MAX_POS in case.
860 862
 

+ 2
- 0
Marlin/src/config/examples/Tronxy/X1/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Tronxy/X5S/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 10 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Tronxy/XY100/Configuration.h Dosyayı Görüntüle

@@ -815,6 +815,8 @@
815 815
 
816 816
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
817 817
 
818
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
819
+
818 820
 #define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
819 821
                            // Be sure you have this distance over your Z_MAX_POS in case.
820 822
 

+ 2
- 0
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Velleman/K8200/Configuration.h Dosyayı Görüntüle

@@ -833,6 +833,8 @@
833 833
 
834 834
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
835 835
 
836
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
837
+
836 838
 // K8200: it is usual to have clamps for the glass plate on the heatbed
837 839
 #define Z_HOMING_HEIGHT 4   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
838 840
                             // Be sure you have this distance over your Z_MAX_POS in case.

+ 2
- 0
Marlin/src/config/examples/Velleman/K8400/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h Dosyayı Görüntüle

@@ -814,6 +814,8 @@
814 814
 
815 815
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
816 816
 
817
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
818
+
817 819
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
818 820
                              // Be sure you have this distance over your Z_MAX_POS in case.
819 821
 

+ 2
- 0
Marlin/src/config/examples/adafruit/ST7565/Configuration.h Dosyayı Görüntüle

@@ -804,6 +804,8 @@
804 804
 
805 805
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
806 806
 
807
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
808
+
807 809
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
808 810
                              // Be sure you have this distance over your Z_MAX_POS in case.
809 811
 

+ 2
- 0
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h Dosyayı Görüntüle

@@ -934,6 +934,8 @@
934 934
 
935 935
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
936 936
 
937
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
938
+
937 939
 #define Z_HOMING_HEIGHT 15   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
938 940
                              // Be sure you have this distance over your Z_MAX_POS in case.
939 941
 

+ 2
- 0
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h Dosyayı Görüntüle

@@ -934,6 +934,8 @@
934 934
 
935 935
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
936 936
 
937
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
938
+
937 939
 #define Z_HOMING_HEIGHT 15   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
938 940
                              // Be sure you have this distance over your Z_MAX_POS in case.
939 941
 

+ 2
- 0
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h Dosyayı Görüntüle

@@ -934,6 +934,8 @@
934 934
 
935 935
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
936 936
 
937
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
938
+
937 939
 #define Z_HOMING_HEIGHT 15   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
938 940
                              // Be sure you have this distance over your Z_MAX_POS in case.
939 941
 

+ 2
- 0
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h Dosyayı Görüntüle

@@ -936,6 +936,8 @@
936 936
 
937 937
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
938 938
 
939
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
940
+
939 941
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
940 942
                              // Be sure you have this distance over your Z_MAX_POS in case.
941 943
 

+ 2
- 0
Marlin/src/config/examples/delta/generic/Configuration.h Dosyayı Görüntüle

@@ -921,6 +921,8 @@
921 921
 
922 922
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
923 923
 
924
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
925
+
924 926
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
925 927
                              // Be sure you have this distance over your Z_MAX_POS in case.
926 928
 

+ 2
- 0
Marlin/src/config/examples/delta/kossel_mini/Configuration.h Dosyayı Görüntüle

@@ -924,6 +924,8 @@
924 924
 
925 925
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
926 926
 
927
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
928
+
927 929
 //#define Z_HOMING_HEIGHT 15 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
928 930
                              // Be sure you have this distance over your Z_MAX_POS in case.
929 931
 

+ 2
- 0
Marlin/src/config/examples/delta/kossel_pro/Configuration.h Dosyayı Görüntüle

@@ -924,6 +924,8 @@
924 924
 
925 925
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
926 926
 
927
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
928
+
927 929
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
928 930
                              // Be sure you have this distance over your Z_MAX_POS in case.
929 931
 

+ 2
- 0
Marlin/src/config/examples/delta/kossel_xl/Configuration.h Dosyayı Görüntüle

@@ -933,6 +933,8 @@
933 933
 
934 934
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
935 935
 
936
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
937
+
936 938
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
937 939
                              // Be sure you have this distance over your Z_MAX_POS in case.
938 940
 

+ 2
- 0
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h Dosyayı Görüntüle

@@ -817,6 +817,8 @@
817 817
 
818 818
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
819 819
 
820
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
821
+
820 822
 #define Z_HOMING_HEIGHT 10   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
821 823
                              // Be sure you have this distance over your Z_MAX_POS in case.
822 824
 

+ 2
- 0
Marlin/src/config/examples/makibox/Configuration.h Dosyayı Görüntüle

@@ -807,6 +807,8 @@
807 807
 
808 808
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
809 809
 
810
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
811
+
810 812
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
811 813
                              // Be sure you have this distance over your Z_MAX_POS in case.
812 814
 

+ 2
- 0
Marlin/src/config/examples/stm32f103ret6/Configuration.h Dosyayı Görüntüle

@@ -805,6 +805,8 @@
805 805
 
806 806
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
807 807
 
808
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
809
+
808 810
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
809 811
                              // Be sure you have this distance over your Z_MAX_POS in case.
810 812
 

+ 2
- 0
Marlin/src/config/examples/tvrrug/Round2/Configuration.h Dosyayı Görüntüle

@@ -799,6 +799,8 @@
799 799
 
800 800
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
801 801
 
802
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
803
+
802 804
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
803 805
                              // Be sure you have this distance over your Z_MAX_POS in case.
804 806
 

+ 2
- 0
Marlin/src/config/examples/wt150/Configuration.h Dosyayı Görüntüle

@@ -809,6 +809,8 @@
809 809
 
810 810
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
811 811
 
812
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
813
+
812 814
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
813 815
                              // Be sure you have this distance over your Z_MAX_POS in case.
814 816
 

Loading…
İptal
Kaydet